An inverse method for distributed dynamic load identification of structures with interval uncertainties

Abstract A time-domain based method for distributed dynamic load identification is proposed in this study considering unknown-but-bounded uncertainties in structural systems. The spatiotemporal dynamic load is further approximated by Chebyshev orthogonal polynomial in time history. Thus, the problem of distributed load reconstruction may be converted into the issue of polynomial coefficient calculation at each sampling time by utilizing a series of dynamic analysis. In accordance with the practical engineering, the acceleration response is used as the system input. In terms of the uncertainty quantification problems, the interval analysis method based on Taylor expansion (IAMBTE) is systematically developed to accomplish the envelope interval of identified load. To facilitate the analysis, two kinds of load are required to be identified, among which the nominal value of the identified load may be straightforwardly achieved through the inverse system, whereas the interval boundaries should be settled by the interval propagation analysis. Eventually, two numerical examples are investigated to demonstrate the efficiency and precision of the developed methodology.

[1]  Z. Qiu,et al.  Comparison of dynamic response of structures with uncertain-but-bounded parameters using non-probabilistic interval analysis method and probabilistic approach , 2003 .

[2]  Jie Liu,et al.  DYNAMIC LOAD IDENTIFICATION FOR UNCERTAIN STRUCTURES BASED ON INTERVAL ANALYSIS AND REGULARIZATION METHOD , 2011 .

[3]  Xu Han,et al.  An inverse procedure for identification of loads on composite laminates , 2002 .

[4]  I. Elishakoff,et al.  Antioptimization of structures with large uncertain-but-non-random parameters via interval analysis , 1998 .

[5]  Chen Yang,et al.  A hybrid reduced-order modeling technique for nonlinear structural dynamic simulation , 2019, Aerospace Science and Technology.

[6]  David Thompson,et al.  The quantification of structure-borne transmission paths by inverse methods. Part 1: Improved singular value rejection methods , 2003 .

[7]  Dejie Yu,et al.  Dynamic load identification for stochastic structures based on Gegenbauer polynomial approximation and regularization method , 2015 .

[8]  S. S. Law,et al.  PRACTICAL ASPECTS IN MOVING LOAD IDENTIFICATION , 2002 .

[9]  H. Öry,et al.  RECONSTRUCTION OF INSTATIONARY WIND LOAD DISTRIBUTION ON STRUCTURES FROM MEASURED STRUCTURAL RESPONSE TIME HISTORIES , 1988 .

[10]  A. Hasanov,et al.  Identification of unknown spatial load distributions in a vibrating Euler–Bernoulli beam from limited measured data , 2016 .

[11]  Su-huan Chen,et al.  Interval static displacement analysis for structures with interval parameters , 2002 .

[12]  Yunlong Li,et al.  A dimension-wise method and its improvement for multidisciplinary interval uncertainty analysis , 2018, Applied Mathematical Modelling.

[13]  Xiaoyu Zhang,et al.  Non-probabilistic time-variant reliability assessment (NTRA) for the active control of vibration systems with convex uncertainties. , 2018, ISA transactions.

[14]  Paolo Pennacchi,et al.  Robust estimation of excitation in mechanical systems under model uncertainties , 2013 .

[15]  Xu Han,et al.  Distributed dynamic load identification based on shape function method and polynomial selection technique , 2017 .

[16]  S. N. Omkar,et al.  Neural network controller for minimizing hub shear forces in helicopter , 1998, Proceedings of the 1998 IEEE International Symposium on Intelligent Control (ISIC) held jointly with IEEE International Symposium on Computational Intelligence in Robotics and Automation (CIRA) Intell.

[17]  Xinqun Zhu,et al.  Time-varying wind load identification from structural responses , 2005 .

[18]  Pavel M. Trivailo,et al.  The inverse determination of aerodynamic loading from structural response data using neural networks , 2006 .

[19]  Jie Liu,et al.  A novel shape function approach of dynamic load identification for the structures with interval uncertainty , 2016 .

[20]  Christian Soize,et al.  Identification of stochastic loads applied to a non-linear dynamical system using an uncertain computational model and experimental responses , 2009 .

[21]  F. Gunawan,et al.  Two-step B-splines regularization method for solving an ill-posed problem of impact-force reconstruction , 2006 .

[22]  Hamed Ronasi,et al.  A numerical framework for load identification and regularization with application to rolling disc problem , 2011 .

[23]  H. R. Busby,et al.  Impact force identification using the general inverse technique , 1989 .

[24]  Xiaojun Wang,et al.  Reliability estimation of fatigue crack growth prediction via limited measured data , 2017 .

[25]  Lei Wang,et al.  Dynamic loads identification in presence of unknown but bounded measurement errors , 2015 .

[26]  Yasushi Mitsui,et al.  APPLICATION OF ARTIFICIAL NEURAL NETWORKS TO LOAD IDENTIFICATION , 1998 .

[27]  Lars J.L. Nordström,et al.  A CRITICAL COMPARISON OF TIME DOMAIN LOAD IDENTIFICATION METHODS , 2002 .

[28]  Kun Li,et al.  A probability density function discretization and approximation method for the dynamic load identification of stochastic structures , 2015 .

[29]  R. Ghanem,et al.  A WAVELET-BASED APPROACH FOR THE IDENTIFICATION OF LINEAR TIME-VARYING DYNAMICAL SYSTEMS , 2000 .

[30]  Xu Han,et al.  Inversion of loading time history using displacement response of composite laminates: Three-dimensional cases , 2002 .

[31]  Di Wu,et al.  A non-probabilistic reliability-based topology optimization (NRBTO) method of continuum structures with convex uncertainties , 2018, Structural and Multidisciplinary Optimization.

[32]  H. Inoue,et al.  Review of inverse analysis for indirect measurement of impact force , 2001 .

[33]  Ke Liang,et al.  Investigation on imperfection sensitivity of composite cylindrical shells using the nonlinearity reduction technique and the polynomial chaos method , 2018 .

[34]  Lei Wang,et al.  Inverse system method for dynamic loads identification via noisy measured dynamic responses , 2016 .

[35]  S. Sandesh,et al.  TIME DOMAIN IDENTIFICATION OF STRUCTURAL PARAMETERS AND INPUT TIME HISTORY USING A SUBSTRUCTURAL APPROACH , 2009 .

[36]  S. Karlsson,et al.  IDENTIFICATION OF EXTERNAL STRUCTURAL LOADS FROM MEASURED HARMONIC RESPONSES , 1996 .

[37]  J. Kim.  Identification of lateral tyre force dynamics using an extended Kalman filter from experimental road test data , 2009 .

[38]  D. Thompson,et al.  Comparison of methods for parameter selection in Tikhonov regularization with application to inverse force determination , 2007 .

[39]  Stefan Hurlebaus,et al.  IDENTIFICATION OF THE IMPACT LOCATION ON A PLATE USING WAVELETS , 1998 .

[40]  Jeffrey B. Burl,et al.  Continuous wavelet based linear time-varying system identification , 2011, Signal Process..

[41]  Xu Han,et al.  A novel approach for distributed dynamic load reconstruction by space–time domain decoupling , 2015 .