Crashworthiness optimization of automotive parts with tailor rolled blank

Abstract Tailor rolled blank (TRB) as an advanced manufacturing process developed recently has broad application prospects in automotive and aerospace industries for its significant advantages in better load-carrying ability and lighter mass. TRB is a typical custom product, whose performance is closely related to its thickness variation, thus how to obtain the optimal thickness variation of a TRB part becomes a challenging task, especially for crashworthiness design. To address this issue, an optimization method based on the variation of wall thickness is presented to maximize the energy absorption capacity of TRB parts. Firstly, finite element (FE) models of two typical automotive parts, TRB top-hat column and TRB bumper beam, are established and validated through crushing experiments. Then a heuristic optimization method is proposed based on the general assumption that more mass enables to absorb more energy. The elemental energy density is used to optimize structural thickness distribution of geometrical and material nonlinear structures. Numerical results demonstrate the capability and effectiveness of the proposed optimization method for achieving the best thickness layout of automotive TRB parts for crashworthiness.

[1]  Xiaodong Huang,et al.  Topological design of structures under dynamic periodic loads , 2017 .

[2]  Yi Min Xie,et al.  Topology optimization of energy-absorbing structures , 2007 .

[3]  Qian Wang,et al.  Modeling and optimization of foam-filled thin-walled columns for crashworthiness designs , 2010 .

[4]  James P. Schmiedeler,et al.  Design of Crashworthy Structures With Controlled Energy Absorption in the Hybrid Cellular Automaton Framework , 2013 .

[5]  Jie Yang,et al.  Optimal microstructures of elastoplastic cellular materials under various macroscopic strains , 2017 .

[6]  Qing Li,et al.  On energy absorption of functionally graded tubes under transverse loading , 2016 .

[7]  Qing Li,et al.  Bending characteristics of top-hat structures through tailor rolled blank (TRB) process , 2018 .

[8]  Shutian Liu,et al.  Design optimization of cross-sectional configuration of rib-reinforced thin-walled beam , 2009 .

[9]  John E. Renaud,et al.  Strain-based topology optimisation for crashworthiness using hybrid cellular automata , 2011 .

[10]  Jianguang Fang,et al.  Topology Optimization of Multicell Tubes Under Out-of-Plane Crushing Using a Modified Artificial Bee Colony Algorithm , 2017 .

[11]  Fabian Duddeck,et al.  Improved hybrid cellular automata for crashworthiness optimization of thin-walled structures , 2017 .

[12]  Fabian Duddeck,et al.  Topology optimization for crashworthiness of thin-walled structures under axial impact using hybrid cellular automata , 2016 .

[13]  Yucheng Liu,et al.  Crashworthiness design of multi-corner thin-walled columns , 2008 .

[14]  Shu Yang,et al.  Multiobjective optimization for empty and foam-filled square columns under oblique impact loading , 2013 .

[15]  Qing Li,et al.  An experimental and numerical study on quasi-static and dynamic crashing behaviors for tailor rolled blank (TRB) structures , 2017 .

[16]  P. Pothuraju,et al.  Multidisciplinary design optimization on vehicle tailor rolled blank design , 2008 .

[17]  Yunkai Gao,et al.  Crashworthiness analysis and design of multi-cell hexagonal columns under multiple loading cases , 2015 .

[18]  Shiwei Zhou,et al.  Topology optimization for 3D microstructures of viscoelastic composite materials , 2021 .

[19]  Qing Li,et al.  Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness , 2014 .

[20]  Qian Peng,et al.  Lightweight Design of B-pillar with TRB Concept Considering Crashworthiness , 2012, 2012 Third International Conference on Digital Manufacturing & Automation.

[21]  Baohua Jia,et al.  Bi-directional evolutionary optimization for photonic band gap structures , 2015, J. Comput. Phys..

[22]  Jianguang Fang,et al.  Configurational optimization of multi-cell topologies for multiple oblique loads , 2018 .

[23]  Qing Li,et al.  Theoretical, numerical, and experimental study on laterally variable thickness (LVT) multi-cell tubes for crashworthiness , 2016 .

[24]  Xiaodong Huang,et al.  Dynamical bending analysis and optimization design for functionally graded thickness (FGT) tube , 2015 .

[25]  Gyung-Jin Park,et al.  Nonlinear dynamic response topology optimization using the equivalent static loads method , 2012 .

[26]  Jianguang Fang,et al.  Multi-objective and multi-case reliability-based design optimization for tailor rolled blank (TRB) structures , 2017 .

[27]  David P. Thambiratnam,et al.  A numerical study on the impact response and energy absorption of tapered thin-walled tubes , 2004 .

[28]  Masoud Rais-Rohani,et al.  Mechanics of axial plastic collapse in multi-cell, multi-corner crush tubes , 2011 .

[29]  Aiguo Cheng,et al.  Crashworthiness design of vehicle structure with tailor rolled blank , 2016 .

[30]  R. Kopp,et al.  Flexibly Rolled Sheet Metal and Its Use in Sheet Metal Forming , 2005 .

[31]  Xiaodong Huang,et al.  Topological configuration analysis and design for foam filled multi-cell tubes , 2018 .

[32]  T. Wierzbicki,et al.  Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption , 2001 .

[33]  Axel Schumacher,et al.  Graph and heuristic based topology optimization of crash loaded structures , 2013 .

[34]  Alexander Meyer,et al.  Increasing of the drawing depth using tailor rolled blanks—Numerical and experimental analysis , 2008 .

[35]  Heung-Soo Kim,et al.  New extruded multi-cell aluminum profile for maximum crash energy absorption and weight efficiency , 2002 .

[36]  Jianguang Fang,et al.  On design optimization for structural crashworthiness and its state of the art , 2017 .

[37]  A. Alavi Nia,et al.  An investigation on the energy absorption characteristics of multi-cell square tubes , 2013 .

[38]  W. Abramowicz,et al.  Thin-walled structures as impact energy absorbers , 2003 .

[39]  Jianguang Fang,et al.  Dynamic crashing behavior of new extrudable multi-cell tubes with a functionally graded thickness , 2015 .

[40]  Qing Li,et al.  Crashworthiness design for functionally graded foam-filled bumper beam , 2015, Adv. Eng. Softw..

[41]  Yunkai Gao,et al.  Topological design of multi-cell hexagonal tubes under axial and lateral loading cases using a modified particle swarm algorithm , 2018 .

[42]  Mark White,et al.  Experimental quasi-static axial crushing of top-hat and double-hat thin-walled sections , 1999 .

[43]  Guangyao Li,et al.  Crashworthiness optimization of foam-filled tapered thin-walled structure using multiple surrogate models , 2013 .

[44]  G. Cheng,et al.  A comparative study of energy absorption characteristics of foam-filled and multi-cell square columns , 2007 .

[45]  Ali Limam,et al.  Experimental and numerical investigation of static and dynamic axial crushing of circular aluminum tubes , 2004 .

[46]  Norman Jones,et al.  Dynamic axial crushing of circular tubes , 1984 .

[47]  Xiong Zhang,et al.  Axial crushing and optimal design of square tubes with graded thickness , 2014 .