Analyses of iron and concrete shielding experiments at JAEA/TIARA with JENDL/HE-2007, ENDF/B-VII.1 and FENDL-3.0

Abstract IAEA released a new Fusion Evaluated Nuclear Data Library, FENDL-3.0, in 2012. FENDL-3.0 extends the neutron energy range from 20 MeV to greater than 60 MeV. Now there is increasing interest in nuclear data above 20 MeV. Thus we have analyzed the iron and concrete shielding experiments with the 40 and 65 MeV neutron sources at TIARA in Japan Atomic Energy Agency with the latest high-energy nuclear data libraries, JENDL/HE-2007, ENDF/B-VII.1 and FENDL-3.0. The Monte Carlo code MCNP-5 and ACE files of JENDL/HE-2007, ENDF/B-VII.1 and FENDL-3.0, which are supplied from JAEA, LANL and IAEA, respectively, were used for this analysis. The collimated neutron beam and test shields were modeled in the analysis. The measured source neutron data were adopted in the analysis. The followings are found out from the results; (1) Iron experiments: The calculation result with FENDL-3.0 agrees with the measured one best. That with JENDL/HE-2007 fairly agrees with the measured one. On the contrary that with ENDF/B-VII.1 drastically overestimates the measured one. It is confirmed that this overestimation is due to the smaller non-elastic scattering data of 56Fe in ENDF/B-VII.1. (2) Concrete experiments: The calculation result with ENDL/HE-2007 agrees with the measured one best, while those with FENDL-3.0 and ENDF/B-VII.1 drastically overestimate the measured one. It is confirmed that this overestimation is due to both the larger elastic and smaller non-elastic scattering data of 16O in FENDL-3.0 and ENDF/B-VII.1.