High Temperature Stability Of N-decanethiolBy Adsorption On Nickel PowdersUsed As Reforming Catalysts InSolid Oxide Fuel Cells (SOFC)

Solid Oxide Fuel Cells (SOFC) are among the most promising electricity producing technologies. Their successful implementation and versatility depends upon a number of still not fully solved technological issues; namely, the possibility of using both fossil and renewable energy vectors is one of the most significant. Such energy vectors, constituting a crucial SOFC feedstock, are the natural gas, the biogas and all forms of fossil and renewable liquid fuels like diesel, biodiesel, “green” diesel. These fuels require a conversion step because SOFC can use only H2 and CO. This conversion step is achieved through catalytic reforming and/or partial oxidation. The most successful catalysts are ceramic-supported bimetallic composites. The presence of sulphur in the fuels is detrimental to the catalysts and constitutes one of the basic hurdles in scaling-up and adopting commercially these conversion technologies. In this paper, the authors, based on their previous work on the role of sulphur on micronic Ni powders used as CH4 reforming catalysts, study the behaviour of medium size thiols adsorbed at the surface of the Ni powders and treated thermally in a differential reactor set-up. The Diffuse Reflectance Infra-red Fourier Transform Spectroscopy (DRIFTS) analyses before and after adsorption and thermal treatments have shown that these Ni surfaces stabilize the adsorbed hydrocarbon chains and alter their catalytic properties during reforming. These results are quite surprising and open the field to a positive synergy between surface chemists and engineers in an effort to better control the efficiency and improve the tolerance to sulphur of these reforming catalysts.

[1]  J. Delhalle,et al.  Formation and characterization of thin films of H(CH2)xPO(OH)2 on polycrystalline zinc substrates , 2002 .

[2]  Hiep Ly,et al.  Stability and Self-Exchange in Alkanethiol Monolayers , 1995 .

[3]  I. Lazar,et al.  IR characterization of a-C:H:N films sputtered in Ar/CH4/N2 plasma , 2003 .

[4]  R. Wolkow.  Controlled molecular adsorption on silicon: laying a foundation for molecular devices. , 1999, Annual review of physical chemistry.

[5]  F. Guittard,et al.  X-Ray photoelectron spectroscopy study of polycrystalline zinc modified by n-dodecanethiol and 3-perfluorooctyl-propanethiol , 2002 .

[6]  R. Nuzzo,et al.  Studies of the temperature-dependent phase behavior of long chain n-alkyl thiol monolayers on gold , 1990 .

[7]  George M. Whitesides,et al.  Patterned polymer growth on silicon surfaces using microcontact printing and surface-initiated polymerization , 1999 .

[8]  W. Hung,et al.  Adsorption and thermal reactions of alkanethiols on pt(111): Dependence on the length of the alkyl chain. , 2005, The journal of physical chemistry. B.

[9]  George M. Whitesides,et al.  Formation of monolayers by the coadsorption of thiols on gold: variation in the head group, tail group, and solvent , 1989 .

[10]  Sang Woo Han,et al.  Self-Assembled Monolayers of Aromatic Thiol and Selenol on Silver: Comparative Study of Adsorptivity and Stability , 2001 .

[11]  S. Noël,et al.  Surface modifications of nickel substrates with self-assembled monolayers of alkanethiols for electrical contact applications , 1998 .

[12]  M. Porter,et al.  Structure of monolayers of short chain n-alkanoic acids (CH3(CH2)nCOOH, n = 0-9) spontaneously adsorbed from the gas phase at silver as probed by infrared reflection spectroscopy , 1993 .

[13]  J. Delhalle,et al.  Self-assembly of (3-mercaptopropyl)trimethoxysilane on polycrystalline zinc substrates towards corrosion protection , 2003 .

[14]  A. Ulman,et al.  Formation and Structure of Self-Assembled Monolayers. , 1996, Chemical reviews.

[15]  Antonio J. Ricco,et al.  NEW ORGANIC MATERIALS SUITABLE FOR USE IN CHEMICAL SENSOR ARRAYS , 1998 .

[16]  W. Schirmer,et al.  Introduction to Surface Chemistry and Catalysis , 1995 .

[17]  H. Oudghiri-Hassani,et al.  Formation of thermally stable alkylidene layers on a catalytically active surface , 2001, Nature.

[18]  Han,et al.  Dodecanethiol-Derivatized Au/Ag Bimetallic Nanoparticles: TEM, UV/VIS, XPS, and FTIR Analysis. , 1998, Journal of colloid and interface science.

[19]  P. Ugliengo,et al.  The surface of ordered mesoporous benzene-silica hybrid material: an infrared and ab initio molecular modeling study. , 2005, The journal of physical chemistry. B.

[20]  C. Yeh,et al.  Adsorption and Thermal Decomposition of Alkanethiols on Cu(110) , 2002 .

[21]  J. Delhalle,et al.  Effect of the solvent on the formation of n-dodecanethiol films on a polycrystalline Ag90Ni10 substrate , 2003 .

[22]  N. Abatzoglou,et al.  A study of the surface properties and steam reforming catalytic activity of nickel powders impregnated by n-alkanethiols , 2006 .

[23]  K. Aramaki,et al.  One- and two-dimensional polymer films ofmodified alkanethiol monolayers for preventing iron fromcorrosion , 1999 .

[24]  J. Delhalle,et al.  Self-Assembled Monolayers of n-Dodecanethiol on Electrochemically Modified Polycrystalline Nickel Surfaces , 1997 .

[25]  J. Delhalle,et al.  Elaboration of Self-Assembled Monolayers of n-Alkanethiols on Nickel Polycrystalline Substrates: Time, Concentration, and Solvent Effects , 2003 .

[26]  Ralph G. Nuzzo,et al.  Fundamental studies of microscopic wetting on organic surfaces. 1. Formation and structural characterization of a self-consistent series of polyfunctional organic monolayers , 1990 .

[27]  R. Madix,et al.  Reactivity of Sulfur-Containing Molecules on Noble Metal Surfaces. 2. tert-Butyl Thioalcohol on Au(110) , 1994 .

[28]  R. Nuzzo,et al.  Fundamental Studies of the Chemisorption of Organosulfur Compounds on Au( 111). Implications for Molecular Self-Assembly on Gold Surfaces , 1987 .

[29]  A. Chagnes,et al.  Rational design of original materials for the electrocatalytic hydrogenation reactions: concept, preparation, characterization, and theoretical analysis. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[30]  R. Murray,et al.  Infrared Spectroscopy of Three-Dimensional Self-Assembled Monolayers: N-Alkanethiolate Monolayers on Gold Cluster Compounds , 1996 .

[31]  R. Nuzzo,et al.  Synthesis, Structure, and Properties of Model Organic Surfaces , 1992 .

[32]  Chinkap Chung,et al.  Exchange of self-assembled thiol monolayers on gold: characterization by FT-IR external reflection spectroscopy , 1999 .

[33]  J. Delhalle,et al.  Surface coating of a Cu-Ni alloy with a self-assembled monolayer of n-dodecanethiol , 2002 .

[34]  Weiping Ding,et al.  Methane Conversion to Aromatics on Mo/H-ZSM5: Structure of Molybdenum Species in Working Catalysts , 2001 .

[35]  B. Koel,et al.  TPD and FT-IRAS investigation of ethylene oxide (EtO) adsorption on a Au(211) stepped surface. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[36]  P. Jacobsson,et al.  Preparation of proton-conducting membranes by direct sulfonation. 1. Effect of radicals and radical decay on the sulfonation of poly(vinyl fluoride) films , 2003 .