论文信息 - Damage assessment of structures using static test data

Damage assessment of structures using static test data

An analytical method is presented for identifying the properties of structural elements from static test data. A set of static forces is applied to a set of degrees of freedom (DOF) and displacements are measured at another set of DOF. Utilizing this analytical method, the structural element stiffnesses are identified using the applied forces and measured displacements. This method is capable of determining changes in structural element stiffnesses, including element failure. The identified cross-sectional properties of the structural elements can be used for damage assessment and to determine the structure's load-carrying capacity.

Masoud Sanayei | Oladipo Onipede | M. Sanayei | O. Onipede

[1] James L. Beck,et al. Determining models of structures from earthquake records , 1978 .

[2] J. Chen,et al. On-orbit damage assessment for large space structures , 1988 .

[3] M. Baruch. Optimal correction of mass and stiffness matrices using measured modes , 1982 .

[4] A. Kabe. Stiffness matrix adjustment using mode data , 1985 .

[5] Richard B. Nelson,et al. Identification of Structural Element Stiffnesses from Incomplete Static Test Data , 1986 .

[6] R. Haftka,et al. Sensitivity Analysis of Discrete Structural Systems , 1986 .

[7] Gary C. Hart,et al. System Identification in Structural Dynamics , 1977 .

[8] Masoud Sanayei,et al. Selection of noisy measurement locations for error reduction in static parameter identification , 1992 .

[9] Prabhat Hajela,et al. Recent developments in damage detection based on system identification methods , 1990 .

[10] Z. Sheena,et al. Theoretical stiffness matrix correction by using static test results , 1982 .

[11] A. Berman,et al. System identification of structural dynamic models Theoretical and practical bounds , 1984 .

[12] Masoud Sanayei,et al. STRUCTURAL ELEMENT STIFFNESS IDENTIFICATION FROM STATIC TEST DATA , 1991 .