This report discusses the development and application of two alternative strategies in the form of global and sequential local response surface (RS) techniques for the solution of reliability-based optimization (RBO) problems. The problem of a thin-walled composite circular cylinder under axial buckling instability is used as a demonstrative example. In this case, the global technique uses a single second-order RS model to estimate the axial buckling load over the entire feasible design space (FDS) whereas the local technique uses multiple first-order RS models with each applied to a small subregion of FDS. Alternative methods for the calculation of unknown coefficients in each RS model are explored prior to the solution of the optimization problem. The example RBO problem is formulated as a function of 23 uncorrelated random variables that include material properties, thickness and orientation angle of each ply, cylinder diameter and length, as well as the applied load. The mean values of the 8 ply thicknesses are treated as independent design variables. While the coefficients of variation of all random variables are held fixed, the standard deviations of ply thicknesses can vary during the optimization process as a result of changes in the design variables. The structural reliability analysis is based on the first-order reliability method with reliability index treated as the design constraint. In addition to the probabilistic sensitivity analysis of reliability index, the results of the RBO problem are presented for different combinations of cylinder length and diameter and laminate ply patterns. The two strategies are found to produce similar results in terms of accuracy with the sequential local RS technique having a considerably better computational efficiency.
[1]
Fred Moses,et al.
A sequential response surface method and its application in the reliability analysis of aircraft structural systems
,
1994
.
[2]
R. Rackwitz,et al.
Structural reliability under combined random load sequences
,
1978
.
[3]
Vassili Toropov,et al.
Optimization of geometrically nonlinear thin-walled structures using the multipoint approximation method
,
1995
.
[4]
C. Bucher,et al.
A fast and efficient response surface approach for structural reliability problems
,
1990
.
[5]
Andrzej S. Nowak,et al.
Integration formulas to evaluate functions of random variables
,
1988
.
[6]
A. Stroud,et al.
Approximate integration formulas for certain spherically symmetric regions
,
1963
.
[7]
Malcolm I. G. Bloor,et al.
Aerodynamic Design of a Flying Wing Using Response Surface Methodology
,
2000
.
[8]
Leslie D. Liaw,et al.
Reliability-based optimization for robust design
,
2001
.
[9]
Vassili Toropov,et al.
Multiparameter structural optimization using FEM and multipoint explicit approximations
,
1993
.
[10]
M. Shinozuka.
Basic Analysis of Structural Safety
,
1983
.
[11]
M. Khalessi,et al.
Reliability calculation based on a robust importance sampling method
,
1996
.
[12]
Hid N. Grouni,et al.
Methods of structural safety
,
1986
.
[13]
Renaud Deraison,et al.
Nessus
,
2003,
login Usenix Mag..
[14]
Y.-T. Wu,et al.
COMPUTATIONAL METHODS FOR EFFICIENT STRUCTURAL RELIABILITY AND RELIABILITY SENSITIVITY ANALYSIS
,
1993
.