Automatic Mass Balancing of Air-Bearing-Based Three-Axis Rotational Spacecraft Simulator

Abstract : Air-bearing-based spacecraft simulators are widely used to develop and verify spacecraft control techniques required by modern spacecraft applications. To create a spacelike environment with ground spacecraft simulators, the effects of gravity should be minimized. For a spherical air-bearing system with 3 rotational degrees of freedom, the center of rotation of the spacecraft simulator should be exactly aligned with the center of gravity. This paper presents the automatic mass balancing method, which compensates for the center of gravity offset from the center of rotation by actuating three proof masses on linear motion stages. Adaptive control of the automatic mass balancing system is used while the balancing masses are actuated in real time. The proposed techniques are implemented on the ground-based three-axis spacecraft simulator for the bifocal relay mirror spacecraft.

[1]  N. M. Hatcher,et al.  An automatic balancing system for use on frictionlessly supported attitude-controlled test platforms , 1968 .

[2]  J.A. Keim,et al.  Spacecraft inertia estimation via constrained least squares , 2006, 2006 IEEE Aerospace Conference.

[3]  J. Prado,et al.  Three-axis air-bearing based platform for small satellite attitude determination and control simulation , 2005 .

[4]  Soon-Jo Chung,et al.  Multidisciplinary Control of a Sparse Interferometric Array Satellite Testbed , 2003 .

[5]  Eric A. Mehiel,et al.  The Cal Poly Spacecraft Attitude Dynamics Simulator - CP/SADS , 2007 .

[6]  Lv Yan-dong.  Dynamic Modeling for Automatic Balancing System of 3-DOF Air-bearing Test-bed , 2005 .

[7]  R. Fullmer.  Dynamic ground testing of the Skipper Attitude Control System , 1996 .

[8]  G. A. Smith.  Dynamic simulators for test of space vehicle attitude control systems. , 1965 .

[9]  S. Tanygin,et al.  Mass Property Estimation Using Coasting Maneuvers , 1997 .

[10]  D. Small,et al.  A linearized analysis and design of an automatic balancing system for the three-axis air bearing table , 1963 .

[11]  Jana Lyn Schwartz,et al.  The Distributed Spacecraft Attitude Control System Simulator: From Design Concept to Decentralized Control , 2004 .

[12]  Jana L. Schwartz,et al.  AAS 04-122 SYSTEM IDENTIFICATION OF A SPHERICAL AIR-BEARING SPACECRAFT SIMULATOR , 2004 .

[13]  Panagiotis Tsiotras,et al.  A 3-DoF Experimental Test-Bed for Integrated Attitude Dynamics and Control Research , 2003 .

[14]  Yong Yang,et al.  Design and Development of the Small Satellite Attitude Control System Simulator , 2006 .

[15]  Brij N. Agrawal,et al.  Acquisition, Tracking and Pointing Control of the Bifocal Relay Mirror Spacecraft , 2002 .

[16]  Mason A. Peck,et al.  Historical review of air-bearing spacecraft simulators , 2003 .

[17]  Robert W. Mah,et al.  Imbalance identification and compensation for an airborne telescope , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

[18]  Mason A. Peck,et al.  AAS 03-127 AN AIRBEARING-BASED TESTBED FOR MOMENTUM-CONTROL SYSTEMS AND SPACECRAFT LINE OF SIGHT , 2003 .

[19]  J Prado,et al.  Dynamic balancing for a satellite attitude control simulator , 2000 .