Computational fluid dynamic simulation of gravity and pressure effects in laser metal deposition for potential additive manufacturing in space

[1]  George Veronis,et al.  On the Boussinesq Approximation for a Compressible Fluid. , 1960 .

[2]  George Keith Batchelor,et al.  An Introduction to Fluid Dynamics. , 1969 .

[3]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[4]  V. Voller,et al.  A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems , 1987 .

[5]  R. Guthrie,et al.  The physical properties of liquid metals , 1988 .

[6]  V. Voller,et al.  The modelling of heat, mass and solute transport in solidification systems , 1989 .

[7]  J. M. Vitek,et al.  Correlation between solidification parameters and weld microstructures , 1989 .

[8]  Karthik Nagarathnam,et al.  Technology Assessment of Laser-Assisted Materials Processing in Space , 2001 .

[9]  Christopher J. Sutcliffe,et al.  Experimental investigation of nanosecond pulsed Nd:YAG laser re‐melted pre‐placed powder beds , 2001 .

[10]  K. Mills.  Recommended Values of Thermophysical Properties for Selected Commercial Alloys , 2001 .

[11]  Phill Dickens,et al.  Investigation of fully dense laser sintering of tool steel powder using a pulsed Nd: Yag (neodymium-doped yttrium aluminium garnet) laser , 2003 .

[12]  Lin Li,et al.  Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances , 2004 .

[13]  Lijun Han,et al.  Modeling and Experiments of Laser Cladding With Droplet Injection , 2005 .

[14]  V. Ocelík,et al.  Analysis of coaxial laser cladding processing conditions , 2005 .

[15]  D. F. Farson,et al.  Simulation of Weld Pool Dynamics in the Stationary Pulsed Gas Metal Arc Welding Process and Final Weld Shape A computer simulation accurately predicts weld pool fluid flow convection and final weld shape , 2006 .

[16]  W. Wang,et al.  Component repair using laser direct metal deposition , 2007 .

[17]  F. Liou,et al.  Modeling and Simulation of a Laser Deposition Process , 2007 .

[18]  D. Farson,et al.  Weld pool flows during initial stages of keyhole formation in laser welding , 2009 .

[19]  Lin Li,et al.  Modelling of the Melt Pool Geometry in the Laser Deposition of Nickel Alloys Using the Anisotropic Enhanced Thermal Conductivity Approach , 2011 .

[20]  Will Featherstone,et al.  A 1.5km-resolution gravity field model of the Moon , 2012 .

[21]  L. M. Kukreja,et al.  Laser rapid manufacturing on vertical surfaces: Analytical and experimental studies , 2013 .

[22]  A. Clare,et al.  A parametric study of Inconel 625 wire laser deposition , 2013 .

[23]  Neil Leach,et al.  3D Printing in Space , 2014 .

[24]  Christian Coddet,et al.  Investigation of the laser–powder–atmosphere interaction zone during the selective laser melting process , 2015 .

[25]  F. Lu,et al.  Effect of subatmospheric pressure on plasma plume in fiber laser welding , 2015 .

[26]  R. Long,et al.  The influence of scanning methods on the cracking failure of thin-wall metal parts fabricated by laser direct deposition shaping , 2016 .

[27]  D. Farson,et al.  Surface tension-powered build dimension control in laser additive manufacturing process , 2016 .

[28]  Carolin Körner,et al.  A multi-component evaporation model for beam melting processes , 2017 .

[29]  Fritz Klocke,et al.  Evaluation of the relevance of melt pool dynamics in Laser Material Deposition process modeling , 2017 .

[30]  Y. Shin,et al.  Laser direct deposition of AISI H13 tool steel powder with numerical modeling of solid phase transformation, hardness, and residual stresses , 2017 .