Mechanical behaviour of agro-residue reinforced poly(3-hydroxybutyrate-co-3-hydroxyvalerate), (PHBV) green composites: A comparison with traditional polypropylene composites

Abstract Novel green composites were successfully fabricated by incorporating agro-residues as corn straw (CS), soy stalk (SS) and wheat straw (WS) into the bacterial polyester, poly(3-hydroxybutyrate-co-3-hydroxyvalerate), PHBV, by melt mixing technique. Effects of these biomass fibers on mechanical, thermal, and dynamic mechanical properties of PHBV were investigated. A comparative study of biomass fiber-reinforced polypropylene composite systems was performed. The tensile and storage modulus of PHBV was improved by maximum 256% and 308% with the reinforcement of 30 wt.% agricultural byproducts to it. For equal amounts of (30%) biomass fibers, tensile and flexural modulii of PHBV composites showed much higher values than corresponding PP composites. Alkali treatment of wheat straw fibers enhanced strain @ break and impact strength of PHBV composites by ∼35%, hardly increasing strength and modulus compared to their untreated counterparts. DMA studies indicated better interfacial interaction of PHBV with the biomass fibers than PP. Scanning electron microscopy (SEM), used to study the morphology of composites, also revealed similar outcomes.

[1]  Rahul Bhardwaj,et al.  Renewable resource-based green composites from recycled cellulose fiber and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) bioplastic. , 2006, Biomacromolecules.

[2]  G. Madras,et al.  Effect of compatibilization on mechanical and thermal properties of polypropylene–soy flour composites , 2008 .

[3]  Guoqiang Chen,et al.  The application of polyhydroxyalkanoates as tissue engineering materials. , 2005, Biomaterials.

[4]  G. Bartenev,et al.  Relaxation transitions in polypropylene , 1984 .

[5]  Suhara Panthapulakkal,et al.  Agro-residue reinforced high-density polyethylene composites: Fiber characterization and analysis of composite properties , 2007 .

[6]  Mahbub Hasan,et al.  Physico-mechanical properties of chemically treated palm and coir fiber reinforced polypropylene composites. , 2009, Bioresource technology.

[7]  A. Mohanty,et al.  Wood fiber reinforced bacterial bioplastic composites: Fabrication and performance evaluation , 2007 .

[8]  M. Sain,et al.  Injection Molded Wheat Straw and Corn Stem Filled Polypropylene Composites , 2006 .

[9]  M. Ansell,et al.  Straw-reinforced polyester composites , 1983 .

[10]  P. Barham,et al.  Crystallization and morphology of a bacterial thermoplastic: poly-3-hydroxybutyrate , 1984 .

[11]  Y. Doi,et al.  Crystalline and thermal properties of bacterial copolyesters: poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) , 1989 .

[12]  M. Sain,et al.  Bioprocess preparation of wheat straw fibers and their characterization , 2006 .

[13]  Rafael Gavara,et al.  Comparative Performance and Barrier Properties of Biodegradable Thermoplastics and Nanobiocomposites versus PET for Food Packaging Applications , 2006 .

[14]  M. Misra,et al.  Sustainable Bio-Composites from Renewable Resources: Opportunities and Challenges in the Green Materials World , 2002, Renewable Energy.