Development of strength models for brick walls: Experimental and theoretical study

[1]  John Bosco Niyomukiza,et al.  Enhancing Properties of Unfired Clay Bricks Using Palm Fronds and Palm Seeds , 2022, Results in Engineering.

[2]  D. Mostofinejad,et al.  A novel parallel wire steel-reinforced mortar (PW-SRM) method versus textile reinforced mortar (TRM) for out-of-plane strengthening of masonry walls , 2022, Journal of Building Engineering.

[3]  K. Chaiyasarn,et al.  An Investigative Study for the Prediction of Compressive Strength of Cement-clay Interlocking (CCI) Hollow Brick Masonry Walls , 2022, Case Studies in Construction Materials.

[4]  H. Varum,et al.  Influence of textile reinforced mortars strengthening on the in-plane/out-of-plane response of masonry infill walls in RC frames , 2022, Engineering Structures.

[5]  K. Chaiyasarn,et al.  Experimental Study on the Out-of-Plane Behavior of Brick Masonry Walls Strengthened with Mortar and Wire Mesh: A Pioneer Study , 2021, Infrastructures.

[6]  H. Khan.  Numerical Study of GFRP Strengthened Brick Masonry Wallette , 2021, Resilient Infrastructure.

[7]  R. P. Nanda,et al.  Out-of-plane bending of masonry wallette strengthened with geosynthetic , 2020 .

[8]  D. Das,et al.  Numerical Analysis of Geosynthetic Strengthened Brick Masonry Panels , 2020 .

[9]  H. B. Aravind,et al.  Digital image correlation (DIC) for measuring strain in brick masonry specimen using Ncorr open source 2D MATLAB program , 2019 .

[10]  Qudeer Hussain,et al.  PERFORMANCE OF CEMENT CLAY INTERLOCKING HOLLOW BRICK MASONRY WALLS SUBJECTED TO DIAGONAL COMPRESSION , 2019 .

[11]  Serena Cattari,et al.  Seismic behaviour of ordinary masonry buildings during the 2016 central Italy earthquakes , 2019, Bulletin of Earthquake Engineering.

[12]  Nassif Nazeer Thaickavil,et al.  Behaviour and strength assessment of masonry prisms , 2018, Case Studies in Construction Materials.

[13]  J. Aubert,et al.  Thermal, hydric and mechanical behaviours of adobes stabilized with cement , 2018 .

[14]  Paulo B. Lourenço,et al.  Experimental seismic performance assessment of asymmetric masonry buildings , 2018 .

[15]  Qudeer Hussain,et al.  Mechanical Properties of Local Cement-Clay Interlocking Bricks in Central Part of Thailand , 2018 .

[16]  D. Das,et al.  In-plane strength of masonry panel strengthened with geosynthetic , 2017 .

[17]  Pankaj Munjal,et al.  Bond strength and compressive stress-strain characteristics of brick masonry , 2017 .

[18]  Radhikesh P. Nanda,et al.  Seismic Retrofitting of Unreinforced Brick Masonry Panels with Glass Fibre Reinforced Polymers , 2017 .

[19]  Maria Rosa Valluzzi,et al.  Compression and Sonic Tests to Assess Effectiveness of Grout Injection on Three-Leaf Stone Masonry Walls , 2014 .

[20]  Gang Li,et al.  Strength and stress–strain characteristics of traditional adobe block and masonry , 2013 .

[21]  T. Ornthammarath.  Damage due to 24 March 2011 M6.8 Tarlay Earthquake in Northern Thailand , 2011 .

[22]  Vorrada Loryuenyong,et al.  Effects of recycled glass substitution on the physical and mechanical properties of clay bricks. , 2009, Waste management.

[23]  M. Johari,et al.  A Review: Durability of Fired Clay Brick Masonry Wall due to Salt Attack , 2009 .

[24]  Durgesh C. Rai,et al.  Stress-Strain Characteristics of Clay Brick Masonry under Uniaxial Compression , 2007 .

[25]  A. Gupta,et al.  Characteristics of soil-cement blocks using highly sandy soils , 2005 .

[26]  B. V. Venkatarama Reddy,et al.  Steam-cured stabilised soil blocks for masonry construction , 1998 .

[27]  P. Walker.  Strength, durability and shrinkage characteristics of cement stabilised soil blocks , 1995 .

[28]  Daniel P. Abrams,et al.  Mechanics of Masonry in Compression , 1985 .