The influence of imperfections on the nucleation and propagation of buckling driven delaminations

[1]  Jian-Sheng Wang,et al.  Effects of strain cycling on buckling, cracking and spalling of a thermally grown alumina on a nickel-based bond coat , 1999 .

[2]  Jian-Sheng Wang,et al.  Measurement and analysis of buckling and buckle propagation in compressed oxide layers on superalloy substrates , 1998 .

[3]  D. Clarke,et al.  Wrinkling of α-alumina films grown by oxidation—II. Oxide separation and failure , 1998 .

[4]  P. Wright,et al.  Influence of cyclic strain on life of a PVD TBC , 1998 .

[5]  A. Evans,et al.  Effects of Morphology on the Decohesion of Compressed Thin Films , 1998 .

[6]  M. Ortiz,et al.  Delamination of Compressed Thin Films , 1997 .

[7]  A. Evans,et al.  Effect of interface undulations on the thermal fatigue of thin films and scales on metal substrates , 1997 .

[8]  D. Clarke,et al.  The influence of the reactive element yttrium on the stress in alumina scales formed by oxidation , 1997 .

[9]  A. Giannakopoulos,et al.  A finite element analysis of configurational stability and finite growth of buckling driven delamination , 1995 .

[10]  A. Evans,et al.  The thermomechanical integrity of thin films and multilayers , 1995 .

[11]  E. Liniger,et al.  Delamination from edge flaws , 1994, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[12]  K. Nilsson,et al.  IMPERFECTION SENSITIVITY AT DELAMINATION BUCKLING AND GROWTH , 1993 .

[13]  M. D. Thouless,et al.  Growth and configurational stability of circular, buckling-driven film delaminations , 1992 .

[14]  Z. Suo,et al.  Mixed mode cracking in layered materials , 1991 .

[15]  Yonggang Huang,et al.  Fundamental solutions for microcracking induced by residual stress , 1990 .

[16]  John W. Hutchinson,et al.  Microcrack toughening in alumina/zirconia , 1987 .

[17]  D. J. Green.  Critical Microstructures for Microcracking in Al2O3‐ZrO2 Composites , 1982 .

[18]  A. Evans,et al.  Elastic/Plastic Indentation Damage in Ceramics: The Lateral Crack System , 1982 .

[19]  L. Cheng,et al.  Cracking in particulate composites due to thermalmechanical stress , 1981, International Journal of Fracture.

[20]  Anthony G. Evans,et al.  The strength of brittle materials containing second phase dispersions , 1972 .

[21]  W. T. Koiter.  THE STABILITY OF ELASTIC EQUILIBRIUM , 1970 .