Experimental investigation of the effect of phase change materials on the behavior of battery at high-rate discharge in electric tools

[1]  Yang Wang,et al.  A battery thermal management scheme suited for cold regions based on PCM and aerogel: Demonstration of performance and availability , 2023, Applied Thermal Engineering.

[2]  S. Matthiesen,et al.  Analysis of the influence of feed and lateral force on productivity and hand-arm vibration in interaction with drill bit wear and concrete strength , 2022, International Journal of Industrial Ergonomics.

[3]  M. Wohlfahrt‐Mehrens,et al.  Arrhenius plots for Li-ion battery ageing as a function of temperature, C-rate, and ageing state – An experimental study , 2022, Journal of Power Sources.

[4]  Mihir Kumar das,et al.  Thermal Runaway Management of Li ion Battery using PCM: A Parametric Study , 2022, Energy Conversion and Management: X.

[5]  Yang Liu,et al.  High latent heat phase change materials (PCMs) with low melting temperature for thermal management and storage of electronic devices and power batteries: Critical review , 2022, Renewable and Sustainable Energy Reviews.

[6]  Hoseong Lee,et al.  Development of a hybrid battery thermal management system coupled with phase change material under fast charging conditions , 2022, Energy Conversion and Management.

[7]  M. Fowler,et al.  Simulation of cooling plate effect on a battery module with different channel arrangement , 2022, Journal of Energy Storage.

[8]  Ismail,et al.  Improving the Phase Transition Characteristic and Latent Heat Storage Efficiency by Forming Polymer-Based Shape-Stabilized PCM for Active Latent Storage System , 2022, SSRN Electronic Journal.

[9]  Meirui Zhong,et al.  The technological innovation efficiency of China's lithium-ion battery listed enterprises: Evidence from a three-stage DEA model and micro-data , 2022, Energy.

[10]  J. Luo,et al.  Battery thermal management systems (BTMs) based on phase change material (PCM): A comprehensive review , 2022, Chemical Engineering Journal.

[11]  Yelin Deng,et al.  The electrochemical model coupled parameterized life cycle assessment for the optimized design of EV battery pack , 2022, The International Journal of Life Cycle Assessment.

[12]  F. Zhang,et al.  Optimization design for improving thermal performance of T-type air-cooled lithium-ion battery pack , 2021, Journal of Energy Storage.

[13]  Guoqing Zhang,et al.  Flexible phase change materials obtained from a simple solvent-evaporation method for battery thermal management , 2021, Journal of Energy Storage.

[14]  Guoqing Zhang,et al.  Experimental study on thermal behavior of PCM-module coupled with various cooling strategies under different temperatures and protocols , 2021 .

[15]  Michael Negnevitsky,et al.  A review of air-cooling battery thermal management systems for electric and hybrid electric vehicles , 2021, Journal of Power Sources.

[16]  M. Berecibar,et al.  Comprehensive Passive Thermal Management Systems for Electric Vehicles , 2021, Energies.

[17]  R. Bakri,et al.  Coupled electro-thermal modeling of lithium-ion batteries for electric vehicle application , 2021 .

[18]  Allison Stephens,et al.  A survey of right-angle power tool use in canadian automotive assembly plants. , 2020, Applied ergonomics.

[19]  Rohit Bhagat,et al.  Air and PCM cooling for battery thermal management considering battery cycle life , 2020, Applied Thermal Engineering.

[20]  Zhengguo Zhang,et al.  Liquid cooling with phase change materials for cylindrical Li-ion batteries: An experimental and numerical study , 2020 .

[21]  Guoqing Zhang,et al.  Thermal performance of PCM and branch-structured fins for cylindrical power battery in a high-temperature environment , 2019, Energy Conversion and Management.

[22]  Jingwen Weng,et al.  Optimization of the detailed factors in a phase-change-material module for battery thermal management , 2019, International Journal of Heat and Mass Transfer.

[23]  Liwen Jin,et al.  A comprehensive experimental study on temperature-dependent performance of lithium-ion battery , 2019, Applied Thermal Engineering.

[24]  Dibakar Rakshit,et al.  A comparative study on battery thermal management using phase change material (PCM) , 2019, Thermal Science and Engineering Progress.

[25]  Mengxuan Song,et al.  Design of the structure of battery pack in parallel air-cooled battery thermal management system for cooling efficiency improvement , 2019, International Journal of Heat and Mass Transfer.

[26]  Y. Ran,et al.  Novel leaf-like channels for cooling rectangular lithium ion batteries , 2019, Applied Thermal Engineering.

[27]  W. Cheng,et al.  Thermal management of Li-ion battery pack with the application of flexible form-stable composite phase change materials , 2019, Energy Conversion and Management.

[28]  Guoming Chen,et al.  Investigation on thermal management performance of PCM-fin structure for Li-ion battery module in high-temperature environment , 2018, Energy Conversion and Management.

[29]  Bill J. Van Heyst,et al.  A comprehensive review on a passive (phase change materials) and an active (thermoelectric cooler) battery thermal management system and their limitations , 2018, Journal of Power Sources.

[30]  Chao-Yang Wang,et al.  Understanding the trilemma of fast charging, energy density and cycle life of lithium-ion batteries , 2018, Journal of Power Sources.

[31]  Michael Pecht,et al.  Li-Ion Battery Fire Hazards and Safety Strategies , 2018, Energies.

[32]  Zhengguo Zhang,et al.  Thermal management performance of phase change materials with different thermal conductivities for Li-ion battery packs operated at low temperatures , 2018 .

[33]  Simon F. Schuster,et al.  Nonlinear aging characteristics of lithium-ion cells under different operational conditions , 2015 .

[34]  Guofeng Chang,et al.  Experiment and simulation of a LiFePO4 battery pack with a passive thermal management system using composite phase change material and graphite sheets , 2015 .

[35]  M. Verbrugge,et al.  Degradation of lithium ion batteries employing graphite negatives and nickel-cobalt-manganese oxide + spinel manganese oxide positives: Part 1, aging mechanisms and life estimation , 2014 .

[36]  D. Sauer,et al.  Calendar and cycle life study of Li(NiMnCo)O2-based 18650 lithium-ion batteries , 2014 .

[37]  Aikun Tang,et al.  Experimental evaluation of heat conduction enhancement and lithium-ion battery cooling performance based on h-BN-based composite phase change materials , 2022, International Journal of Heat and Mass Transfer.

[38]  Yelin Deng,et al.  The distributed temperature abatement by the phase changing materials for battery in electric tools and its influence on aging , 2022, Sustainable Energy Technologies and Assessments.

[39]  Zhan-jun Liu,et al.  Experimental investigation on a novel phase change material composites coupled with graphite film used for thermal management of lithium-ion batteries , 2020 .

[40]  Guoqing Zhang,et al.  Composite phase change material with room-temperature-flexibility for battery thermal management , 2022 .