A profitability assessment of European recycling processes treating printed circuit boards from waste electrical and electronic equipments

The management of waste electrical and electronic equipment (WEEE) is a well-stressed topic in the scientific literature. However, (i) the amount of cash flows potentially reachable, (ii) the future profitability trends and (iii) the reference mix of treated volumes guaranteeing a certain profitability level are not so clear, and related data are unrecoverable. The purpose of the paper is to fill in this gap by identifying the presence of profitability within the recovery process of waste printed circuit boards (WPCBs) embedded in WEEE. Net present value (NPV) and discounted payback time (DPBT) are used as reference indexes for the evaluation of investments. In addition, a sensitivity analysis of critical variables (plant saturation level, materials content, materials market prices, materials final purity level and WPCBs purchasing and opportunity costs) demonstrates the robustness of the results. Furthermore, the calculation of the national NPV for each of the twenty-eight European nations (in function of both WPCB mix and generated volumes) and the matching of predicted WPCB volumes (within the 2015–2030 period) and NPV quantify potential advantages. The break even point of gold allowing some profits from selected recovery plants goes from 73 to 93 ppm per WPCB ton, for mobile and field plants, respectively. Finally, the overall European values go from 2404 million € (mobile plant) to 4795 million € (field plant) in 2013, with Germany and United Kingdom as reference nations.

[1]  A. Nagurney,et al.  When and for whom would e-waste be a treasure trove? Insights from a network equilibrium model of e-waste flows , 2014 .

[2]  David Bogataj,et al.  The role of free economic zones in global supply chains--a case of reverselogistics , 2011 .

[3]  Mohammad Ali Gholami Sefidkouhi,et al.  Surface irrigation simulation models: a review , 2015 .

[4]  Chen Wang,et al.  An innovative approach to predict technology evolution for the desoldering of printed circuit boards: A perspective from China and America , 2016, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[5]  Takashi Kameya,et al.  A preliminary categorization of end-of-life electrical and electronic equipment as secondary metal resources. , 2011, Waste management.

[6]  X. Wang,et al.  Prioritizing material recovery for end-of-life printed circuit boards , 2011, Proceedings of the 2011 IEEE International Symposium on Sustainable Systems and Technology.

[7]  Angela C Kasper,et al.  Determination of the potential gold electrowinning from an ammoniacal thiosulphate solution applied to recycling of printed circuit board scraps , 2016, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[8]  S. Koh,et al.  Cross-tier ripple and indirect effects of directives WEEE and RoHS on greening a supply chain , 2012 .

[9]  Jia Li,et al.  Management strategies on the industrialization road of state-of- the-art technologies for e-waste recycling: the case study of electrostatic separation—a review , 2013, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[10]  Xianlai Zeng,et al.  A novel dismantling process of waste printed circuit boards using water-soluble ionic liquid. , 2013, Chemosphere.

[11]  V. S. Rotter,et al.  A system dynamics model for evaluating the alternative of type in construction and demolition waste recycling center – The case of Chongqing, China , 2011 .

[12]  S. Koh,et al.  Sustainable supply chain management and the transition towards a circular economy: Evidence and some applications $ , 2017 .

[13]  Giacomo Copani,et al.  DEMAT: sustainability assessment of new flexibility-oriented business models in the machine tools industry , 2015, Int. J. Comput. Integr. Manuf..

[14]  Ida De Michelis,et al.  Extraction of metals from automotive shredder residue: Preliminary results of different leaching systems , 2015 .

[15]  V Pérez-Belis,et al.  An in-depth literature review of the waste electrical and electronic equipment context: Trends and evolution , 2015, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[16]  Helge V. Larsen,et al.  Projection of end-of-life vehicles Development of a projection model and estimates of ELVs for 2005-2030 , 2008 .

[17]  João Patrício,et al.  Out with the old, out with the new--The effect of transitions in TVs and monitors technology on consumption and WEEE generation in Sweden 1996-2014. , 2015, Waste management.

[18]  Zarook Shareefdeen,et al.  Management and control of air emissions from electronic industries , 2013, Clean Technologies and Environmental Policy.

[19]  Jia Li,et al.  Environmental friendly automatic line for recovering metal from waste printed circuit boards. , 2010, Environmental science & technology.

[20]  Mohammad Valipour,et al.  Simulation of open- and closed-end border irrigation systems using SIRMOD , 2015 .

[21]  Yong Geng,et al.  An overview of e-waste management in China , 2015 .

[22]  Mengjun Chen,et al.  Lead during the leaching process of copper from waste printed circuit boards by five typical ionic liquid acids , 2015 .

[23]  Jinhui Li,et al.  An international comparative study of end-of-life vehicle (ELV) recycling systems , 2013, Journal of Material Cycles and Waste Management.

[24]  Vijay Kumar Garlapati,et al.  E-waste in India and developed countries: Management, recycling, business and biotechnological initiatives , 2016 .

[25]  Xianlai Zeng,et al.  Environmental risk assessment of CRT and PCB workshops in a mobile e-waste recycling plant , 2015, Environmental Science and Pollution Research.

[26]  Julian David Hunt,et al.  Brazilian recycling potential: Energy consumption and Green House Gases reduction , 2016 .

[27]  Federica Cucchiella,et al.  Recycling of WEEEs: An economic assessment of present and future e-waste streams , 2015 .

[28]  Dong Xiang,et al.  The Recycle Model of Printed Circuit Board and Its Economy Evaluation , 2007, Proceedings of the 2007 IEEE International Symposium on Electronics and the Environment.

[29]  Jia Li,et al.  Recycle technology for recovering resources and products from waste printed circuit boards. , 2007, Environmental science & technology.

[30]  Federica Cucchiella,et al.  Automotive printed circuit boards recycling: an economic analysis , 2016 .

[31]  Valeria Ibáñez-Forés,et al.  Potential reuse of small household waste electrical and electronic equipment: Methodology and case study. , 2016, Waste management.

[32]  Mohammad Valipour,et al.  Sprinkle and Trickle Irrigation System Design Using Tapered Pipes for Pressure Loss Adjusting , 2012 .

[33]  Bernd Kopacek,et al.  Yttrium recovery from primary and secondary sources: a review of main hydrometallurgical processes. , 2014, Waste management.

[34]  Federica Cucchiella,et al.  Implementation of a real option in a sustainable supply chain: an empirical study of alkaline battery recycling , 2014, Int. J. Syst. Sci..

[35]  Joseph Sarkis,et al.  Tactical supply chain planning under a carbon tax policy scheme: A case study , 2015 .

[36]  Lei Shi,et al.  Future paper based printed circuit boards for green electronics: fabrication and life cycle assessment† , 2014 .

[37]  Federica Cucchiella,et al.  Scrap automotive electronics: A mini-review of current management practices , 2016, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[38]  Idiano D’Adamo,et al.  Remanufacturing in industry: advices from the field , 2016 .

[39]  D. Battini,et al.  A sustainable EOQ model: Theoretical formulation and applications , 2014 .

[40]  N. Subramanian,et al.  Factors for implementing end-of-life computer recycling operations in reverse supply chains , 2012 .

[41]  J. Peeters,et al.  A multidimensional indicator set to assess the benefits of WEEE material recycling , 2014 .

[42]  Huseyin Selcuk Kilic,et al.  Reverse logistics system design for the waste of electrical and electronic equipment (WEEE) in Turkey , 2015 .

[43]  Brahmeshwar Mishra,et al.  Waste Printed Circuit Boards recycling: an extensive assessment of current status , 2015 .

[44]  Aliasghar Montazar,et al.  Sensitive analysis of optimized infiltration parameters in SWDC model , 2012 .

[45]  M. Valipour Optimization of neural networks for precipitation analysis in a humid region to detect drought and wet year alarms , 2016 .

[46]  Zeljko Kamberovic,et al.  HYDROMETALLURGICAL PROCESS FOR EXTRACTION OF METALS FROM ELECTRONIC WASTE-PART II: DEVELOPMENT OF THE PROCESSES FOR THE RECOVERY OF COPPER FROM PRINTED CIRCUIT BOARDS (PCB) , 2011 .

[47]  Suthipong Sthiannopkao,et al.  Handling e-waste in developed and developing countries: initiatives, practices, and consequences. , 2013, The Science of the total environment.

[48]  Ming Chen,et al.  Management status of end-of-life vehicles and development strategies of used automotive electronic control components recycling industry in China , 2012, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[49]  Gordon McKay,et al.  Waste printed circuit board recycling techniques and product utilization. , 2015, Journal of hazardous materials.

[50]  A. Terazono,et al.  Toxic metals in WEEE: characterization and substance flow analysis in waste treatment processes. , 2013, The Science of the total environment.

[51]  Azah Mohamed,et al.  A review on energy management system for fuel cell hybrid electric vehicle: Issues and challenges , 2015 .

[52]  Bernd Kopacek,et al.  Environmental impact assessment of hydrometallurgical processes for metal recovery from WEEE residues using a portable prototype plant. , 2013, Environmental science & technology.

[53]  Yves Ducq,et al.  Modified savings heuristics and genetic algorithm for bi-objective vehicle routing problem with forced backhauls , 2012, Expert Syst. Appl..

[54]  Federica Cucchiella,et al.  End-of-Life of used photovoltaic modules: A financial analysis , 2015 .

[55]  Daria Battini,et al.  Haulage sharing approach to achieve sustainability in material purchasing: New method and numerical applications , 2015 .

[56]  Zhenming Xu,et al.  Constructing environment-friendly return road of metals from e-waste: Combination of physical separation technologies , 2016 .

[57]  Yuquan Xu,et al.  Recent developments and perspective of the spent waste printed circuit boards , 2015, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[58]  Idiano D’Adamo,et al.  Current state of renewable energies performances in the European Union: A new reference framework , 2016 .

[59]  Lili Liu,et al.  Solving e-waste problem using an integrated mobile recycling plant , 2015 .

[60]  Jinhui Li,et al.  Measuring the recyclability of e-waste: an innovative method and its implications , 2016 .

[61]  Paolo Rosa,et al.  Life Cycle Assessment Tool in Product Development: Environmental Requirements in Decision Making Process , 2016 .

[62]  Xianlai Zeng,et al.  Solving spent lithium-ion battery problems in China: Opportunities and challenges , 2015 .

[63]  Fabrice Mathieux,et al.  Recycling of electronic displays: Analysis of pre-processing and potential ecodesign improvements , 2014 .

[64]  Valeria Ibáñez-Forés,et al.  Disassembly properties and material characterisation of household small waste electric and electronic equipment. , 2016, Waste management.