Time-Reversal Processing for Downlink-Limited Passive UHF RFID in Pulsed Wave Mode

This letter provides experimental evidence that, in a complex environment, a time-reversal processing of electromagnetic waves can increase the energy efficiency of the reader to tag communication and, hence, can increase the activation range of a passive ultrahigh frequency (UHF) radio frequency identification (RFID) system. A first experiment performed in a free-space environment shows that in addition to the classical continuous wave (CW) mode, a type AD222 passive UHF RFID tag can successfully operate in a pulsed wave (PW) mode using pulses with half-width 5 ns and period 35 ns. In a second experiment performed in a complex multipath environment, it is shown that the energy efficiency of the RFID system in the PW mode can be increased by applying a time-reversal (TR) processing strategy. Furthermore, it is shown that both PW and TR strategies involve less energy to activate the tag than the classical CW mode does. As a consequence, given a fixed amount of energy, TR processing can increase the activation range of the RFID system.

[1]  Sicheng Zou,et al.  Performance Analysis of Passive UHF RFID Systems Under Cascaded Fading Channels and Interference Effects , 2015, IEEE Transactions on Wireless Communications.

[2]  Philippe Besnier,et al.  Robustness of a time-reversal ultra-wideband system in non-stationary channel environments , 2011 .

[3]  Gregory D. Durgin,et al.  Survey of range improvement of commercial RFID tags with Power Optimized Waveforms , 2010, 2010 IEEE International Conference on RFID (IEEE RFID 2010).

[4]  M. Fink,et al.  Time Reversal of Ultrasonic Fields-Part I : Basic Principles , 2000 .

[5]  Gregory D Durgin,et al.  Multipath Fading Measurements at 5.8 GHz for Backscatter Tags With Multiple Antennas , 2010, IEEE Transactions on Antennas and Propagation.

[6]  M. Fink,et al.  Time reversal of ultrasonic fields. I. Basic principles , 1992, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[7]  J. Landt,et al.  The history of RFID , 2005, IEEE Potentials.

[8]  C. Dehollain,et al.  Remotely powered addressable UHF RFID integrated system , 2005, IEEE Journal of Solid-State Circuits.

[9]  Rui Zhang,et al.  Waveform optimization for radio-frequency wireless power transfer : (Invited paper) , 2017, 2017 IEEE 18th International Workshop on Signal Processing Advances in Wireless Communications (SPAWC).

[10]  Yvan Duroc,et al.  Towards Autonomous Wireless Sensors: RFID and Energy Harvesting Solutions , 2014 .

[11]  P.V. Nikitin,et al.  Theory and measurement of backscattering from RFID tags , 2006, IEEE Antennas and Propagation Magazine.

[12]  G. Lerosey,et al.  Time reversal of electromagnetic waves. , 2004, Physical review letters.

[13]  Frank Cangialosi,et al.  Time reversed electromagnetic wave propagation as a novel method of wireless power transfer , 2016, 2016 IEEE Wireless Power Transfer Conference (WPTC).

[14]  Bruno Clerckx,et al.  Waveform Design for Wireless Power Transfer , 2016, IEEE Transactions on Signal Processing.

[15]  P.V. Nikitin,et al.  Performance limitations of passive UHF RFID systems , 2006, 2006 IEEE Antennas and Propagation Society International Symposium.

[16]  D. Dobkin.  The RF in RFID : UHF RFID in Practice Ed. 2 , 2012 .

[17]  Leilani Battle,et al.  Building the Internet of Things Using RFID: The RFID Ecosystem Experience , 2009, IEEE Internet Computing.

[18]  N. B. Carvalho,et al.  Extending Reading Range of Commercial RFID Readers , 2013, IEEE Transactions on Microwave Theory and Techniques.