A review of the behaviour and analysis of bolted connections and joints in pultruded fibre reinforced polymers

Abstract This paper presents a literature review of the state-of-the-art experimental and analytical methodologies adopted in the construction industry for the design of mechanically fastened connections and joints in pultruded fibre reinforced polymer framed structures. Results and conclusions obtained from the published literature relating to the effects of critical parameters, which include geometry, material properties, configuration, connecting components, fasteners, lateral restraint, etc. on the mechanical behaviour and failure modes are discussed in the light of addressing gaps in knowledge that need resolving to prepare design guidance that is reliable and robust. Further research required to improve the design of composite mechanically fastened joints is identified as a result of this review.

[1]  J. Clarke.  Structural design of polymer composites : EUROCOMP design code and handbook , 1996 .

[2]  Sami H. Rizkalla,et al.  Finite element analysis of bolted connections for PFRP composites , 1996 .

[3]  Stephen W. Tsai,et al.  A General Theory of Strength for Anisotropic Materials , 1971 .

[4]  Geoffrey Turvey,et al.  An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate , 2012 .

[5]  I. H. Marshall,et al.  Observations on bolted connections in composite structures , 1989 .

[6]  I. D. Parsons,et al.  An experimental study of the behavior of connections for pultruded GFRP I-beams and rectangular tubes , 1998 .

[7]  Steven John Smith,et al.  An Investigation of Beam-to-Column Connections for Composite Structural Systems , 1997 .

[8]  Michael W. Hyer,et al.  Contact stresses in pin-loaded orthotropic plates , 1985 .

[9]  Wai-Fah Chen.  Steel beam-to-column building connections , 1988 .

[10]  Hakan Kilic,et al.  Elastic-degrading analysis of pultruded composite structures , 2003 .

[11]  Geoffrey Turvey,et al.  Moment – rotation tests on bolted end connections in pultruded GRP beams – tests with stainless steel cleata and an assessment of their performance relative to GRP cleats. , 2000 .

[12]  Hakan Kilic,et al.  Progressive damage and nonlinear analysis of pultruded composite structures , 2003 .

[13]  Geoffrey Turvey.  Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate , 2012 .

[14]  Guy Gendron,et al.  Stress and failure analysis of mechanically fastened joints in composite laminates , 2000 .

[15]  I. D. Parsons,et al.  Experimental Comparisons of Connections for GFRP Pultruded Frames , 1999 .

[16]  C. Cooper,et al.  Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics. , 1996 .

[17]  G. Turvey,et al.  An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design , 2008 .

[18]  J. T. Mottram,et al.  State-of-the-art review on the design of beam-to-column connections for pultruded frames , 1996 .

[19]  James M. LaFave,et al.  Finite element study of composite cuff connections for pultruded box sections , 2005 .

[20]  Geoffrey Turvey,et al.  Physical test data for the appraisal of design procedures for bolted joints in pultruded FRP structural shapes and systems , 2003 .

[21]  Sami H. Rizkalla,et al.  Bolted Connections for Fiber-Reinforced Composite Structural Members: Analytical Model and Design Recommendations , 1995 .

[22]  L. Hollaway,et al.  The experimental behaviour of bolted joints in pultruded glass/ polyester material. Part 2: Two-bolt joints , 1993 .

[23]  C. Cooper,et al.  Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material , 1995 .

[24]  A. Johnson,et al.  Structural Design of Polymer Composites , 1993 .

[25]  Jawed Qureshi,et al.  Response of Beam-To-Column Web Cleated Joints For FRP Pultruded Members , 2014 .

[26]  D. E. Cooper,et al.  The Effects of Pin Elasticity, Clearance, and Friction on the Stresses in a Pin-Loaded Orthotropic Plate , 1987 .

[27]  Sami H. Rizkalla,et al.  MULTIBOLTED JOINTS FOR GFRP STRUCTURAL MEMBERS , 1997 .

[28]  Sami H. Rizkalla,et al.  RATIONAL MODEL FOR MULTIBOLTED CONNECTIONS FOR GFRP MEMBERS , 1997 .

[29]  L. C. Bank,et al.  Beam-To-Column Connections for Pultruded FRP Structures , 1990 .

[30]  S. Lee,et al.  EXPERIMENTAL AND ANALYTICAL INVESTIGATIONS ON THE BOLTED JOINTS IN PULTRUDED FRP STRUCTURAL MEMBERS , 2009 .

[31]  L. Bank.  Composites for Construction: Structural Design with FRP Materials , 2006 .

[32]  M. Hinton.  Failure Criteria in Fibre-Reinforced-Polymer Composites: The World-Wide Failure Exercise , 2004 .

[33]  J. Toby Mottram,et al.  Design guidance for bolted connections in structures ofpultruded shapes: gaps in knowledge , 2009 .

[34]  Geoffrey Turvey,et al.  Review of tests on bolted joints between pultruded GRP profiles , 2004 .

[35]  J. Reddy.  Mechanics of laminated composite plates and shells : theory and analysis , 1996 .

[36]  David J. Evans,et al.  Experimental and Numerical Evaluation of Beam-To-Column Connections for Pultruded Structures , 1996 .

[37]  Ana M. Girão Coelho,et al.  Rotation capacity of partial strength steel joints with three-dimensional finite element approach , 2013 .

[38]  Michel Bruneau,et al.  CYCLIC TESTING OF PULTRUDED FIBER-REINFORCED PLASTIC BEAM-COLUMN RIGID CONNECTION , 1994 .

[39]  J. T. Mottram.  Friction and load transfer in bolted joints of pultruded fibre reinforced polymer section , 2004 .

[40]  Jawed Qureshi,et al.  Behaviour of pultruded beam-to-column joints using steel web cleats , 2013 .

[41]  Anke Schmid,et al.  Design Guide For Frp Composite Connections , 2016 .

[42]  Chanakya Arya,et al.  Eurocode 3: Design of steel structures , 2018, Design of Structural Elements.

[43]  Hakan Kilic,et al.  Nested nonlinear micromechanical and structural models for the analysis of thick-section composite materials and structures , 2007 .

[44]  Xinlin Qing,et al.  The Response of Composite Joints with Bolt-Clamping Loads, Part I: Model Development , 2002 .

[45]  M. A. Erki.  Bolted glass-fibre-reinforced plastic joints , 1995 .

[46]  Annette M. Harte,et al.  Finite element modelling of the semi-rigid behaviour of pultruded FRP connections , 2001 .

[47]  Zia Razzaq,et al.  Load and resistance factor design (LRFD) approach for bolted joints in pultruded composites , 1996 .

[48]  C. Cooper,et al.  Single bolt tension joint tests on pultruded GRP WF-section web and flange material. , 1995 .

[49]  Lawrence C. Bank,et al.  Design and Performance of Connections for Pultruded Frame Structures , 1994 .

[50]  Geoffrey Turvey.  Single-bolt tension joint tests on pultruded GRP plate — effects of tension direction relative to pultrusion direction , 1998 .

[51]  Luciano Feo,et al.  Stress analysis of multi-bolted joints for FRP pultruded composite structures , 2012 .

[52]  Ramamurthy Prabhakaran,et al.  AN EXPERIMENTAL INVESTIGATION OF LOAD-SHARING IN A MULTI-BOLT PULTRUDED COMPOSITE JOINT , 1998 .

[53]  Youjiang Wang.  Bearing Behavior of Joints in Pultruded Composites , 2002 .

[54]  Yang Zheng,et al.  FURTHER TESTS OF BEAM-TO-COLUMN CONNECTIONS FOR PULTRUDED FRAMES: FLANGE-CLEATED , 1999 .

[55]  I. D. Parsons,et al.  FINITE-ELEMENT AND SIMPLIFIED MODELS OF GFRP CONNECTIONS , 1999 .

[56]  Sami H. Rizkalla,et al.  Bolted Connections for Fiber-Reinforced Composite Structural Members: Experimental Program , 1995 .