Design of Bulk metallic glasses with high glass forming ability and enhancement of plasticity in metallic glass matrix composites: A review

[1]  W. Kim,et al.  The effect of In addition on the glass-forming ability in Cu-Ti-Zr-Ni-Si metallic glasses , 2004 .

[2]  D. Bae,et al.  Bulk glass formation in the Ni–Zr–Ti–Nb–Si–Sn alloy system , 2004 .

[3]  W. Kim,et al.  Bulk Glass Formation in Mg-Cu-Ag-Y-Gd Alloy , 2004 .

[4]  Eun Sug Park,et al.  Formation of Ca–Mg–Zn bulk glassy alloy by casting into cone-shaped copper mold , 2004 .

[5]  S. Yi,et al.  Amorphous phase formation in a Ni−Zr−Al−Y alloy system , 2004 .

[6]  D. Bae,et al.  Effects of Sn addition on the glass forming ability and crystallization behavior in Ni–Zr–Ti–Si alloys , 2004 .

[7]  Yu‐Chan Kim,et al.  Role of nanometer-scale quasicrystals in improving the mechanical behavior of Ti-based bulk metallic glasses , 2003 .

[8]  Do Hyang Kim,et al.  Fabrication and Mechanical Properties of Mg65Cu15Ag5Pd5Gd10 Bulk Metallic Glass , 2003 .

[9]  D. Bae,et al.  Ni-Based Refractory Bulk Amorphous Alloys with High Thermal Stability , 2003 .

[10]  Yu‐Chan Kim,et al.  Precipitation of Stable Icosahedral Phase in Ti-Based Amorphous Alloys , 2003 .

[11]  Myung-Hyun Lee,et al.  Plasticity in Ni59Zr20Ti16Si2Sn3 metallic glass matrix composites containing brass fibers synthesized by warm extrusion of powders , 2003 .

[12]  K. Nakai,et al.  Effects of Cr on the early crystallization stages of Nd4.5Fe77-xCrxB18.5 amorphous ribbons , 2003 .

[13]  D. Kim,et al.  Fabrication of ternary Mg–Cu–Gd bulk metallic glass with high glass-forming ability under air atmosphere , 2003 .

[14]  J. Eckert,et al.  Microstructure and mechanical properties of the Zr66.4Cu10.5Ni8.7Al8Ta6.4 metallic glass-forming alloy , 2003 .

[15]  Wei Zhang,et al.  Formation and mechanical properties of Ni-based Ni–Nb–Ti–Hf bulk glassy alloys , 2003 .

[16]  W. Johnson,et al.  Ni-based bulk metallic glass formation in the Ni–Nb–Sn and Ni–Nb–Sn–X (X=B,Fe,Cu) alloy systems , 2003 .

[17]  Myung-Hyun Lee,et al.  Synthesis of Ni-based bulk amorphous alloys by warm extrusion of amorphous powders , 2003 .

[18]  Ludwig Schultz,et al.  Novel Ti-base nanostructure–dendrite composite with enhanced plasticity , 2003, Nature materials.

[19]  J. Eckert,et al.  Enhanced plasticity in a Ti-based bulk metallic glass-forming alloy by in situ formation of a composite microstructure , 2002 .

[20]  Wei Zhang,et al.  Formation, Thermal Stability and Mechanical Properties of Cu-Zr-Al Bulk Glassy Alloys , 2002 .

[21]  K. Amiya,et al.  Formation and Thermal Stability of Ca-Mg-Ag-Cu Bulk Glassy Alloys , 2002 .

[22]  Wei Zhang,et al.  Effects of Ti on the Thermal Stability and Glass-Forming Ability of Ni-Nb Glassy Alloy , 2002 .

[23]  A. Inoue,et al.  Nanocrystallization of Cu–(Zr or Hf)–Ti metallic glasses , 2002 .

[24]  Wei Zhang,et al.  Thermal Stability and Mechanical Strength of Bulk Glassy Ni-Nb-Ti-Zr Alloys , 2002 .

[25]  T. Hufnagel,et al.  Metallic glass matrix composite with precipitated ductile reinforcement , 2002 .

[26]  H. Men,et al.  Bulk metallic glass formation in the Mg-Cu-Zn-Y system , 2002 .

[27]  Do Hyang Kim,et al.  Glass forming ability and crystallization behavior in amorphous Ti50Cu32-xNi15Sn3Bex (x = 0,1, 3, 7) alloys , 2002 .

[28]  D. Bae,et al.  Mechanical behavior of a bulk Cu-Ti-Zr-Ni-Si-Sn metallic glass forming nano-crystal aggregate bands during deformation in the supercooled liquid region , 2002 .

[29]  A. Inoue,et al.  New Bulk Glassy Ni-Based Alloys with High Strength of 3000 MPa , 2002 .

[30]  A. Inoue,et al.  Synthesis of Fe–Cr–Mo–C–B–P bulk metallic glasses with high corrosion resistance , 2002 .

[31]  D. Kim,et al.  The effect of Sn addition on the glass-forming ability of Cu–Ti–Zr–Ni–Si metallic glass alloys , 2002 .

[32]  K. Amiya,et al.  Formation, Thermal Stability and Mechanical Properties of Ca-Based Bulk Glassy Alloys , 2002 .

[33]  M. Kramer,et al.  Synthesis of Cu_47Ti_34Zr_11Ni_8 Bulk Metallic Glass by Warm Extrusion of Gas Atomized Powders , 2001 .

[34]  W. Johnson,et al.  Processing of carbon-fiber-reinforced Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 bulk metallic glass composites , 2001 .

[35]  Akihisa Inoue,et al.  High-strength Cu-based bulk glassy alloys in Cu-Zr-Ti and Cu-Hf-Ti ternary systems , 2001 .

[36]  J. K. Lee,et al.  Precipitation of the icosahedral phase in amorphous Zr65Cu17.5−xAl7.5Ni10Agx (x=0,2.5, 5, 7.5 and 10) alloys , 2001 .

[37]  W. Johnson,et al.  Mechanical properties of Zr56.2Ti13.8Nb5.0Cu6.9Ni5.6Be12.5 ductile phase reinforced bulk metallic glass composite , 2001 .

[38]  S. Yi,et al.  Nano-structured bulk alloys of pig iron fabricated by warm processing , 2001 .

[39]  S. J. Kim,et al.  Nanocrystallization and high tensile strength of amorphous Zr-Al-Ni-Cu-Ag alloys , 2001 .

[40]  K. Amiya,et al.  Preparation of Bulk Glassy Mg65Y10Cu15Ag5Pd5 Alloy of 12 mm in Diameter by Water Quenching , 2001 .

[41]  J. Eckert,et al.  Nanostructured materials in multicomponent alloy systems , 2001 .

[42]  Dockyu Kim,et al.  The effect of Ag addition on the glass-forming ability of Mg–Cu–Y metallic glass alloys , 2001 .

[43]  S. Yi,et al.  Glass Forming Ability and Crystallization Behaviors of the Ti-Cu-Ni-(Sn) Alloys with Large Supercooled Liquid Region , 2001 .

[44]  A. Inoue,et al.  Enhancement of Strength and Ductility in Zr-Based Bulk Amorphous Alloys by Precipitation of Quasicrystalline Phase , 2000 .

[45]  K. Amiya,et al.  Thermal Stability and Mechanical Properties of Mg–Y–Cu–M (M = Ag, Pd) Bulk Amorphous Alloys , 2000 .

[46]  M. Chen,et al.  RETRACTED – Formation and properties of Zr-based bulk quasicrystalline alloys with high strength and good ductility , 2000 .

[47]  D. Kim,et al.  Formation of icosahedral phase from amorphous Zr65Al7.5Cu12.5Ni10Ag5 alloys , 2000 .

[48]  Do Hyang Kim,et al.  Fabrication of Bulk Mg–Cu–Ag–Y Glassy Alloy by Squeeze Casting , 2000 .

[49]  Teahoon Park,et al.  Development of new Ni-based amorphous alloys containing no metalloid that have large undercooled liquid regions , 2000 .

[50]  Hays,et al.  Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions , 2000, Physical review letters.

[51]  C. Fan,et al.  High-strength Zr-based bulk amorphous alloys containing nanocrystalline and nanoquasicrystalline particles , 2000 .

[52]  A. Inoue.  Stabilization of metallic supercooled liquid and bulk amorphous alloys , 2000 .

[53]  A. Inoue,et al.  Bulk Amorphous Ni75−xNb5MxP20−yBy (M=Cr, Mo) Alloys with Large Supercooling and High Strength , 1999 .

[54]  W. Johnson,et al.  Synthesis and characterization of particulate reinforced Zr57Nb5Al10Cu15.4Ni12.6 bulk metallic glass composites , 1999 .

[55]  A. Inoue,et al.  Preparation of Ti–Cu–Ni–Si–B Amorphous Alloys with a Large Supercooled Liquid Region , 1999 .

[56]  J. Eckert,et al.  Deformation mechanism of amorphous and partially crystallized alloys , 1999 .

[57]  W. Johnson,et al.  Mechanical properties of tungsten and steel fiber reinforced Zr41.25Ti13.75Cu12.5Ni10Be22.5 metallic glass matrix composites , 1998 .

[58]  A. Inoue,et al.  Thermal and mechanical properties of Ti-Ni-Cu-Sn amorphous alloys with a wide supercooled liquid region before crystallization , 1998 .

[59]  W. Johnson,et al.  THE EFFECT OF SILICON ON THE GLASS FORMING ABILITY OF THE CU47TI34ZR11NI8 BULK METALLIC GLASS FORMING ALLOY DURING PROCESSING OF COMPOSITES , 1998 .

[60]  A. Yavari,et al.  High packing density of Zr- and Pd-based bulk amorphous alloys , 1998 .

[61]  S. Roos,et al.  Formation of quasicrystals in bulk glass forming Zr–Cu–Ni–Al alloys , 1996 .

[62]  A. Inoue,et al.  Preparation of Bulk Glassy Pd 40 Ni 10 Cu 30 P 20 Alloy of 40 mm in Diameter by Water Quenching , 1996 .

[63]  A. Inoue,et al.  Fabrication of bulk glassy Zr55Al10Ni5Cu30 alloy of 30 mm in diameter by a suction casting method , 1996 .

[64]  W. Johnson,et al.  Formation of Ti–Zr–Cu–Ni bulk metallic glasses , 1995 .

[65]  A. Inoue,et al.  Mg–Cu–Y Bulk Amorphous Alloys with High Tensile Strength Produced by a High-Pressure Die Casting Method , 1992 .

[66]  K. Kelton,et al.  Kinetics of the amorphous to icosahedral phase transformation in AlCuV alloys , 1991 .

[67]  A. Inoue,et al.  Mg–Cu–Y Amorphous Alloys with High Mechanical Strengths Produced by a Metallic Mold Casting Method , 1991 .

[68]  V. Molokanov,et al.  Quasicrystals and amorphous alloys in TiZrNi system: Glassforming ability, structure and properties , 1990 .

[69]  A. Inoue,et al.  High Mechanical Strengths of Mg–Ni–Y and Mg–Cu–Y Amorphous Alloys with Significant Supercooled Liquid Region , 1990 .

[70]  A. Inoue,et al.  Kinetics of the amorphous to icosahedral structure transition in Al-Cu-V and Al-Mn-Si alloys , 1989 .

[71]  Shen,et al.  Crystallization of icosahedral phase from glassy Pd-U-Si alloys. , 1986, Physical review. B, Condensed matter.

[72]  Poon,et al.  Glassy to icosahedral phase transformation in Pd-U-Si alloys. , 1985, Physical review letters.

[73]  R. P. Messmer.  Local electronic structure of amorphous metal alloys using cluster models. Evidence for specific metalloid-metal interactions , 1981 .

[74]  T. Kémény,et al.  MAGNETIC-PROPERTIES OF AMORPHOUS TRANSITION-METAL ALLOYS , 1980 .

[75]  J. Walter.  Chemical ordering in some amorphous alloys , 1979 .

[76]  D. Boudreaux,et al.  Short-range order in Fe-B metallic glass alloys , 1979 .

[77]  P. Duwez,et al.  Non-crystalline Structure in Solidified Gold–Silicon Alloys , 1960, Nature.