Gas Turbine Performance Optimization Using Compressor Online Water Washing Technique

The ability to predict the behaviour of a gas turbine engine and optimize its performance is critical in eco-nomic, thermal and condition monitoring studies. Having identified fouling as one of the major sources of compressor and therefore gas turbine deterioration, a computer-based engine model was developed to optimize the performance of gas turbines. The paper thus presents an analysis of compressor hand cleaning, on and offline compressor washing to actualize the technique using a computer program in Visual Basic programming language with data collected over a period of fifteen weeks for 2 gas turbine plants GT1 and GT2. The results of the data collected, when collated, shows that after washing, the overall operational efficiency changed from 39.2% to 46.25%. To optimize the performance of gas turbine engines, it is therefore recommended that operators should perform a combination of compressor hand cleaning, offline and online washing simultaneously.

[1]  David Gordon Wilson,et al.  The design of high-efficiency turbomachinery and gas turbines , 1984 .

[2]  Ernst Schneider,et al.  Analysis of Compressor On-Line Washing to Optimize Gas Turbine Power Plant Performance , 2010 .

[3]  A. K Raja,et al.  Power Plant Engineering , 2019 .

[4]  Peter C. Frith.  The Effect of Compressor Rotor Tip Crops on Turboshaft Engine Performance , 1992 .

[5]  Cyrus B. Meher-Homji,et al.  The Fouling of Axial Flow Compressors: Causes, Effects, Susceptibility and Sensitivity , 2009 .

[6]  Ezenwa A. Ogbonnaya,et al.  Computer-Aided Solution to the Vibrational Effect of Instabilities in Gas Turbine Compressors , 2010 .

[7]  Black.  Power Plant Engineering , 2005 .

[8]  Ezenwa A. Ogbonnaya,et al.  Use of Multiple Variable Mathematical Method for Effective Condition Monitoring of Gas Turbines , 2010 .

[9]  Jean-Pierre Stalder.  GAS TURBINE COMPRESSOR WASHING STATE OF THE ART-FIELD EXPERIENCES , 2001 .

[10]  R. J. Kind,et al.  Measurements and Prediction of the Effects of Surface Roughness on Profile Losses and Deviation in a Turbine Cascade , 1996 .

[11]  Ray Beebe.  Condition Monitoring by Performance Analysis to Optimise Time for Overhaul of Centrifugal Pumps , 1998 .

[12]  T. D. Eastop,et al.  Applied thermodynamics for engineering technologies. 4th edition , 1986 .

[13]  Francisco Gonzalez,et al.  A study of on-line and off-line turbine washing to optimize the operation of a gas turbine , 2005 .

[14]  R. E. Dundas.  The Use of Performance-Monitoring to Prevent Compressor and Turbine Blade Failures , 1982 .

[15]  Klaus Brun,et al.  Degradation in Gas Turbine Systems , 2001 .

[16]  R. J. Boyle.  Prediction of Surface Roughness and Incidence Effects on Turbine Performance , 1993 .

[17]  Klaus Brun,et al.  Aerodynamic Instability and Life-Limiting Effects of Inlet and Interstage Water Injection Into Gas Turbines , 2006 .

[18]  Ezenwa A. Ogbonnaya.  Diagnozing and Prognozing Gas Turbine Rotor Shaft Faults Using “The MICE” , 2009 .

[19]  Ihor S. Diakunchak.  Performance Deterioration in Industrial Gas Turbines , 1991 .

[20]  Michele Pinelli,et al.  Influence of Blade Deterioration on Compressor and Turbine Performance , 2010 .

[21]  T. D. Eastop,et al.  Applied Thermodynamics for Engineering Technologists , 1978 .

[22]  Frank E. Marble,et al.  Endwall Blockage in Axial Compressors , 1998 .