Computational study of crack growth in SiC/Al composites

An elastic-plastic finite-element analysis has been carried out to study the fracture behaviour of a SiC/6061-Al filamentary composite. The composite was modelled as a two-material cylinder subjected to uniform displacement and consisting of an inner cylinder simulating the fibre and a surrounding shell simulating the matrix. Using the strain energy density criterion, the critical applied displacements for crack initiation and stable crack growth were determined for three studied cases: an intact fibre, a cracked fibre, and a fully broken fibre. The numerical results were compared, where possible, to experimentally obtained ones. Finally, results concerning the variation of strain energy density versus distance from the crack tip, for the determination of the critical value of applied displacement at crack initiation, are presented and discussed.

[1]  F. Costanzo,et al.  A Micromechanics Approach for Constructing Locally Averaged Damage Dependent Constitutive Equations in Inelastic Composites , 1993 .

[2]  J. Qu,et al.  Numerical analysis of fiber fragmentation in a SiC/Al single-fiber composite specimen , 2000 .

[3]  B. Lerch,et al.  Tensile Deformation of SiC/Ti-15-3 Laminates , 1993 .

[4]  E. Gdoutos,et al.  Micromechanical analysis of nonlinear thermal deformation of filamentary metal matrix composites , 1991 .

[5]  Their Composites,et al.  Composite Materials: Fatigue and Fracture , 1992 .

[6]  L. Benabou,et al.  Comparative analysis of damage at interfaces of composites , 2002 .

[7]  K. Han,et al.  Dynamic observation of failure processes in composite materials , 1991 .

[8]  Zhirui Wang,et al.  Finite element simulation to investigate interaction between crack and particulate reinforcements in metal-matrix composites , 1995 .

[9]  W. S. Johnson,et al.  Thermal and mechanical behavior of metal matrix and ceramic matrix composites , 1990 .

[10]  P. Withers,et al.  Finite element modelling of frictional bridging during fatigue crack growth in fibre-reinforced metal matrix composites , 2002 .

[11]  G. C. Sih,et al.  Methods of analysis and solutions of crack problems : recent developments in fracture mechanics : theory and methods of solving crack problems , 1973 .

[12]  E. Gdoutos,et al.  Thermal stress analysis of a silicon carbide/aluminum composite , 1991 .

[13]  J. Knott.  Mechanics of Fracture , 1983 .

[14]  E. Gdoutos,et al.  Micromechanical analysis of filamentary metal matrix composites under longitudinal loading , 1991 .

[15]  E. Gdoutos,et al.  The influence of plate geometry and material properties on crack growth , 1986 .

[16]  W. Zeng,et al.  Interfacial bond strength and fracture energy at room and elevated temperature in titanium matrix composites (SCS-6/Timetal 834) , 2002 .

[17]  Cliff J. Lissenden,et al.  Numerical modelling of damage development and viscoplasticity in metal matrix composites , 1995 .

[18]  Alton L. Highsmith,et al.  Mechanical Characterization of Unnotched SCS 6 /Ti-15-3 Metal Matrix Composites at Room Temperature , 1990 .

[19]  I. Daniel,et al.  Characterization of Metal Matrix Composites , 1994 .

[20]  James G. Boyd,et al.  Micromechanical analysis of a continuous fiber metal matrix composite including the effects of matrix viscoplasticity and evolving damage , 1994 .

[21]  C. Lissenden,et al.  Inelastic deformation of metal matrix composites , 1993 .