Feasibility of ANFIS-PSO and ANFIS-GA Models in Predicting Thermophysical Properties of Al2O3-MWCNT/Oil Hybrid Nanofluid

The main purpose of the present paper is to improve the performance of the adaptive neuro-fuzzy inference system (ANFIS) in predicting the thermophysical properties of Al2O3-MWCNT/thermal oil hybrid nanofluid through mixing using metaheuristic optimization techniques. A literature survey showed that the use of an artificial neural network (ANN) is the most widely used method, although there are other methods that showed better performance. Moreover, it was found in the literature that artificial intelligence methods have been widely used for predicting the thermal conductivity of nanofluids. Thus, in the present study, genetic algorithms (GAs) and particle swarm optimization (PSO) have been utilized to search and determine the antecedent and consequent parameters of the ANFIS model. Solid concentration and temperature were considered as input variables, and thermal conductivity, dynamic viscosity, heat transfer performance, and pumping power in both the internal laminar and turbulent flow regimes were the outputs. In order to evaluate and compare the performance of the models, two statistical indices of root mean square error (RMSE) and determination coefficient (R) were utilized. Based on the results, both of the models are able to predict the thermophysical properties appropriately. However, the ANFIS-PSO model had a better performance than the ANFIS-GA model. Finally, the studied thermophysical properties were developed by the trained ANFIS-PSO model.

[1]  A. Asadi,et al.  The effect of surfactant and sonication time on the stability and thermal conductivity of water-based nanofluid containing Mg(OH)2 nanoparticles: An experimental investigation , 2017 .

[2]  Dervis Karaboga,et al.  Adaptive network based fuzzy inference system (ANFIS) training approaches: a comprehensive survey , 2018, Artificial Intelligence Review.

[3]  Zhanqiang Liu,et al.  Performance Evaluation of Vegetable Oil-Based Nano-Cutting Fluids in Environmentally Friendly Machining of Inconel-800 Alloy , 2019, Materials.

[4]  Ozgur Kisi,et al.  Assessment of Artificial Intelligence–Based Models and Metaheuristic Algorithms in Modeling Evaporation , 2019, Journal of Hydrologic Engineering.

[5]  Huei-Tau Ouyang Input optimization of ANFIS typhoon inundation forecast models using a Multi-Objective Genetic Algorithm , 2018 .

[6]  Yining Wu,et al.  A Study on Preparation and Stabilizing Mechanism of Hydrophobic Silica Nanofluids , 2018, Materials.

[7]  John H. Holland,et al.  Genetic Algorithms and the Optimal Allocation of Trials , 1973, SIAM J. Comput..

[8]  M. Afrand,et al.  Prediction of rheological behavior of MWCNTs–SiO2/EG–water non-Newtonian hybrid nanofluid by designing new correlations and optimal artificial neural networks , 2018, Journal of Thermal Analysis and Calorimetry.

[9]  A. Asadi,et al.  On the thermal characteristics of a manifold microchannel heat sink subjected to nanofluid using two-phase flow simulation , 2019, International Journal of Heat and Mass Transfer.

[10]  Hooman Yarmand,et al.  Assessment of thermal conductivity enhancement of nano-antifreeze containing single-walled carbon nanotubes: Optimal artificial neural network and curve-fitting , 2019, Physica A: Statistical Mechanics and its Applications.

[11]  Hosein Marzi,et al.  Training ANFIS Using the Enhanced Bees Algorithm and Least Squares Estimation , 2017, Intell. Autom. Soft Comput..

[12]  M. Safaei,et al.  Nanofluids as secondary fluid in the refrigeration system: Experimental data, regression, ANFIS, and NN modeling , 2019 .

[13]  A. Asadi,et al.  An experimental and theoretical investigation on the effects of adding hybrid nanoparticles on heat transfer efficiency and pumping power of an oil-based nanofluid as a coolant fluid , 2018 .

[14]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[15]  Seyed Amin Bagherzadeh,et al.  Synthesized CuFe2O4/SiO2 nanocomposites added to water/EG: Evaluation of the thermophysical properties beside sensitivity analysis & EANN , 2018, International Journal of Heat and Mass Transfer.

[16]  Wei Gao,et al.  The feasibility of genetic programming and ANFIS in prediction energetic performance of a building integrated photovoltaic thermal (BIPVT) system , 2019 .

[17]  Riccardo Poli,et al.  Particle swarm optimization , 1995, Swarm Intelligence.

[18]  Amir Mosavi,et al.  Developing an ANFIS-PSO Model to Predict Mercury Emissions in Combustion Flue Gases , 2019, Mathematics.

[19]  M. Afrand,et al.  Evaluating the effect of temperature and concentration on the thermal conductivity of ZnO-TiO2/EG hybrid nanofluid using artificial neural network and curve fitting on experimental data , 2019, Physica A: Statistical Mechanics and its Applications.

[20]  Omid Ali Akbari,et al.  A numerical investigation on the effects of mixed convection of Ag-water nanofluid inside a sim-circular lid-driven cavity on the temperature of an electronic silicon chip , 2019, Applied Thermal Engineering.

[21]  Wei-Mon Yan,et al.  Sensitivity analysis and application of machine learning methods to predict the heat transfer performance of CNT/water nanofluid flows through coils , 2019, International Journal of Heat and Mass Transfer.

[22]  C. C. Nwobi-Okoye,et al.  Multi-objective optimization and modeling of age hardening process using ANN, ANFIS and genetic algorithm: Results from aluminum alloy A356/cow horn particulate composite , 2019, Journal of Materials Research and Technology.

[23]  Young-Ju Kim,et al.  Experimental Study on Characteristics of Grinded Graphene Nanofluids with Surfactants , 2018, Materials.

[24]  Seyed Amin Bagherzadeh,et al.  Develop 24 dissimilar ANNs by suitable architectures & training algorithms via sensitivity analysis to better statistical presentation: Measure MSEs between targets & ANN for Fe–CuO/Eg–Water nanofluid , 2019, Physica A: Statistical Mechanics and its Applications.

[25]  Seyed Amin Bagherzadeh,et al.  A novel sensitivity analysis model of EANN for F-MWCNTs–Fe3O4/EG nanofluid thermal conductivity: Outputs predicted analytically instead of numerically to more accuracy and less costs , 2019, Physica A: Statistical Mechanics and its Applications.

[26]  H. Oztop,et al.  Numerical analysis and ANFIS modeling for mixed convection of CNT-water nanofluid filled branching channel with an annulus and a rotating inner surface at the junction , 2018, International Journal of Heat and Mass Transfer.

[27]  M. Afrand,et al.  Effect of sonication characteristics on stability, thermophysical properties, and heat transfer of nanofluids: A comprehensive review. , 2019, Ultrasonics sonochemistry.

[28]  Omid Ali Akbari,et al.  Numerical investigation of turbulent flow and heat transfer of nanofluid inside a wavy microchannel with different wavelengths , 2019, Journal of Thermal Analysis and Calorimetry.

[29]  S. Shamshirband,et al.  1 Developing an ANFIS-PSO Model to Estimate 2 Mercury Emission in Combustion Flue Gases 3 , 2019 .

[30]  Arash Karimipour,et al.  Electro- and thermophysical properties of water-based nanofluids containing copper ferrite nanoparticles coated with silica: Experimental data, modeling through enhanced ANN and curve fitting , 2018, International Journal of Heat and Mass Transfer.

[31]  Abdulwahab A. Alnaqi,et al.  Effects of magnetic field on the convective heat transfer rate and entropy generation of a nanofluid in an inclined square cavity equipped with a conductor fin: Considering the radiation effect , 2019, International Journal of Heat and Mass Transfer.

[32]  M. Afrand,et al.  Heat transfer efficiency of Al2O3-MWCNT/thermal oil hybrid nanofluid as a cooling fluid in thermal and energy management applications: An experimental and theoretical investigation , 2018 .

[33]  Stephen U. S. Choi Enhancing thermal conductivity of fluids with nano-particles , 1995 .

[34]  Josua P. Meyer,et al.  Experimental investigation and model development for effective viscosity of MgO–ethylene glycol nanofluids by using dimensional analysis, FCM-ANFIS and GA-PNN techniques , 2016 .

[35]  Masoud Afrand,et al.  Appraising influence of COOH-MWCNTs on thermal conductivity of antifreeze using curve fitting and neural network , 2019, Physica A: Statistical Mechanics and its Applications.

[36]  M. Afrand,et al.  Evaluation of thermal conductivity of MgO-MWCNTs/EG hybrid nanofluids based on experimental data by selecting optimal artificial neural networks , 2017 .

[37]  M. Afrand,et al.  An experimental study on stability and thermal conductivity of water/silica nanofluid: Eco-friendly production of nanoparticles , 2019, Journal of Cleaner Production.

[38]  Lingen Chen,et al.  A review on the utilized machine learning approaches for modeling the dynamic viscosity of nanofluids , 2019, Renewable and Sustainable Energy Reviews.

[39]  Xiaofeng Yu,et al.  Investigation on Synthesis, Stability, and Thermal Conductivity Properties of Water-Based SnO2/Reduced Graphene Oxide Nanofluids , 2017, Materials.

[40]  T. Bakhshpoori,et al.  FEASIBILITY OF PSO-ANFIS-PSO AND GA-ANFIS-GA MODELS IN PREDICTION OF PEAK GROUND ACCELERATION , 2018 .

[41]  Adnan M. Hussein,et al.  Adaptive Neuro-Fuzzy Inference System of friction factor and heat transfer nanofluid turbulent flow in a heated tube , 2016 .

[42]  S. Kannaiyan,et al.  Modeling of thermal conductivity and density of alumina/silica in water hybrid nanocolloid by the application of Artificial Neural Networks , 2019, Chinese Journal of Chemical Engineering.

[43]  Mohammad Hemmat Esfe,et al.  Thermal Conductivity Modeling of Aqueous CuO Nanofluids by Adaptive Neuro-Fuzzy Inference System (ANFIS) Using Experimental Data , 2017 .

[44]  Shahram Delfani,et al.  Experimental investigation and modeling of thermal conductivity of CuO–water/EG nanofluid by FFBP-ANN and multiple regressions , 2017, Journal of Thermal Analysis and Calorimetry.

[45]  Robert A. Taylor,et al.  Recent advances in modeling and simulation of nanofluid flows—Part II: Applications , 2019, Physics Reports.

[46]  Kwok-wing Chau,et al.  Developing an ANFIS-based swarm concept model for estimating the relative viscosity of nanofluids , 2018, Engineering Applications of Computational Fluid Mechanics.

[47]  S. Wongwises,et al.  An experimental and theoretical investigation on heat transfer capability of Mg (OH)2/MWCNT-engine oil hybrid nano-lubricant adopted as a coolant and lubricant fluid , 2018 .

[48]  Xianting Li,et al.  Utilization of ANN and ANFIS models to predict variable speed scroll compressor with vapor injection , 2017 .

[49]  I. Alarifi,et al.  An experimental investigation on the effects of ultrasonication time on stability and thermal conductivity of MWCNT-water nanofluid: Finding the optimum ultrasonication time. , 2019, Ultrasonics sonochemistry.

[50]  Jyh-Shing Roger Jang,et al.  ANFIS: adaptive-network-based fuzzy inference system , 1993, IEEE Trans. Syst. Man Cybern..

[51]  A. Asadi,et al.  Heat transfer performance of two oil-based nanofluids containing ZnO and MgO nanoparticles; a comparative experimental investigation , 2019, Powder Technology.

[52]  Saeed Heshmatian,et al.  Artificial intelligence in the field of nanofluids: A review on applications and potential future directions , 2019, Powder Technology.

[53]  Mohammad Hojjat,et al.  Nanofluids as coolant in a shell and tube heat exchanger: ANN modeling and multi-objective optimization , 2020, Appl. Math. Comput..

[54]  Ali J. Chamkha,et al.  A comprehensive review on mixed convection of nanofluids in various shapes of enclosures , 2019, Powder Technology.

[55]  A. Asadi A guideline towards easing the decision-making process in selecting an effective nanofluid as a heat transfer fluid , 2018, Energy Conversion and Management.

[56]  Hossein Bonakdari,et al.  Combination of Computational Fluid Dynamics, Adaptive Neuro-Fuzzy Inference System, and Genetic Algorithm for Predicting Discharge Coefficient of Rectangular Side Orifices , 2017 .

[57]  I. Alarifi,et al.  On the rheological properties of MWCNT-TiO2/oil hybrid nanofluid: An experimental investigation on the effects of shear rate, temperature, and solid concentration of nanoparticles , 2019, Powder Technology.

[58]  A. Al-Rashed,et al.  Effects on thermophysical properties of carbon based nanofluids: Experimental data, modelling using regression, ANFIS and ANN , 2018, International Journal of Heat and Mass Transfer.

[59]  Ahmad Hajinezhad,et al.  ANN and ANFIS models to predict the performance of solar chimney power plants , 2015 .

[60]  Ali J. Chamkha,et al.  On the nanofluids applications in microchannels: A comprehensive review , 2018 .

[61]  Siti Mariyam Hj. Shamsuddin,et al.  Particle swarm optimization for ANFIS interpretability and accuracy , 2016, Soft Comput..

[62]  Mohammad Ataei,et al.  Overbreak prediction in underground excavations using hybrid ANFIS-PSO model , 2018, Tunnelling and Underground Space Technology.

[63]  Isa Ebtehaj,et al.  Optimizing ANFIS for sediment transport in open channels using different evolutionary algorithms , 2017 .

[64]  Somchai Wongwises,et al.  Recent advances in preparation methods and thermophysical properties of oil-based nanofluids: A state-of-the-art review , 2019, Powder Technology.

[65]  Hossein Nejat Pishkenari,et al.  Observer design for a nano-positioning system using neural, fuzzy and ANFIS networks , 2019, Mechatronics.

[66]  M. Ahmadi,et al.  Prediction and modeling of MWCNT/Carbon (60/40)/SAE 10 W 40/SAE 85 W 90(50/50) nanofluid viscosity using artificial neural network (ANN) and self-organizing map (SOM) , 2018, Journal of Thermal Analysis and Calorimetry.

[67]  A. Asadi,et al.  The effect of temperature and solid concentration on dynamic viscosity of MWCNT/MgO (20–80)–SAE50 hybrid nano-lubricant and proposing a new correlation: An experimental study , 2016 .

[68]  Davood Toghraie,et al.  Designing artificial neural network on thermal conductivity of Al2O3–water–EG (60–40 %) nanofluid using experimental data , 2016, Journal of Thermal Analysis and Calorimetry.

[69]  Camilo A. Franco,et al.  An Enhanced Carbon Capture and Storage Process (e-CCS) Applied to Shallow Reservoirs Using Nanofluids Based on Nitrogen-Rich Carbon Nanospheres , 2019, Materials.

[70]  A. Dashti,et al.  H-2-selective mixed matrix membranes modeling using ANFIS, PSO-ANFIS, GA-ANFIS , 2017 .