Ionizing Radiation Detector for Environmental Awareness in FPGA-Based Flight Computers

Ionizing radiation has a detrimental effect on digital electronics which need to operate in extraterrestrial environments. Modern reconfigurable digital fabrics are enabling new architectures for flight computers, which can exploit environmental awareness to increase their fault tolerance. In this paper, we present the design, modeling, and characterization of a radiation sensor which can be coupled with a reprogrammable hardware fabric to provide spatial information about radiation events that can cause logical faults. The sensor uses a wide area PN junction as its fundamental sensing element. As radiation passes through the sensor, electron hole pairs are created. The internal electric field of the PN junction sweeps the charge carriers in opposite directions which are ultimately sensed by orthogonally placed electrodes on the top and bottom of the sensor. This XY grid provides the spatial location of an ionizing radiation strike, which can be fed to the coupled computer fabric for environmental awareness. A reverse bias voltage is applied to the sensor in order to fully deplete the substrate for maximum charge carrier generation. The sensor is designed to detect the spatial location of radiation strikes of energy levels, which can cause faults in commercial field programmable gate arrays substrates.

[1]  Ricky W. Butler.  A Primer on Architectural Level Fault Tolerance , 2008 .

[2]  M. Xapsos.  A spatially restricted linear energy transfer equation. , 1992, Radiation research.

[3]  Ray Ladbury.  Radiation Hardening at the System Level , 2007 .

[4]  D. Neamen.  Semiconductor physics and devices basic principles Copy , 2004 .

[5]  Keith D. Underwood,et al.  FPGAs vs. CPUs: trends in peak floating-point performance , 2004, FPGA '04.

[6]  Andrew Holmes-Siedle,et al.  Handbook of Radiation Effects , 1993 .

[7]  Paul Graham,et al.  Radiation effects and mitigation strategies for modern FPGAs , 2004 .

[8]  M. Turala,et al.  Silicon tracking detectors—historical overview , 2005 .

[9]  Tilman Rohe,et al.  Pixel Detectors: From Fundamentals to Applications , 2006 .

[10]  Donald O. Frazier,et al.  Radiation-Hardened Electronics for Space Environments (RHESE) , 2007 .

[11]  H. Dijkstra,et al.  Overview of silicon detectors , 2002 .

[12]  Scott Hauck,et al.  The roles of FPGAs in reprogrammable systems , 1998, Proc. IEEE.

[13]  John Wawrzynek,et al.  BEE2: a high-end reconfigurable computing system , 2005, IEEE Design & Test of Computers.

[14]  E. Simoen,et al.  Radiation Effects in Advanced Semiconductor Materials and Devices , 2002 .

[15]  Wayne Luk,et al.  Reconfigurable computing: architectures and design methods , 2005 .

[16]  Andrew S. Keys,et al.  Exploration Technology Developments Program's Radiation Hardened Electronics for Space Environments (RHESE) Project Overview , 2008 .

[17]  J. Kemmer,et al.  New structures for position sensitive semiconductor detectors , 1988 .

[18]  C. Da Via,et al.  Advances in silicon detectors for particle tracking in extreme radiation environments , 2003 .

[19]  G. Lutz,et al.  Semiconductor Radiation Detectors , 2007 .

[20]  Sally Seidel,et al.  A review of design considerations for the sensor matrix in semiconductor pixel detectors for tracking in particle physics experiments , 2001 .

[21]  S. Dimitrijev.  Principles of semiconductor devices , 2005 .

[22]  G. Lutz,et al.  Semiconductor Radiation Detectors: Device Physics , 1999 .