Synthesis and characterization of the conjugated polymers tethered with dipolar side chains containing a benzothiadiazole entity for bulk heterojunction solar cells

[1]  Yongfang Li,et al.  Influence of D/A Ratio on Photovoltaic Performance of a Highly Efficient Polymer Solar Cell System , 2012, Advanced materials.

[2]  F. Huang,et al.  New acceptor-pended conjugated polymers based on 3,6- and 2,7-carbazole for polymer solar cells , 2012 .

[3]  Boyuan Qi,et al.  Open-circuit voltage in organic solar cells , 2012 .

[4]  Jian Tang,et al.  Recent progress in the design of narrow bandgap conjugated polymers for high-efficiency organic solar cells , 2012 .

[5]  Yongfang Li,et al.  Improving the Ordering and Photovoltaic Properties by Extending π–Conjugated Area of Electron‐Donating Units in Polymers with D‐A Structure , 2012, Advanced materials.

[6]  Yongfang Li,et al.  High efficiency polymer solar cells based on poly(3-hexylthiophene)/indene-C70 bisadduct with solvent additive , 2012 .

[7]  Fengxian Xie,et al.  Dual Plasmonic Nanostructures for High Performance Inverted Organic Solar Cells , 2012, Advanced materials.

[8]  Chih-Yu Hsu,et al.  Novel conjugated copolymers based on dithiafulvalene moiety for bulk heterojunction solar cells , 2012 .

[9]  F. Huang,et al.  Recent development of push–pull conjugated polymers for bulk-heterojunction photovoltaics: rational design and fine tailoring of molecular structures , 2012 .

[10]  Jiann T. Lin,et al.  High-performance dye-sensitized solar cells based on 5,6-bis-hexyloxy-benzo[2,1,3]thiadiazole , 2012 .

[11]  Hsien-Hsin Chou,et al.  Recent developments in molecule-based organic materials for dye-sensitized solar cells , 2012 .

[12]  Yongfang Li,et al.  High‐Performance Inverted Polymer Solar Cells with Solution‐Processed Titanium Chelate as Electron‐Collecting Layer on ITO Electrode , 2012, Advanced materials.

[13]  A. Saeki,et al.  p/n Switching of Ambipolar Bithiazole–Benzothiadiazole-Based Polymers in Photovoltaic Cells , 2012 .

[14]  A. Jen,et al.  Fully visible-light-harvesting conjugated polymers with pendant donor-π-acceptor chromophores for photovoltaic applications , 2012 .

[15]  Yongfang Li.  Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption. , 2012, Accounts of chemical research.

[16]  Yingying Fu,et al.  Platinum(II)-bis(aryleneethynylene) complexes for solution-processible molecular bulk heterojunction solar cells. , 2012, Chemistry.

[17]  W. You,et al.  Rational Design of High Performance Conjugated Polymers for Organic Solar Cells , 2012 .

[18]  Martin A. Green,et al.  Solar cell efficiency tables (version 39) , 2012 .

[19]  Yong Cao,et al.  Simultaneous Enhancement of Open‐Circuit Voltage, Short‐Circuit Current Density, and Fill Factor in Polymer Solar Cells , 2011, Advanced materials.

[20]  Feng Xu,et al.  Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers. , 2011, Angewandte Chemie.

[21]  U. Jeng,et al.  Improving Device Efficiency of Polymer/Fullerene Bulk Heterojunction Solar Cells Through Enhanced Crystallinity and Reduced Grain Boundaries Induced by Solvent Additives , 2011, Advanced materials.

[22]  Yongfang Li,et al.  Synthesis and photovoltaic properties of copolymers of carbazole and thiophene with conjugated side chain containing acceptor end groups , 2011 .

[23]  John R. Reynolds,et al.  Dithienogermole as a fused electron donor in bulk heterojunction solar cells. , 2011, Journal of the American Chemical Society.

[24]  Chain‐Shu Hsu,et al.  Alternating copolymers incorporating cyclopenta[2,1‐b:3,4‐b′]dithiophene unit and organic dyes for photovoltaic applications , 2011 .

[25]  Wei You,et al.  Development of fluorinated benzothiadiazole as a structural unit for a polymer solar cell of 7 % efficiency. , 2011, Angewandte Chemie.

[26]  Yongfang Li,et al.  Copolymers of fluorene and thiophene with conjugated side chain for polymer solar cells: Effect of pendant acceptors , 2011 .

[27]  Cody W. Schlenker,et al.  The molecular nature of photovoltage losses in organic solar cells. , 2011, Chemical communications.

[28]  Wei You,et al.  Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in polymer-fullerene solar cells. , 2011, Journal of the American Chemical Society.

[29]  Ye Tao,et al.  Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b:2',3'-d]silole copolymer with a power conversion efficiency of 7.3%. , 2011, Journal of the American Chemical Society.

[30]  Jun-Ho Yum,et al.  Panchromatic engineering for dye-sensitized solar cells , 2011 .

[31]  Thuc-Quyen Nguyen,et al.  Small Molecule Solution-Processed Bulk Heterojunction Solar Cells† , 2011 .

[32]  Gang Li,et al.  Synthesis of fluorinated polythienothiophene-co-benzodithiophenes and effect of fluorination on the photovoltaic properties. , 2011, Journal of the American Chemical Society.

[33]  W. Wong,et al.  New low-bandgap polymetallaynes of platinum functionalized with a triphenylamine- benzothiadiazole donor–acceptor unit for solar cell applications , 2011 .

[34]  C. Chu,et al.  Synthesis and characterization of novel low‐bandgap triphenylamine‐based conjugated polymers with main‐chain donors and pendent acceptors for organic photovoltaics , 2010 .

[35]  A. Jen,et al.  Synthesis, Characterization, and Photovoltaic Properties of Carbazole-Based Two-Dimensional Conjugated Polymers with Donor-π-Bridge-Acceptor Side Chains , 2010 .

[36]  Yongfang Li,et al.  Alternating Copolymers of Carbazole and Triphenylamine with Conjugated Side Chain Attaching Acceptor Groups: Synthesis and Photovoltaic Application , 2010 .

[37]  Luping Yu,et al.  A new class of semiconducting polymers for bulk heterojunction solar cells with exceptionally high performance. , 2010, Accounts of chemical research.

[38]  Wai-Yeung Wong,et al.  Organometallic photovoltaics: a new and versatile approach for harvesting solar energy using conjugated polymetallaynes. , 2010, Accounts of chemical research.

[39]  P. Balraju,et al.  Enhanced Performance of Bulk Heterojunction Solar Cells Using Novel Alternating Phenylenevinylene Copolymers of Low Band Gap with Cyanovinylene 4-Nitrophenyls , 2010 .

[40]  Gang Li,et al.  For the Bright Future—Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4% , 2010, Advanced materials.

[41]  Fei Huang,et al.  Novel Silafluorene-Based Conjugated Polymers with Pendant Acceptor Groups for High Performance Solar Cells , 2010 .

[42]  Michele Maggini,et al.  Polymer Solar Cells: Recent Approaches and Achievements , 2010 .

[43]  Yang Yang,et al.  Polymer solar cells with enhanced open-circuit voltage and efficiency , 2009 .

[44]  M. Fahlman,et al.  Benzothiadiazole-Based Linear and Star Molecules: Design, Synthesis, and Their Application in Bulk Heterojunction Organic Solar Cells , 2009 .

[45]  Chain‐Shu Hsu,et al.  Synthesis of conjugated polymers for organic solar cell applications. , 2009, Chemical reviews.

[46]  Fei Huang,et al.  Development of new conjugated polymers with donor-pi-bridge-acceptor side chains for high performance solar cells. , 2009, Journal of the American Chemical Society.

[47]  Vishal Shrotriya,et al.  Organic photovoltaics: Polymer power , 2009 .

[48]  Yong Cao,et al.  Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices. , 2009, Accounts of chemical research.

[49]  Nelson E. Coates,et al.  Bulk heterojunction solar cells with internal quantum efficiency approaching 100 , 2009 .

[50]  Gang Li,et al.  Recent Progress in Polymer Solar Cells: Manipulation of Polymer:Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar Cells , 2009 .

[51]  Frederik C. Krebs,et al.  Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing , 2009 .

[52]  M. Fischer,et al.  Metal-free organic dyes for dye-sensitized solar cells: from structure: property relationships to design rules. , 2009, Angewandte Chemie.

[53]  Gang Liu,et al.  Triphenylamine−Fluorene Alternating Conjugated Copolymers with Pendant Acceptor Groups: Synthesis, Structure−Property Relationship, and Photovoltaic Application , 2009 .

[54]  Wai Lam,et al.  Effect of Oligothienyl Chain Length on Tuning the Solar Cell Performance in Fluorene‐Based Polyplatinynes , 2008 .

[55]  Yongfang Li,et al.  Conjugated Polymer Photovoltaic Materials with Broad Absorption Band and High Charge Carrier Mobility , 2008 .

[56]  Y. Xi,et al.  Tuning the absorption, charge transport properties, and solar cell efficiency with the number of thienyl rings in platinum-containing poly(aryleneethynylene)s. , 2007, Journal of the American Chemical Society.

[57]  M. Wienk,et al.  On the efficiency of polymer solar cells. , 2007, Nature materials.

[58]  S. Du,et al.  A triphenylamine-containing donor-acceptor molecule for stable, reversible, ultrahigh density data storage. , 2007, Journal of the American Chemical Society.

[59]  N. E. Coates,et al.  Efficient Tandem Polymer Solar Cells Fabricated by All-Solution Processing , 2007, Science.

[60]  A J Heeger,et al.  Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. , 2007, Nature materials.

[61]  Wai-Yeung Wong,et al.  Metallated conjugated polymers as a new avenue towards high-efficiency polymer solar cells. , 2007, Nature materials.

[62]  F. Biscarini,et al.  Solid-state assemblies and optical properties of conjugated oligomers combining fluorene and thiophene units , 2006 .

[63]  Christoph J. Brabec,et al.  High Photovoltaic Performance of a Low‐Bandgap Polymer , 2006 .

[64]  Liduo Wang,et al.  Review of recent progress in solid-state dye-sensitized solar cells , 2006 .

[65]  Zhan'ao Tan,et al.  Synthesis and photovoltaic properties of two-dimensional conjugated polythiophenes with bi(thienylenevinylene) side chains. , 2006, Journal of the American Chemical Society.

[66]  Christoph J. Brabec,et al.  Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency , 2006 .

[67]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[68]  Kuo-Chuan Ho,et al.  Organic dyes incorporating low-band-gap chromophores for dye-sensitized solar cells. , 2005, Organic letters.

[69]  Shui-Tong Lee,et al.  A High Tg Carbazole-Based Hole-Transporting Material for Organic Light-Emitting Devices , 2005 .

[70]  Dunlap,et al.  Charge-Dipole Model for the Universal Field Dependence of Mobilities in Molecularly Doped Polymers. , 1996, Physical review letters.

[71]  W. D. Gill.  Drift mobilities in amorphous charge‐transfer complexes of trinitrofluorenone and poly‐n‐vinylcarbazole , 1972 .

[72]  Adam P. Willard,et al.  Hot charge-transfer excitons set the time limit for charge separation at donor/acceptor interfaces in organic photovoltaics. , 2013, Nature materials.

[73]  G. Cerullo,et al.  Hot exciton dissociation in polymer solar cells. , 2013, Nature materials.

[74]  J. Fréchet,et al.  Polymer-fullerene composite solar cells. , 2008, Angewandte Chemie.

[75]  P. Blom,et al.  Electric-field and temperature dependence of the hole mobility in poly(p-phenylene vinylene) , 1997 .