Optimization of a multi-response problem in Taguchi's dynamic system

Taguchi method was known as an off-line quality control methodology to be used in many industries. Until now, most applications only focus on optimizing a single-response in a static system. Furthermore, due to the increasing complexity of the product design, more than one quality characteristic must be considered simultaneously to improve the production quality. Therefore, there are several studies to address the multi-response problem. In order to satisfy the requirements of the production's design, optimization of a dynamic system been mentioned by Taguchi has received more attentions in the recent years. Hence, optimizing a multi-response problem in a dynamic system becomes an important issue to address the quality improvement. This study proposes a procedure utilizing the statistic regression analysis and desirability function to optimize the multi-response problem with Taguchi's dynamic system consideration. Firstly, the regression analysis is employed to screen out the control factors significantly affecting the quality variation, and the adjustment factors significantly affecting the sensitivity of a Taguchi's dynamic system. Then, the desirability function will be applied to optimize such a multi-response problem. Finally, the effectiveness of the proposed procedure will be demonstrated by an example of a biological reduction of ethyl acetoacetate process experiment project at the Union Chemical Laboratories of the Industrial Technology Research Institute in Taiwan.

[1]  Madhan Shridhar Phadke,et al.  Quality Engineering Using Robust Design , 1989 .

[2]  Elsayed A. Elsayed,et al.  Optimal levels of process parameters for products with multiple characteristics , 1993 .

[3]  Lee-Ing Tong,et al.  Optimization of multiple quality responses involving qualitative and quantitative characteristics in IC manufacturing using neural networks , 2001, Comput. Ind..

[4]  Robert L. Mason,et al.  Taguchi Methods: A Hands-On Approach , 1994 .

[5]  Susan L. Albin,et al.  A COMPARISON OF MULTIRESPONSE OPTIMIZATION SENSITIVITY TO PARAMETER SELECTION , 1999 .

[6]  G. Derringer,et al.  Simultaneous Optimization of Several Response Variables , 1980 .

[7]  Li Tong,et al.  Multi-response optimization using principal component analysis and grey relational analysis , 2002 .

[8]  Chung-Ho Wang,et al.  Dynamic multi-response optimization using principal component analysis and multiple criteria evaluation of the grey relation model , 2007 .

[9]  Jiju Antony,et al.  Multi‐response optimization in industrial experiments using Taguchi's quality loss function and principal component analysis , 2000 .

[10]  William T. Scherer,et al.  "The desirability function: underlying assumptions and application implications" , 1998, SMC'98 Conference Proceedings. 1998 IEEE International Conference on Systems, Man, and Cybernetics (Cat. No.98CH36218).

[11]  Kailash C. Kapur,et al.  Signal‐to‐noise ratio development for quality engineering , 1988 .

[12]  William Y. Fowlkes,et al.  Engineering Methods for Robust Product Design: Using Taguchi Methods in Technology and Product Development , 1995 .

[13]  Lee-Ing Tong,et al.  A NOVEL MEANS OF APPLYING NEURAL NETWORKS TO OPTIMIZE THE MULTIRESPONSE PROBLEM , 2001 .

[14]  Gary S. Wasserman.  Parameter design with dynamic characteristics : A regression perspective , 1996 .