Optimized Al Doping Improves Both Interphase Stability and Bulk Structural Integrity of Ni-Rich NMC Cathode Materials

The nickel-rich transition metal oxide—NMC, LiNi1–x–yMxCoyO2, 1 – x – y ≥ 0.6—shows great potential for use in lithium-ion batteries that exhibit high energy densities; however, large-scale use of ...

[1]  Zhian Zhang,et al.  Enhanced Cyclability and High-rate Capability of LiNi0.88Co0.095Mn0.025O2 Cathode by Homogeneous Al3+ Doping. , 2019, ACS applied materials & interfaces.

[2]  C. Yoon,et al.  Quaternary Layered Ni-Rich NCMA Cathode for Lithium-Ion Batteries , 2019, ACS Energy Letters.

[3]  Zhen-guo Wu,et al.  Construction of homogeneously Al3+ doped Ni rich Ni-Co-Mn cathode with high stable cycling performance and storage stability via scalable continuous precipitation , 2018, Electrochimica Acta.

[4]  Z. Y. Liu,et al.  Co-modification by LiAlO2-coating and Al-doping for LiNi0.5Co0.2Mn0.3O2 as a high-performance cathode material for lithium-ion batteries with a high cutoff voltage , 2018, Journal of Alloys and Compounds.

[5]  Ji‐Guang Zhang,et al.  Solid–Liquid Interfacial Reaction Trigged Propagation of Phase Transition from Surface into Bulk Lattice of Ni-Rich Layered Cathode , 2018, Chemistry of Materials.

[6]  Ji‐Guang Zhang,et al.  Revealing Cycling Rate-Dependent Structure Evolution in Ni-Rich Layered Cathode Materials , 2018, ACS Energy Letters.

[7]  Wangda Li,et al.  Extending the Service Life of High‐Ni Layered Oxides by Tuning the Electrode–Electrolyte Interphase , 2018, Advanced Energy Materials.

[8]  Min-jae Choi,et al.  High‐Capacity Concentration Gradient Li[Ni0.865Co0.120Al0.015]O2 Cathode for Lithium‐Ion Batteries , 2018 .

[9]  Ji‐Guang Zhang,et al.  High Voltage Operation of Ni‐Rich NMC Cathodes Enabled by Stable Electrode/Electrolyte Interphases , 2018 .

[10]  Ji‐Guang Zhang,et al.  Effect of calcination temperature on the electrochemical properties of nickel-rich LiNi0.76Mn0.14Co0.10O2 cathodes for lithium-ion batteries , 2018, Nano Energy.

[11]  Ji‐Guang Zhang,et al.  Simultaneous Stabilization of LiNi0.76 Mn0.14 Co0.10 O2 Cathode and Lithium Metal Anode by Lithium Bis(oxalato)borate as Additive. , 2018, ChemSusChem.

[12]  A. Dolocan,et al.  Modified High-Nickel Cathodes with Stable Surface Chemistry Against Ambient Air for Lithium-Ion Batteries. , 2018, Angewandte Chemie.

[13]  Wangda Li,et al.  Mn versus Al in Layered Oxide Cathodes in Lithium‐Ion Batteries: A Comprehensive Evaluation on Long‐Term Cyclability , 2018 .

[14]  Wangda Li,et al.  Facilitating the Operation of Lithium-ion Cells with High-nickel Layered Oxide Cathodes with a Small Dose of Aluminum , 2018 .

[15]  Wengao Zhao,et al.  Toward a stable solid-electrolyte-interfaces on nickel-rich cathodes: LiPO 2 F 2 salt-type additive and its working mechanism for LiNi 0.5 Mn 0.25 Co 0.25 O 2 cathodes , 2018 .

[16]  Evan M. Erickson,et al.  From Surface ZrO2 Coating to Bulk Zr Doping by High Temperature Annealing of Nickel‐Rich Lithiated Oxides and Their Enhanced Electrochemical Performance in Lithium Ion Batteries , 2018 .

[17]  J. Cabana,et al.  Mechanisms of Degradation and Strategies for the Stabilization of Cathode-Electrolyte Interfaces in Li-Ion Batteries. , 2018, Accounts of chemical research.

[18]  Hongyu Chen,et al.  Improving the Ni-rich LiNi0.5Co0.2Mn0.3O2 cathode properties at high operating voltage by double coating layer of Al2O3 and AlPO4 , 2017 .

[19]  Y. Abe,et al.  Improvement of the electrochemical performance of an NCA positive-electrode material of lithium ion battery by forming an Al-rich surface layer , 2017 .

[20]  C. Yoon,et al.  Extending the Battery Life Using an Al-Doped Li[Ni0.76Co0.09Mn0.15]O2 Cathode with Concentration Gradients for Lithium Ion Batteries , 2017 .

[21]  J. Cabana,et al.  Control of Chemical Structure in Core–Shell Nanocrystals for the Stabilization of Battery Electrode/Electrolyte Interfaces , 2017 .

[22]  Weishan Li,et al.  Insight into the interaction between layered lithium-rich oxide and additive-containing electrolyte , 2017 .

[23]  Chong Seung Yoon,et al.  Compositionally Graded Cathode Material with Long‐Term Cycling Stability for Electric Vehicles Application , 2016 .

[24]  Jun Ho Song,et al.  Investigation of new manganese orthophosphate Mn3(PO4)2 coating for nickel-rich LiNi0.6Co0.2Mn0.2O2 cathode and improvement of its thermal properties , 2016 .

[25]  Samuel S. Cartmell,et al.  Highly Stable Operation of Lithium Metal Batteries Enabled by the Formation of a Transient High‐Concentration Electrolyte Layer , 2016 .

[26]  M. J. McDonald,et al.  Copper Phosphate as a Cathode Material for Rechargeable Li Batteries and Its Electrochemical Reaction Mechanism , 2015 .

[27]  Min-Joon Lee,et al.  Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries. , 2015, Angewandte Chemie.

[28]  Kang Xu,et al.  Electrolytes and interphases in Li-ion batteries and beyond. , 2014, Chemical reviews.

[29]  Chaochao Fu,et al.  Nickel-rich layered microspheres cathodes: lithium/nickel disordering and electrochemical performance. , 2014, ACS applied materials & interfaces.

[30]  Masahiro Kinoshita,et al.  Capacity fading of LiAlyNi1−x−yCoxO2 cathode for lithium-ion batteries during accelerated calendar and cycle life tests (effect of depth of discharge in charge–discharge cycling on the suppression of the micro-crack generation of LiAlyNi1−x−yCoxO2 particle) , 2014 .

[31]  Masahiro Kinoshita,et al.  Capacity fade of LiAlyNi1−x−yCoxO2 cathode for lithium-ion batteries during accelerated calendar and cycle life tests (surface analysis of LiAlyNi1−x−yCoxO2 cathode after cycle tests in restricted depth of discharge ranges) , 2014 .

[32]  J. Cabana,et al.  Ultrathin Lithium-Ion Conducting Coatings for Increased Interfacial Stability in High Voltage Lithium-Ion Batteries , 2014 .

[33]  Yong Yang,et al.  Improved electrochemical performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode material by fluorine incorporation , 2013 .

[34]  Long Tan,et al.  High rate charge–discharge properties of LiNi1/3Co1/3Mn1/3O2 synthesized via a low temperature solid-state method , 2010 .

[35]  M. Doeff,et al.  Structure and Electrochemistry of LiNi1/3Co1/3-yMyMn1/3O2 (M=Ti, Al, Fe) Positive Electrode Materials , 2009 .

[36]  J. Dahn,et al.  The effect of Al substitution on the reactivity of delithiated LiNi1/3Mn1/3Co(1/3−z)AlzO2 with non-aqueous electrolyte , 2008 .

[37]  M. Armand,et al.  Building better batteries , 2008, Nature.

[38]  Yang‐Kook Sun,et al.  Synthesis and electrochemical properties of Li[Ni0.8Co0.1Mn0.1]O2 and Li[Ni0.8Co0.2]O2 via co-precipitation , 2006 .

[39]  Arumugam Manthiram,et al.  Progress in High‐Voltage Cathode Materials for Rechargeable Sodium‐Ion Batteries , 2018 .

[40]  Yang-Kook Sun,et al.  Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives , 2016 .

[41]  Evan M. Erickson,et al.  Studies of Aluminum-Doped LiNi0.5Co0.2Mn0.3O2: Electrochemical Behavior, Aging, Structural Transformations, and Thermal Characteristics , 2015 .