论文信息 - Upgrade of A Robot Workstation for Positioning of Measuring Objects on CMM

Upgrade of A Robot Workstation for Positioning of Measuring Objects on CMM

In order to decrease the measuring cycle time on the coordinate measuring machine (CMM) a robot workstation for the positioning of measuring objects was created. The application of a simple 5-axis industrial robot enables the positioning of the objects within the working space of CMM and measuring of different surfaces on the same object without human intervention. In this article an upgrade of an existing robot workstation through different design measures is shown. The main goal of this upgrade is to improve the measuring accuracy of the complex robot-CMM system.

Samir Lemes | Damir Strbac | Malik Cabaravdic | Deni Sabic

[1] Ralph C. Veale,et al. Error Compensation of Coordinate Measuring Machines , 1985 .

[2] Samir Lemes,et al. Using Industrial Robots to Manipulate the Measured Object in CMM , 2014, ArXiv.

[3] Jorge Santolaria,et al. Kinematic Calibration of Articulated Arm Coordinate Measuring Machines and Robot Arms Using Passive and Active Self-Centering Probes and Multipose Optimization Algorithm Based in Point and Length Constrains , 2010 .

[4] Gianfranco Genta,et al. Measurement uncertainty assessment of Coordinate Measuring Machines by simulation and planned experimentation , 2011 .

[5] Bonnie Lawford,et al. UNCERTAINTY ANALYSIS AND QUALITY ASSURANCE FOR COORDINATE MEASURING SYSTEM SOFTWARE , 2003 .

[6] C. Y. Fang,et al. Measurement uncertainty analysis of CMM with ISO GUM , 2005 .