Estimation of explosion energy based on fragment characteristics

Abstract Explosions of vessels containing high pressure gases or superheated liquids are a common accident in the chemical industry. Fragments are the most information-rich physical evidence in accident analysis. A method is presented to calculate the total explosion energy based on the characteristics of fragments from the scene of an accident, such as mass, horizontal displacement, etc. The implicit expressions of the initial velocity can be obtained through analysing the trajectory equations of the fragments and the data obtained from the scene of the accident. The total energy is calculated from the relationship between the total explosion energy and the kinetic energy of the fragment. During the calculation there are some uncertain parameters, e.g., the energy factor and the initial angle. To solve the parameter uncertainties, a Monte-Carlo simulation is introduced. Analysis of an industrial accident shows that it is feasible to estimate the total explosion energy using the maximum probability density interval with the proposed methodology.

[1]  M. Baum,et al.  Rocket missiles generated by failure of a high pressure liquid storage vessel , 1998 .

[2]  Ahmed Mebarki,et al.  Structural fragments and explosions in industrial facilities: Part II – Projectile trajectory and probability of impact , 2009 .

[3]  H. Takahashi,et al.  Deformation and fragmentation behaviour of exploded metal cylinders and the effects of wall materials, configuration, explosive energy and initiated locations , 2008 .

[4]  Yang Yu-sheng.  Monte-Carlo Numerical Simulation on the Most Probable Flight Distance of Fragments from Explosion of Storage Tanks , 2008 .

[5]  M. R. Baum,et al.  Rupture of a gas-pressurized cylindrical vessel: the velocity of a detached end-cap , 1995 .

[6]  Daniel A. Crowl,et al.  Chemical Process Safety: Fundamentals with Applications , 2001 .

[7]  Valerio Cozzani,et al.  Assessment of missile hazards: evaluation of the fragment number and drag factors. , 2009, Journal of hazardous materials.

[8]  M. R. Baum.  Velocity of a single small missile ejected from a vessel containing high pressure gas , 1993 .

[9]  M. R. Baum.  The velocity of end-cap and rocket missiles generated by failure of a gas pressurised vessel containing particulate material , 1999 .

[10]  F. Mercier,et al.  Integrated probabilistic framework for domino effect and risk analysis , 2009, Adv. Eng. Softw..

[11]  M. R. Baum,et al.  Disruptive failure of pressure vessels: preliminary design guidelines for fragment velocity and the extent of the hazard zone , 1988 .

[12]  S. S. Grossel,et al.  Guidelines for Evaluating the Characteristics of Vapour Cloud Explosions, Flash Fires and BLEVEs , 1996 .

[13]  M. R. Baum.  The velocity of large missiles resulting from axial rupture of gas pressurised cylindrical vessels , 2001 .

[14]  M. R. Baum.  Failure of a horizontal pressure vessel containing a high temperature liquid: the velocity of end-cap and rocket missiles , 1999 .

[15]  Liu Zhenyi.  Monte-Carlo analysis of fragments projectile from spherical tank BLEVE , 2009 .

[16]  Brian Veitch,et al.  A model for estimating the probability of missile impact: Missiles originating from bursting horizontal cylindrical vessels , 2007 .

[17]  Bo Hu,et al.  Energy estimation on ethylene sphere explosion , 2000 .

[18]  Ulrich Hauptmanns.  A procedure for analyzing the flight of missiles from explosions of cylindrical vessels , 2001 .

[19]  Valerio Cozzani,et al.  A simplified model for the assessment of the impact probability of fragments. , 2004, Journal of hazardous materials.

[20]  U. Hauptmanns.  A Monte-Carlo based procedure for treating the flight of missiles from tank explosions , 2001 .

[21]  Jiang Jun-cheng,et al.  Monte-Carlo Analysis of the Flight of Missiles from LPG Tank Explosion , 2004 .

[22]  Ahmed Mebarki,et al.  Structural fragments and explosions in industrial facilities: Part I - Probabilistic description of the source terms , 2009 .