On-chip GaAs-HBT broadband-coupled high-bitrate modulator driver TWAs

A technique to connect two broadband GaAs HBT TWAs is presented. It covers the full range from DC to high frequency and is suitable for high bitrate (40 Gb/s) transmission circuits. This behavior is achieved by modifying the response of one TWA so that it compensates the low-frequency losses. This technique is truly broadband because it uses only elements which are directly connected, and thus is not limited at very low frequencies. Each single TWA delivers 8 dB of broadband gain at a 3dB cut-off-frequency of 26 GHz. Using this interconnect technique, a total broadband gain of 14.5 dB is obtained.

[1]  Y. Baeyens,et al.  A 74-GHz bandwidth InAlAs/InGaAs-InP HBT distributed amplifier with 13-dB gain , 1999, IEEE Microwave and Guided Wave Letters.

[2]  W. Heinrich,et al.  A 40 Gbps broadband amplifler for modulator- driver applications using a GaAs HBT technology , 2004, Bipolar/BiCMOS Circuits and Technology, 2004. Proceedings of the 2004 Meeting.

[3]  C. Joly,et al.  40 Gbit/s GaAs P-HEMT driver module for optical communications , 1998 .

[4]  Matthias Rudolph,et al.  Unified model for collector charge in heterojunction bipolar transistors , 2002 .

[7]  Tatsuya Hirose,et al.  A 54-GHz distributed amplifier with 6-VPP output for a 40-Gb/s LiNbO3 modulator driver , 2002, IEEE J. Solid State Circuits.

[8]  Matthias Rudolph,et al.  Scalable GaInP/GaAs HBT large-signal model , 2000, IEEE MTT-S International Microwave Symposium Digest.

[9]  W. Heinrich,et al.  Low phase noise MMIC VCOs for Ka-band applications with improved GaInP/GaAs-HBT technology , 2003, 25th Annual Technical Digest 2003. IEEE Gallium Arsenide Integrated Circuit (GaAs IC) Symposium, 2003..