Design and Modeling of a Large Amplitude Compliant Revolute Joint: The Helical Shape Compliant Joint

[1]  Tien-Fu Lu,et al.  Review of circular flexure hinge design equations and derivation of empirical formulations , 2008 .

[2]  Larry L. Howell,et al.  A Method for the Design of Compliant Mechanisms With Small-Length Flexural Pivots , 1994 .

[3]  M. Boyce,et al.  Constitutive models of rubber elasticity: A review , 2000 .

[4]  Bernard Bayle,et al.  Design of a Magnetic Resonance Imaging-Compatible Cable-Driven Manipulator With New Instrumentation and Synthesis Methods , 2014 .

[5]  Nicolae Lobontiu,et al.  Compliant Mechanisms: Design of Flexure Hinges , 2002 .

[6]  Zion Tsz Ho Tse,et al.  The case for MR‐compatible robotics: a review of the state of the art , 2008, The international journal of medical robotics + computer assisted surgery : MRCAS.

[7]  Sangbae Kim,et al.  Design and fabrication of multi-material structures for bioinspired robots , 2009, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[8]  Robert J. Wood,et al.  The First Takeoff of a Biologically Inspired At-Scale Robotic Insect , 2008, IEEE Transactions on Robotics.

[9]  Les A. Piegl,et al.  Curve and Surface Basics , 1995 .

[10]  Just L. Herder,et al.  Synthesis Methods in Compliant Mechanisms: An Overview , 2009 .

[11]  Gabriele Vassura,et al.  Comparative evaluation of the selective compliance in elastic joints for robotic structures , 2011, 2011 IEEE International Conference on Robotics and Automation.

[12]  Satyandra K. Gupta,et al.  Multi-material compliant mechanisms for mobile millirobots , 2011, 2011 IEEE International Conference on Robotics and Automation.

[13]  Angelo Oreste Andrisano,et al.  An Engineering Method for Comparing Selectively Compliant Joints in Robotic Structures , 2014, IEEE/ASME Transactions on Mechatronics.

[14]  Satyandra K. Gupta,et al.  Characterization and Modeling of Elastomeric Joints in Miniature Compliant Mechanisms , 2012 .

[15]  Jonathan E. Clark,et al.  Biomimetic design and fabrication of a hexapedal running robot , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[16]  John A. Mirth.  An Examination of Trispiral Hinges Suitable for Use in ABS-Based Rapid Prototyping of Compliant Mechanisms , 2014 .

[17]  Sridhar Kota,et al.  DESIGN OF LARGE-DISPLACEMENT COMPLIANT JOINTS , 2005 .

[18]  Robert J. Wood,et al.  Microrobot Design Using Fiber Reinforced Composites , 2008 .

[19]  Yong Mo Moon,et al.  DESIGN OF LARGE-DISPLACEMENT COMPLIANT JOINTS , 2005 .

[20]  Pierre Renaud,et al.  Combining Multi-Material Rapid Prototyping and Pseudo-Rigid Body Modeling for a new compliant mechanism , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[21]  Arnaud Bruyas,et al.  Towards Statically Balanced Compliant Joints Using Multimaterial 3D Printing , 2014 .