Microlens array fabrication by enhanced thermal reflow process: Towards efficient collection of fluorescence light from microarrays

This paper describes two enhanced resist reflow methods for the fabrication of microlens arrays and demonstrates their use for integrated biomolecular fluorescence detection on printed microarrays. A PDMS (polydimethylsiloxane) microlens array was fabricated by a double soft lithography approach using a photoresist microlens array as master mold. Additionally, by using both a careful control of the surface wettability and thermal treatments, we demonstrate the possibility to extend the resist reflow process in order to tune the diameters of microlens array over a large range by using a unique photomask pattern. We introduce an enhanced reflow on hydrophobic surfaces obtained by fluorosilane treatment and identify a threshold shrinkage temperature (T"s"h"r"i"n"k"a"g"e) of 140^oC, above which the diameter of microlenses can be then reduced down to 40% compared with the initial pattern on the photomask. Furthermore, on hydrophilic substrates, achieved by an accurate incomplete development of the photoresist, we demonstrate a nearly perfect linear dependency ([email protected]/^oC) of microlens diameter spreading up to 70% the initial diameter inside a temperature reflow window of 110-140^oC. For both approaches, above a freezing temperature (T"f"r"e"e"z"i"n"g) of 170^oC, the microlens profile characteristics are temperature independent. By using high numerical aperture microlens array, we provide a proof of concept for the integration and enhanced light collection of the fluorescent signals collected form a microarray of fluorescent spots thus showing the potential of the concept for biophotonic integration.

[1]  Hsiharng Yang,et al.  Fabrication of a microlens array electroformed mold with low roughness and high hardness , 2007 .

[2]  S C Esener,et al.  Characterization of a polymer microlens fabricated by use of the hydrophobic effect. , 2000, Optics letters.

[3]  N. S. Ong,et al.  Microlens array produced using hot embossing process , 2002 .

[4]  Toshihiro Kamei,et al.  Integrated hydrogenated amorphous Si photodiode detector for microfluidic bioanalytical devices. , 2003, Analytical chemistry.

[5]  R Stanley Williams,et al.  Vapor-phase self-assembled monolayer for improved mold release in nanoimprint lithography. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[6]  Weisong Wang,et al.  Variable-focusing microlens with microfluidic chip , 2004 .

[7]  R. Anderson.  Close-up imaging of documents and displays with lens arrays. , 1979, Applied optics.

[8]  M. Gretillat,et al.  Vertical mirrors fabricated by deep reactive ion etching for fiber-optic switching applications , 1997 .

[9]  M. Belotti,et al.  Microfluidic tunable dye laser with integrated mixer and ring resonator , 2005 .

[10]  Hans Peter Herzig,et al.  Surface profiles of reflow microlenses under the influence of surface tension and gravity , 2000 .

[11]  H. S. Hinton,et al.  Optical interconnections using microlens arrays , 1992 .

[12]  Marco Severi,et al.  Etching selectivity control during resist pattern transfer into silica for the fabrication of microlenses with reduced spherical aberrations , 1999 .

[13]  Bénédicte Mortini,et al.  Study of mechanisms involved in photoresist microlens formation , 2006 .

[14]  Hans Peter Herzig,et al.  Replicated arrays of hybrid elements for application in a low-cost micro-spectrometer array , 2000 .

[15]  R. Völkel,et al.  Fabrication of multilayer systems combining microfluidic and microoptical elements for fluorescence detection , 2001 .

[16]  A high-sag microlens array film with a full fill factor and its application to organic light emitting diodes , 2008 .

[17]  Larry A. Coldren,et al.  Fabrication of refractive microlenses in semiconductors by mask shape transfer in reactive ion etching , 1997 .

[18]  A. M. Jorgensen,et al.  Lab-on-a-chip with integrated optical transducers. , 2006, Lab on a chip.

[19]  P. Nussbaum,et al.  Design, fabrication and testing of microlens arrays for sensors and microsystems , 1997 .

[20]  Ching-Kong Chao,et al.  High fill-factor microlens array mold insert fabrication using a thermal reflow process , 2004 .

[21]  Po-Hsun Huang,et al.  Fabrication of microlens arrays using UV micro-stamping with soft roller and gas-pressurized platform , 2008 .

[22]  E. Verpoorte.  Chip vision-optics for microchips. , 2003, Lab on a chip.

[24]  Clifford L. Henderson,et al.  Photoresist characterization for lithography simulation: III. Development parameter measurements , 1997, Advanced Lithography.

[25]  G. Connell,et al.  Technique for monolithic fabrication of microlens arrays. , 1988, Applied optics.

[26]  K. Mogensen,et al.  Integration of polymer waveguides for optical detection in microfabricated chemical analysis systems. , 2003, Applied optics.

[27]  Clifford L. Henderson,et al.  Photoresist characterization for lithography simulation: II. Exposure parameter measurements , 1997, Advanced Lithography.

[28]  Chris A. Mack,et al.  New model for the effect of developer temperature on photoresist dissolution , 1998, Advanced Lithography.