Spark Assisted Chemical Engraving (SACE) in microfactory

Spark assisted chemical engraving (SACE) is a method for 3D microstructuring of glass or other non-conductive materials with high aspect ratio and smooth surface quality. It is applicable for rapid prototyping of microfluidic devices, for MEMS interfacing and similar applications. Typical feature size is in the hundreds of micrometres, down to a few tens of micrometres. It is a table-top technology requiring no clean rooms and no masks and with very modest space usage. It is thus well suited for microfactories. This paper gives a basic introduction to SACE and some machining examples.

[1]  Takahisa Masuzawa,et al.  Wire Electro-Discharge Grinding for Micro-Machining , 1985 .

[2]  Yoon Keun Kwak,et al.  Self-aligned microtool and electrochemical discharge machining (ECDM) for ceramic materials , 2001, Optical Engineering for Sensing and Nanotechnology.

[3]  J.-F. Zeberli,et al.  Miniature one-shot valve , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[4]  S. D. Collins,et al.  Removable tubing interconnects for glass-based micro-fluidic systems made using ECDM , 2004 .

[5]  Hannes Bleuler,et al.  Physical principles and miniaturization of spark assisted chemical engraving (SACE) , 2005 .

[6]  Hannes Bleuler,et al.  A model for electrode effects using percolation theory , 2004 .

[7]  Masayoshi Esashi,et al.  Absolute pressure sensors by air-tight electrical feedthrough structure , 1990 .

[8]  Hannes Bleuler,et al.  Bubble evolution on vertical electrodes under extreme current densities , 2005 .

[9]  Rolf Wüthrich,et al.  Three-Dimensional Structuring of Pyrex Glass Devices – Trajectory Control , 2002 .

[10]  Hannes Bleuler,et al.  A stochastic model for electrode effects , 2004 .

[11]  Electrochemistry under extreme current densities – Application to electrode effects , 2004 .

[12]  L. A. Hof,et al.  The gas film in Spark Assisted Chemical Engraving (SACE) - A key element for micro-machining applications , 2006 .

[13]  V. Fascio,et al.  Machining of non-conducting materials using electrochemical discharge phenomenon – An overview , 2005 .

[14]  V. Fascio,et al.  3D microstructuring of glass using electrochemical discharge machining (ECDM) , 1999, MHS'99. Proceedings of 1999 International Symposium on Micromechatronics and Human Science (Cat. No.99TH8478).

[15]  C. T. Yang,et al.  Micro Hole Machining of Borosilicate Glass through Electrochemical Discharge Machining (ECDM) , 2001 .

[16]  N F de Rooij,et al.  Multi-layer microfluidic glass chips for microanalytical applications , 2001, Fresenius' journal of analytical chemistry.