Unexpected strength–ductility response in an annealed, metastable, high-entropy alloy

Abstract The design of non-equiatomic high-entropy alloys (HEAs) opens huge compositional space to develop new materials with exceptional properties. Among them, HEAs with flexible microstructures showed an adaptive phase stability that enhanced the work hardening (WH) ability of the material drastically. With the same motive, here we present a new friction stir processed Fe39Mn20Co20Cr15Si5Al1 HEA that demonstrated an unexpected strength–ductility response just upon annealing. The inter-competing precipitation and grain/twin formation events during low-temperature annealing resulted in an unexpected f.c.c. (γ) → h.c.p. (ɛ) transformation. This unusual phase evolution triggered development of refined, ɛ-dominated microstructure coupled with a uniformly dispersed fine γ phase. The controlled 〈c+a〉 slip and twinning in the ɛ phase along with the transformation of a refined γ matrix resulted in higher elongation of 52% with enhanced ultimate tensile strength of 1.12 GPa during deformation. Thus, the metastability-assisted design of ɛ-martensite-dominant HEAs by annealing opens a new path to obtain strong yet ductile alloys, which is otherwise not feasible in conventional steel/HEA designs.

[1]  C. Tasan,et al.  Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off , 2016, Nature.

[2]  D. Raabe,et al.  The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation , 2015 .

[3]  R. Mishra,et al.  Extremely high strength and work hardening ability in a metastable high entropy alloy , 2018, Scientific Reports.

[4]  C. Tasan,et al.  Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys , 2017, Scientific Reports.

[5]  D. Ponge,et al.  Design of a novel Mn-based 1 GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability , 2011 .

[6]  P. Liaw,et al.  Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy , 2015, Nature Communications.

[7]  W. Wang,et al.  Microstructure and properties of bulk Al0.5CoCrFeNi high-entropy alloy by cold rolling and subsequent annealing , 2018, Materials Science and Engineering: A.

[8]  R. Mishra,et al.  A framework for shear driven dissolution of thermally stable particles during friction stir welding and processing , 2016 .

[9]  D. Miracle,et al.  A critical review of high entropy alloys and related concepts , 2016 .

[10]  Y. Estrin,et al.  Twinning-induced plasticity (TWIP) steels , 2018 .

[11]  T. Shun,et al.  Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes , 2004 .

[12]  S. S. Nene,et al.  Enhanced strength and ductility in a friction stir processing engineered dual phase high entropy alloy , 2017, Scientific Reports.

[13]  M. Calcagnotto,et al.  Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD , 2010 .

[14]  S. Mahajan,et al.  Formation of annealing twins in f.c.c. crystals , 1997 .

[15]  H. Hänninen,et al.  Strain hardening of cold-rolled lean-alloyed metastable ferritic-austenitic stainless steels , 2016 .

[16]  C. Haase,et al.  Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys , 2017, 1712.01627.

[17]  D. Rafaja,et al.  Deformation of Austenitic CrMnNi TRIP/TWIP Steels: Nature and Role of the ɛ−martensite , 2015 .

[18]  F. Delannay,et al.  The Developments of Cold-rolled TRIP-assisted Multiphase Steels. Al-alloyed TRIP-assisted Multiphase Steels , 2001 .

[19]  Peter Neumann,et al.  Supra-Ductile and High-Strength Manganese-TRIP/TWIP Steels for High Energy Absorption Purposes , 2003 .

[20]  C. Schuh,et al.  Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals , 2016 .

[21]  P. Rivera-Díaz-del-Castillo,et al.  Understanding martensite and twin formation in austenitic steels: A model describing TRIP and TWIP effects , 2017 .

[22]  Jien-Wei Yeh,et al.  Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys , 2012 .

[23]  H. Bhadeshia.  Twinning-Induced Plasticity Steels , 2012 .

[24]  D. Raabe,et al.  In-situ SEM observation of phase transformation and twinning mechanisms in an interstitial high-entropy alloy , 2018 .

[25]  Wenquan Cao,et al.  Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite , 2010 .

[26]  S. Kaloshkin,et al.  Face-centered cubic phase stability and martensitic transformation under deformation in Fe-Ni and Fe-Mn alloys nanostructured by mechanical alloying and high-pressure torsion , 2008 .

[27]  R. Xiong,et al.  Thermodynamic calculation of stacking fault energy of the Fe–Mn–Si–C high manganese steels , 2014 .

[28]  D. Ponge,et al.  Improvement of the work hardening rate of ultrafine grained steels through second phase particles , 2005 .

[29]  Karin A. Dahmen,et al.  Corrosion of Al xCoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior , 2017 .

[30]  Rajiv S. Mishra,et al.  Reversed strength-ductility relationship in microstructurally flexible high entropy alloy , 2018, Scripta Materialia.

[31]  D. Raabe,et al.  The influence of manganese content on the stacking fault and austenite/ε-martensite interfacial energies in Fe–Mn–(Al–Si) steels investigated by experiment and theory , 2014 .

[32]  A. Rabinkin,et al.  A study of γ → ε phase transformation in FeMn alloys induced by high pressure and plastic deformation , 1978 .

[33]  D. C. Aken,et al.  Thermodynamic Driving Force of the γ → ε Transformation and Resulting MS Temperature in High-Mn Steels , 2016, Metallurgical and Materials Transactions A.