Hard ultralight systems by thermal spray deposition of WC-CoCr onto AZ31 magnesium alloy

[1]  G. Gazzadi,et al.  Pre-treatment of Selective Laser Melting (SLM) surfaces for thermal spray coating , 2022, Surface and Coatings Technology.

[2]  A. Colella,et al.  Corrosion and wear performances of alternative TiC-based thermal spray coatings , 2022, Surface and Coatings Technology.

[3]  L. Łatka,et al.  Microstructure Investigation of WC-Based Coatings Prepared by HVOF onto AZ31 Substrate , 2021, Materials.

[4]  Yu Zhou,et al.  Highly reliable double-layer coatings on magnesium alloy surfaces for robust superhydrophobicity, chemical durability and electrical property , 2021, Ceramics International.

[5]  M. Milanesio,et al.  Low-Cost Biobased Coatings for AM60 Magnesium Alloys for Food Contact and Harsh Environment Applications , 2021, International journal of molecular sciences.

[6]  E. Toyserkani,et al.  Characterization of single- and multilayer cold-spray coating of Zn on AZ31B , 2021 .

[7]  L. Łatka,et al.  Comparison of Different Cermet Coatings Sprayed on Magnesium Alloy by HVOF , 2021, Materials.

[8]  R. Heimann.  Magnesium alloys for biomedical application: Advanced corrosion control through surface coating , 2021, Surface and Coatings Technology.

[9]  Y. Galindez,et al.  Intermetallic-Rich Layer Formation for Improving Corrosion Resistance of Magnesium Alloys , 2021, Metals and Materials International.

[10]  G. C. Chandra Mouli,et al.  Improved Corrosion Protection of Magnesium Alloys AZ31B and AZ91 by Cold-Sprayed Aluminum Coatings , 2021, Journal of Thermal Spray Technology.

[11]  J. Jain,et al.  Temperature dependence of abnormal grain growth in pure magnesium , 2021 .

[12]  M. Guagliano,et al.  Microstructure evolution and residual stress distribution of nanostructured Mg-8Gd-3Y alloy induced by severe shot peening , 2020 .

[13]  Anshul Yadav,et al.  Effect of SiC Reinforcement and Its Variation on the Mechanical Characteristics of AZ91 Composites , 2020, Materials.

[14]  Hua Li,et al.  Effect of cavitation on corrosion behavior of HVOF-sprayed WC-10Co4Cr coating with post-sealing in artificial seawater , 2020 .

[15]  B. Benedetti,et al.  Alternative metallic matrices for WC-based HVOF coatings , 2020 .

[16]  S. Korte-Kerzel,et al.  Normal and abnormal grain growth in magnesium: Experimental observations and simulations , 2020 .

[17]  A. Killinger,et al.  Residual Stress Evolution in Zirconia (Y8%) Coatings During Atmospheric Plasma Spraying for Substrates Under Rotating Kinematic , 2020, Journal of Thermal Spray Technology.

[18]  N. Dutta,et al.  Magnesium Alloys With Tunable Interfaces as Bone Implant Materials , 2020, Frontiers in Bioengineering and Biotechnology.

[19]  L. Łatka,et al.  Microstructure and Selected Properties of Cr3C2–NiCr Coatings Obtained by HVOF on Magnesium Alloy Substrates , 2020, Materials.

[20]  B. Torres,et al.  Fabrication, Wear, and Corrosion Resistance of HVOF Sprayed WC-12Co on ZE41 Magnesium Alloy , 2020, Coatings.

[21]  L. Łatka,et al.  Preliminary Studies on HVOF Sprayed Coatings on the Magnesium Alloys , 2020, Proceedings of 2nd Coatings and Interfaces Web Conference.

[22]  Gregory M. Smith,et al.  On the surface and system performance of thermally sprayed carbide coatings produced under controlled residual stresses , 2020 .

[23]  X. Bai,et al.  Surface nanocrystallization treatment of AZ91D magnesium alloy by cold spraying shot peening process , 2019, Surface and Coatings Technology.

[24]  X. Jie,et al.  Wear and Corrosion Resistance of Cold-Sprayed Cu-Based Composite Coatings on Magnesium Substrate , 2019, Journal of Thermal Spray Technology.

[25]  M. Gui,et al.  Residual Stress in HVOF Thermally Sprayed WC-10Co-4Cr Coating in Landing Gear Application , 2019, Journal of Thermal Spray Technology.

[26]  B. Torres,et al.  Characterization and mechanical properties of stainless steel coatings deposited by HVOF on ZE41 magnesium alloy , 2019, Surface and Coatings Technology.

[27]  D. Field,et al.  Effects of shot peening parameters on gradient microstructure and mechanical properties of TRC AZ31 , 2019, Materials Characterization.

[28]  R. Rani,et al.  Corrosion Resistance and Thermo-optical Properties of Lithium Polysilicate Spray Coated Anodized AZ31B Magnesium Alloy for Space Applications , 2019 .

[29]  W. M. Rainforth,et al.  Wear Resistance of Stainless Steel Coatings on ZE41 Magnesium Alloy , 2018, Journal of Thermal Spray Technology.

[30]  Yanbing Zhao,et al.  Corrosion resistance and antibacterial properties of polysiloxane modified layer-by-layer assembled self-healing coating on magnesium alloy. , 2018, Journal of colloid and interface science.

[31]  Yalin Lu,et al.  Effect of laser energy on microstructure of Mg-3Al-1Zn alloy treated by LSP , 2018 .

[32]  D. Joy,et al.  Characterizing Crystalline Materials in the SEM , 2018 .

[33]  G. Bolelli,et al.  Sliding wear behaviour of HVOF and HVAF sprayed Cr3C2-based coatings , 2017 .

[34]  D. Sreekanth,et al.  Insight of magnesium alloys and composites for orthopedic implant applications – a review , 2017 .

[35]  Donghui Wang,et al.  Sealing the Pores of PEO Coating with Mg-Al Layered Double Hydroxide: Enhanced Corrosion Resistance, Cytocompatibility and Drug Delivery Ability , 2017, Scientific Reports.

[36]  N. Višniakov,et al.  Increasing the wear resistance of Al-Mg components using thermal-spray coatings , 2017 .

[37]  J. Stoulil,et al.  Preparation and properties of plasma sprayed NiAl10 and NiAl40 coatings on AZ91 substrate , 2017 .

[38]  V. Antonovič,et al.  The effect of AlMg substrate preparation on the adhesion strength of plasma sprayed NiAl coatings , 2017 .

[39]  J. Guilemany,et al.  Plastic deformation phenomena during cold spray impact of WC-Co particles onto metal substrates , 2017 .

[40]  N. Markocsan,et al.  Sliding and abrasive wear behaviour of HVOF- and HVAF-sprayed Cr3C2–NiCr hardmetal coatings , 2016 .

[41]  G. Bolelli,et al.  Wear and impact behaviour of High Velocity Air-Fuel sprayed Fe-Cr-Ni-B-C alloy coatings , 2016 .

[42]  B. Torres,et al.  316L stainless steel coatings on ZE41 magnesium alloy using HVOF thermal spray for corrosion protection , 2016 .

[43]  G. Bolelli,et al.  Microstructure-based thermo-mechanical modelling of thermal spray coatings , 2015 .

[44]  A. Atrens,et al.  Optimisation of the high velocity oxygen fuel (HVOF) parameters to produce effective corrosion control coatings on AZ91 magnesium alloy , 2015 .

[45]  Heli Koivuluoto,et al.  Tribology of HVOF- and HVAF-sprayed WC-10Co4Cr hardmetal coatings : A comparative assessment , 2015 .

[46]  S. Agnew,et al.  Texture enhancement during grain growth of magnesium alloy AZ31B , 2015 .

[47]  B. Torres,et al.  Al/SiCp and Al11Si/SiCp coatings on AZ91 magnesium alloy by HVOF , 2015 .

[48]  Ming Liu,et al.  Preparation and characterization of the micro-arc oxidation composite coatings on magnesium alloys , 2014 .

[49]  V. Balasubramanian,et al.  Corrosion performance of atmospheric plasma sprayed alumina coatings on AZ31B magnesium alloy under immersion environment , 2014 .

[50]  M. Chi,et al.  Improving Corrosion Resistance of AZ31B Magnesium Alloy via a Conversion Coating Produced by a Protic Ammonium-Phosphate Ionic Liquid , 2014 .

[51]  X. Liu,et al.  Formation Mechanisms, Structure, and Properties of HVOF-Sprayed WC-CoCr Coatings: An Approach Toward Process Maps , 2014, Journal of Thermal Spray Technology.

[52]  S. Tiwari,et al.  Texture evolution during annealing of AZ31 Mg alloy rolled sheet and its effect on ductility , 2014 .

[53]  G. Bolelli,et al.  Comparative study of the dry sliding wear behaviour of HVOF-sprayed WC–(W,Cr)2C–Ni and WC–CoCr hardmetal coatings , 2014 .

[54]  Jian Ping Li,et al.  Development of Thermal Barrier Coatings on AZ91 Magnesium Alloy Surface , 2013 .

[55]  R. Arrabal,et al.  Assessment of duplex coating combining plasma electrolytic oxidation and polymer layer on AZ31 magnesium alloy , 2012 .

[56]  S. Harimkar,et al.  Laser Surface Engineering of Magnesium Alloys: A Review , 2012 .

[57]  M. Gui,et al.  Influence of Processing Parameters on Residual Stress of High Velocity Oxy-Fuel Thermally Sprayed WC-Co-Cr Coating , 2012, Journal of Materials Engineering and Performance.

[58]  G. Song,et al.  Recent progress in corrosion protection of magnesium alloys by organic coatings , 2012 .

[59]  A. Luo,et al.  Magnesium alloys for lightweight powertrains and automotive bodies , 2012 .

[60]  P. Kumta,et al.  Biodegradable poly(lactide-co-glycolide) coatings on magnesium alloys for orthopedic applications , 2012, Journal of Materials Science: Materials in Medicine.

[61]  M. Punset,et al.  Effect of oxygen/fuel ratio on the in-flight particle parameters and properties of HVOF WC-CoCr coatings , 2011 .

[62]  N. Lecis,et al.  A composite coating for corrosion protection of AM60B magnesium alloy , 2011 .

[63]  K. Sempf,et al.  Thermophysical and Microstructural Studies on Thermally Sprayed Tungsten Carbide-Cobalt Coatings , 2011 .

[64]  S. Sampath,et al.  Damage tolerant functionally graded WC–Co/Stainless Steel HVOF coatings , 2010 .

[65]  I. R. Ahmad,et al.  Magnesium Alloys: An Alternative for Aluminium in Structural Applications , 2010 .

[66]  Yonghao Gao,et al.  Electroless nickel plating on ZM6 (Mg–2.6Nd–0.6Zn–0.8Zr) magnesium alloy substrate , 2010 .

[67]  C. Cui,et al.  Growth characteristics and corrosion resistance of micro-arc oxidation coating on pure magnesium for biomedical applications , 2010 .

[68]  R. Arrabal,et al.  Al/SiC thermal spray coatings for corrosion protection of Mg–Al alloys in humid and saline environments , 2010 .

[69]  Alfredo Valarezo,et al.  Process Control and Characterization of NiCr Coatings by HVOF-DJ2700 System: A Process Map Approach , 2010 .

[70]  Kelvii Wei Guo,et al.  A Review of Magnesium/Magnesium Alloys Corrosion and its Protection~!2009-10-01~!2009-11-25~!2010-02-11~! , 2010 .

[71]  D. Fruchart,et al.  Mg alloy for hydrogen storage processed by SPD , 2009 .

[72]  A. Luo,et al.  Effect of strain ratio and strain rate on low cycle fatigue behavior of AZ31 wrought magnesium alloy , 2009 .

[73]  Rainer Gadow,et al.  Trajectory Generation and Coupled Numerical Simulation for Thermal Spraying Applications on Complex Geometries , 2009 .

[74]  M. Punset,et al.  Properties of WC-CoCr Based Coatings Deposited by Different HVOF Thermal Spray Processes , 2009 .

[75]  Massimiliano Barletta,et al.  Wear and Corrosion Behavior of HVOF-Sprayed WC-CoCr Coatings on Al Alloys , 2009, International Thermal Spray Conference.

[76]  N. Scharnagl,et al.  Corrosion protection of magnesium alloy AZ31 by coating with poly(ether imides) (PEI) , 2009 .

[77]  A. Coy,et al.  Corrosion behaviour of Mg/Al alloys with composite coatings , 2009 .

[78]  L. Edwards,et al.  Neutron diffraction residual strain measurements in post-treated thermal spray cermet coatings , 2008 .

[79]  A. Coy,et al.  Influence of microstructure and composition on the corrosion behaviour of Mg/Al alloys in chloride media , 2008 .

[80]  T. Pirling,et al.  Residual Stresses Distribution through Thick HVOF Sprayed Inconel 718 Coatings , 2008 .

[81]  E. S. Puchi-Cabrera,et al.  Mechanical properties and microstructure of WC–10Co–4Cr and WC–12Co thermal spray coatings deposited by HVOF , 2008 .

[82]  G. Gottstein,et al.  Dynamic recrystallization during high temperature deformation of magnesium , 2008 .

[83]  P. Scardi,et al.  Residual stresses in HVOF-sprayed ceramic coatings , 2008 .

[84]  N. Dahotre,et al.  Effect of laser surface treatment on corrosion and wear resistance of ACM720 Mg alloy , 2008 .

[85]  R. Gadow,et al.  Metallic and Dielectric Coatings on Glass Ceramic ‐ Characterization and Modeling of Residual Stresses , 2008 .

[86]  S. Leen,et al.  Residual stresses in high-velocity oxy-fuel thermally sprayed coatings – Modelling the effect of particle velocity and temperature during the spraying process , 2007 .

[87]  Mingxing Zhang,et al.  Plastic strain-induced grain refinement in the nanometer scale in a Mg alloy , 2007 .

[88]  K. Bobzin,et al.  Investigation of HVOF spraying on magnesium alloys , 2006 .

[89]  P. Christofides,et al.  Computational study of particle in-flight behavior in the HVOF thermal spray process , 2006 .

[90]  G. Song,et al.  Anodizing Treatments for Magnesium Alloys and Their Effect on Corrosion Resistance in Various Environments , 2006 .

[91]  Q. Jiang,et al.  High corrosion-resistance nanocrystalline Ni coating on AZ91D magnesium alloy , 2006 .

[92]  Hui Zhang,et al.  Mechanisms of oxidation and its role in microstructural evolution of metallic thermal spray coatings—Case study for Ni–Al , 2006 .

[93]  K. Kainer,et al.  Thermal Spraying of Magnesium Alloys for Corrosion and Wear Protection , 2005 .

[94]  L. Chiu,et al.  Improvement of corrosion properties in an aluminum-sprayed AZ31 magnesium alloy by a post-hot pressing and anodizing treatment , 2005 .

[95]  Arnold C. Vermeulen,et al.  Stress analysis of polycrystalline thin films and surface regions by X-ray diffraction , 2005 .

[96]  Syed H. Masood,et al.  Investigation of wear properties of magnesium and aluminum alloys for automotive applications , 2004 .

[97]  Lidong Zhao,et al.  Influence of spray parameters on the particle in-flight properties and the properties of HVOF coating of WC-CoCr , 2004 .

[98]  J. Matějíček,et al.  Role of thermal spray processing method on the microstructure, residual stress and properties of coatings: an integrated study for Ni–5 wt.%Al bond coats , 2004 .

[99]  T. Valente,et al.  Parametric study of an HVOF process for the deposition of nanostructured WC-Co coatings , 2003, Thermal Spray 2003: Proceedings from the International Thermal Spray Conference.

[100]  J. Wit,et al.  Investigation of the chromate conversion coating on Alclad 2024 aluminium alloy: effect of the pH of the chromate bath , 2002 .

[101]  S. Kuroda,et al.  Peening action and residual stresses in high-velocity oxygen fuel thermal spraying of 316L stainless steel , 2001 .

[102]  B. Kear,et al.  Factors controlling decarburization in HVOF sprayed nano-WC/Co hardcoatings , 2001 .

[103]  B. Mordike,et al.  Magnesium: Properties — applications — potential , 2001 .

[104]  J. Martín,et al.  A study of high velocity oxy-fuel thermally sprayed tungsten carbide based coatings. Part 1: Microstructures , 1998 .

[105]  J. Martín,et al.  Microstructural and analytical study of thermally sprayed WC-Co coatings in connection with their wear resistance , 1997 .

[106]  T. Clyne,et al.  An analytical model for predicting residual stresses in progressively deposited coatings Part 2: Cylindrical geometry , 1997 .

[107]  A. Karimi,et al.  Hydroabrasive wear behaviour of high velocity oxyfuel thermally sprayed WC-M coatings , 1993 .

[108]  J. E. Nerz,et al.  Microstructural evaluation of tungsten carbide-cobalt coatings , 1992 .

[109]  T. Clyne,et al.  The quenching stress in thermally sprayed coatings , 1991 .

[110]  William E. Frazier,et al.  Advanced lightweight alloys for aerospace applications , 1989 .