Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions

[1]  Nancy J. Dudney,et al.  Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries , 2013 .

[2]  Jens Tübke,et al.  Development and costs calculation of lithium–sulfur cells with high sulfur load and binder free electrodes , 2013 .

[3]  Shengbo Zhang,et al.  Improved Cyclability of Liquid Electrolyte Lithium/Sulfur Batteries by Optimizing Electrolyte/Sulfur Ratio , 2012 .

[4]  Shizhao Xiong,et al.  Properties of surface film on lithium anode with LiNO3 as lithium salt in electrolyte solution for lithium–sulfur batteries , 2012 .

[5]  Arumugam Manthiram,et al.  Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer , 2012, Nature Communications.

[6]  Lin Gu,et al.  Smaller sulfur molecules promise better lithium-sulfur batteries. , 2012, Journal of the American Chemical Society.

[7]  Arumugam Manthiram,et al.  Self-weaving sulfur-carbon composite cathodes for high rate lithium-sulfur batteries. , 2012, Physical chemistry chemical physics : PCCP.

[8]  I. Honma,et al.  Quasi-Solid-State Lithium-Sulfur Battery Using Room Temperature Ionic Liquid-Li-salt-Fumed Silica Nanoparticle Composites as Electrolytes , 2012 .

[9]  E. Plichta,et al.  Oxygen Reduction Reactions in Ionic Liquids and the Formulation of a General ORR Mechanism for Li–Air Batteries , 2012 .

[10]  Linda F. Nazar,et al.  Understanding the Nature of Absorption/Adsorption in Nanoporous Polysulfide Sorbents for the Li–S Battery , 2012 .

[11]  Arumugam Manthiram,et al.  A new approach to improve cycle performance of rechargeable lithium-sulfur batteries by inserting a free-standing MWCNT interlayer. , 2012, Chemical communications.

[12]  A. Manthiram,et al.  Enhanced Cyclability of Lithium–Sulfur Batteries by a Polymer Acid-Doped Polypyrrole Mixed Ionic–Electronic Conductor , 2012 .

[13]  Shengbo Zhang,et al.  A proof-of-concept lithium/sulfur liquid battery with exceptionally high capacity density , 2012 .

[14]  A. Manthiram,et al.  Core-shell structured sulfur-polypyrrole composite cathodes for lithium-sulfur batteries , 2012 .

[15]  Shengdi Zhang.  Role of LiNO3 in rechargeable lithium/sulfur battery , 2012 .

[16]  Hui Zhan,et al.  Investigation of S/C composite synthesized by solvent exchange method , 2012 .

[17]  Petr Novák,et al.  Influence of different electrode compositions and binder materials on the performance of lithium–sulfur batteries , 2012 .

[18]  Xiangyun Song,et al.  Nano-carbon/sulfur composite cathode materials with carbon nanofiber as electrical conductor for advanced secondary lithium/sulfur cells , 2012 .

[19]  Jae-Hun Kim,et al.  One-step synthesis of a sulfur-impregnated graphene cathode for lithium-sulfur batteries. , 2012, Physical chemistry chemical physics : PCCP.

[20]  Sébastien Patoux,et al.  Lithium/sulfur cell discharge mechanism: an original approach for intermediate species identification. , 2012, Analytical chemistry.

[21]  E. Cairns,et al.  Porous carbon-sulfur composite cathode for lithium/sulfur cells , 2012 .

[22]  Xiangyun Song,et al.  Carbon nanofiber–sulfur composite cathode materials with different binders for secondary Li/S cells , 2012 .

[23]  Guangbin Ji,et al.  High-rate lithium-sulfur batteries promoted by reduced graphene oxide coating. , 2012, Chemical communications.

[24]  Bei Wang,et al.  Enhance electrochemical performance of lithium sulfur battery through a solution-based processing technique , 2012 .

[25]  Kyoung-Hee Shin,et al.  Synthesis and electrochemical properties of a sulfur-multi walled carbon nanotubes composite as a cathode material for lithium sulfur batteries , 2012 .

[26]  Jun Liu,et al.  A Soft Approach to Encapsulate Sulfur: Polyaniline Nanotubes for Lithium‐Sulfur Batteries with Long Cycle Life , 2012, Advanced materials.

[27]  Bruno Scrosati,et al.  A contribution to the progress of high energy batteries: A metal-free, lithium-ion, silicon-sulfur battery , 2012 .

[28]  Jeffrey Read,et al.  A new direction for the performance improvement of rechargeable lithium/sulfur batteries , 2012 .

[29]  Sébastien Patoux,et al.  New insights into the limiting parameters of the Li/S rechargeable cell , 2012 .

[30]  Shizhao Xiong,et al.  Insights into Li-S Battery Cathode Capacity Fading Mechanisms: Irreversible Oxidation of Active Mass during Cycling , 2012 .

[31]  Shengbo Zhang.  Binder Based on Polyelectrolyte for High Capacity Density Lithium/Sulfur Battery , 2012 .

[32]  Hai-Bo Lu,et al.  Water-Soluble Polyacrylic Acid as a Binder for Sulfur Cathode in Lithium-Sulfur Battery , 2012 .

[33]  Shengbo Zhang,et al.  Effect of Discharge Cutoff Voltage on Reversibility of Lithium/Sulfur Batteries with LiNO3-Contained Electrolyte , 2012 .

[34]  Doron Aurbach,et al.  Rechargeable lithiated silicon–sulfur (SLS) battery prototypes , 2012 .

[35]  Doron Aurbach,et al.  Sulfur‐Impregnated Activated Carbon Fiber Cloth as a Binder‐Free Cathode for Rechargeable Li‐S Batteries , 2011, Advanced materials.

[36]  Z. Lan,et al.  Preparation and electrochemical properties of polysulfide polypyrrole , 2011 .

[37]  Jie Gao,et al.  Effects of Liquid Electrolytes on the Charge–Discharge Performance of Rechargeable Lithium/Sulfur Batteries: Electrochemical and in-Situ X-ray Absorption Spectroscopic Studies , 2011 .

[38]  Xiao Xing Liang,et al.  Improved cycling performances of lithium sulfur batteries with LiNO 3-modified electrolyte , 2011 .

[39]  Jun Liu,et al.  Optimization of mesoporous carbon structures for lithium–sulfur battery applications , 2011 .

[40]  Chunsheng Wang,et al.  Sulfur-impregnated disordered carbon nanotubes cathode for lithium-sulfur batteries. , 2011, Nano letters.

[41]  Guangyuan Zheng,et al.  Hollow carbon nanofiber-encapsulated sulfur cathodes for high specific capacity rechargeable lithium batteries. , 2011, Nano letters.

[42]  Z. Wen,et al.  A nano-structured and highly ordered polypyrrole-sulfur cathode for lithiumsulfur batteries , 2011 .

[43]  Lixia Yuan,et al.  Enhanced Cyclability for Sulfur Cathode Achieved by a Water-Soluble Binder , 2011 .

[44]  Sheng Li,et al.  Layer Structured Sulfur/Expanded Graphite Composite as Cathode for Lithium Battery , 2011 .

[45]  Yi Cui,et al.  Prelithiated silicon nanowires as an anode for lithium ion batteries. , 2011, ACS nano.

[46]  H. Dai,et al.  Graphene-wrapped sulfur particles as a rechargeable lithium-sulfur battery cathode material with high capacity and cycling stability. , 2011, Nano letters.

[47]  L. Archer,et al.  Porous hollow carbon@sulfur composites for high-power lithium-sulfur batteries. , 2011, Angewandte Chemie.

[48]  Xiulei Ji,et al.  Stabilizing lithium-sulphur cathodes using polysulphide reservoirs. , 2011, Nature Communications.

[49]  Zhenguo Yang,et al.  Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries. , 2011, Physical chemistry chemical physics : PCCP.

[50]  Jun Jin,et al.  Highly dispersed sulfur in ordered mesoporous carbon sphere as a composite cathode for rechargeable , 2011 .

[51]  Li Li,et al.  Sulfur/Polythiophene with a Core/Shell Structure: Synthesis and Electrochemical Properties of the Cathode for Rechargeable Lithium Batteries , 2011 .

[52]  Shuru Chen,et al.  Ordered mesoporous carbon/sulfur nanocomposite of high performances as cathode for lithium–sulfur battery , 2011 .

[53]  Bruno Scrosati,et al.  Rechargeable lithium sulfide electrode for a polymer tin/sulfur lithium-ion battery , 2011 .

[54]  Shengbo Zhang,et al.  The effect of quaternary ammonium on discharge characteristic of a non-aqueous electrolyte Li/O2 battery , 2011 .

[55]  Bruno Scrosati,et al.  Moving to a Solid‐State Configuration: A Valid Approach to Making Lithium‐Sulfur Batteries Viable for Practical Applications , 2010, Advanced materials.

[56]  Z. Qian,et al.  The preparation of nano-sulfur/MWCNTs and its electrochemical performance , 2010 .

[57]  M. Zheng,et al.  Preparation and performance of a core–shell carbon/sulfur material for lithium/sulfur battery , 2010 .

[58]  Xueping Gao,et al.  Enhancement of long stability of sulfur cathode by encapsulating sulfur into micropores of carbon spheres , 2010 .

[59]  Shichao Zhang,et al.  A Novel cathode material based on polyaniline used for lithium/sulfur secondary battery , 2010 .

[60]  Jason Xu,et al.  High Energy Rechargeable Li-S Cells for EV Application: Status, Remaining Problems and Solutions , 2010 .

[61]  Feng Wu,et al.  Sulfur–Polythiophene Composite Cathode Materials for Rechargeable Lithium Batteries , 2010 .

[62]  Bruno Scrosati,et al.  A high-performance polymer tin sulfur lithium ion battery. , 2010, Angewandte Chemie.

[63]  Yi Cui,et al.  New nanostructured Li2S/silicon rechargeable battery with high specific energy. , 2010, Nano letters.

[64]  Doron Aurbach,et al.  On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries , 2009 .

[65]  Yaqin Huang,et al.  Structural change of the porous sulfur cathode using gelatin as a binder during discharge and charge , 2009 .

[66]  L. Nazar,et al.  A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries. , 2009, Nature materials.

[67]  Zhen Zhou,et al.  Preparation and electrochemical properties of sulfur–acetylene black composites as cathode materials , 2009 .

[68]  Zhen Zhou,et al.  Synthesis and Electrochemical Performance of Sulfur/Highly Porous Carbon Composites , 2009 .

[69]  Jing Sun,et al.  Application of gelatin as a binder for the sulfur cathode in lithium–sulfur batteries , 2008 .

[70]  Jou-Hyeon Ahn,et al.  Rechargeable lithium/sulfur battery with liquid electrolytes containing toluene as additive , 2008 .

[71]  Preparation and electrochemical characterization of the porous sulfur cathode using a gelatin binder , 2008 .

[72]  Elton J. Cairns,et al.  N-Methyl-(n-butyl)pyrrolidinium bis(trifluoromethanesulfonyl)imide-LiTFSI–poly(ethylene glycol) dimethyl ether mixture as a Li/S cell electrolyte , 2008 .

[73]  Jou-Hyeon Ahn,et al.  Improvement of cycle property of sulfur electrode for lithium/sulfur battery , 2008 .

[74]  K. W. Kim,et al.  Electrochemical properties of sulfur electrode containing nano Al2O3 for lithium/sulfur cell , 2007 .

[75]  O. Lev,et al.  Equilibrium distribution of polysulfide ions in aqueous solutions at different temperatures by rapid single phase derivatization. , 2007, Environmental science & technology.

[76]  Soo-Jin Park,et al.  Effect of imidazolium cation on cycle life characteristics of secondary lithium–sulfur cells using liquid electrolytes , 2007 .

[77]  Shengbo Zhang.  A review on electrolyte additives for lithium-ion batteries , 2006 .

[78]  Wenbin Zheng,et al.  Novel nanosized adsorbing sulfur composite cathode materials for the advanced secondary lithium batteries , 2006 .

[79]  Yong-Mook Kang,et al.  Effects of Nanosized Adsorbing Material on Electrochemical Properties of Sulfur Cathodes for Li/S Secondary Batteries , 2004 .

[80]  W. Price,et al.  Ion transport properties of six lithium salts dissolved in γ-butyrolactone studied by self-diffusion and ionic conductivity measurements , 2004 .

[81]  Jung-Ki Park,et al.  Electrochemical performance of lithium/sulfur batteries with protected Li anodes , 2003 .

[82]  B. Eckert,et al.  Solid Sulfur Allotropes , 2003 .

[83]  Hee‐Tak Kim,et al.  Binary electrolyte based on tetra(ethylene glycol) dimethyl ether and 1,3-dioxolane for lithium-sulfur battery , 2002 .

[84]  E. Peled,et al.  Lithium‐Sulfur Battery: Evaluation of Dioxolane‐Based Electrolytes , 1989 .

[85]  Emanuel Peled,et al.  Lithium Sulfur Battery Oxidation/Reduction Mechanisms of Polysulfides in THF Solutions , 1988 .

[86]  N. N. Greenwood,et al.  Chemistry of the elements , 1984 .

[87]  E. Theilig.  A primer on sulfur for the planetary geologist , 1982 .

[88]  K. M. Abraham,et al.  A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte , 1979 .

[89]  R. D. Rauh,et al.  Formation of lithium polysulfides in aprotic media , 1977 .

[90]  R. Fanelli,et al.  The Viscosity of Sulfur1 , 1943 .