Macro/micro-structure and mechanical properties of Al-6Mg-0.3Sc alloy fabricated by oscillating laser-arc hybrid additive manufacturing
暂无分享,去创建一个
Xiangshan Chen | Shibo Wu | Z. Lei | Jingwei Liang | Yan-bin Chen | Yu’an Chen | M. Jiang | Nan Jiang | Shengchong Ma | Bingchen Li | Bingwei Li | Yu'an Chen
[1] T. DebRoy,et al. Superior printed parts using history and augmented machine learning , 2022, npj Computational Materials.
[2] Ruzheng Wang,et al. Formation mechanism of Al-Zn-Mg-Cu alloy fabricated by laser-arc hybrid additive manufacturing: Microstructure evaluation and mechanical properties , 2022, Additive Manufacturing.
[3] C. Cai,et al. Porosity suppressing and grain refining of narrow-gap rotating laser-MIG hybrid welding of 5A06 aluminum alloy , 2021, Journal of Manufacturing Processes.
[4] M. Ivanov,et al. Wire Arc Additive Manufacturing of Al-Mg Alloy with the Addition of Scandium and Zirconium , 2021, Materials.
[5] Zhaodong Zhang,et al. Effect of Laser Power on the Microstructure and Mechanical Properties of 2319-Al Fabricated by Wire-Based Additive Manufacturing , 2021, Journal of Materials Engineering and Performance.
[6] T. Yuan,et al. Microstructure and Mechanical Properties of a Combination Interface between Direct Energy Deposition and Selective Laser Melted Al-Mg-Sc-Zr Alloy , 2021, Metals.
[7] L. Tonelli,et al. AA5083 (Al–Mg) plates produced by wire-and-arc additive manufacturing: effect of specimen orientation on microstructure and tensile properties , 2021, Progress in Additive Manufacturing.
[8] A. Nokhrin,et al. Investigation of superplasticity and dynamic grain growth in ultrafine-grained Al–0.5%Mg–Sc alloys , 2021 .
[9] Z. Lei,et al. An additively manufactured Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy with high specific strength, good thermal stability and excellent corrosion resistance , 2021 .
[10] Yue Zhao,et al. Microstructure Evolution and Mechanical Property Anisotropy of Wire and Arc-Additive-Manufactured Wall Structure Using ER2319 Welding Wires , 2020, Journal of Materials Engineering and Performance.
[11] X. P. Chen,et al. Investigation of the hardening behavior during recrystallization annealing in Al-Mg-Sc alloy , 2020 .
[12] J. O. Milewski,et al. Metallurgy, mechanistic models and machine learning in metal printing , 2020, Nature Reviews Materials.
[13] A. Nokhrin,et al. An investigation of thermal stability of structure and mechanical properties of Al-0.5Mg–Sc ultrafine-grained aluminum alloys , 2020 .
[14] Jianxun Zhang,et al. Comparative study on the microstructures and properties of wire+arc additively manufactured 5356 aluminium alloy with argon and nitrogen as the shielding gas , 2020 .
[15] Xin Lin,et al. Strength-ductility synergy of selective laser melted Al-Mg-Sc-Zr alloy with a heterogeneous grain structure , 2020 .
[16] T. Yuan,et al. Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms , 2020 .
[17] Jinglong Li,et al. Thermal Boundary Evolution of Molten Pool During Wire and Arc Additive Manufacturing of Single Walls of 5A06 Aluminum Alloy , 2020, Metals.
[18] Huimin Gu,et al. Effect of Sc Content on the Microstructure and Properties of Al–Mg–Sc Alloys Deposited by Wire Arc Additive Manufacturing , 2020, Metals and Materials International.
[19] J. Bergmann,et al. Wire Arc Additive Manufacturing (WAAM) of Aluminum Alloy AlMg5Mn with Energy-Reduced Gas Metal Arc Welding (GMAW) , 2020, Materials.
[20] J. Kuang,et al. Microalloying Al alloys with Sc: a review , 2020, Rare Metals.
[21] F. Niu,et al. Microstructure and mechanical properties of aluminum alloy prepared by laser-arc hybrid additive manufacturing , 2020 .
[22] Xiaoyan Zeng,et al. Laser-arc hybrid additive manufacturing of stainless steel with beam oscillation , 2020 .
[23] Z. Hao,et al. A pathway to mitigate macrosegregation of laser-arc hybrid Al-Si welds through beam oscillation , 2020 .
[24] G. Bi,et al. Al–Cu alloy fabricated by novel laser-tungsten inert gas hybrid additive manufacturing , 2020 .
[25] Xin Lin,et al. A study on obtaining equiaxed prior-β grains of wire and arc additive manufactured Ti–6Al–4V , 2020 .
[26] Y. Zhai,et al. Microstructure, defects, and mechanical properties of wire + arc additively manufactured Al Cu4.3-Mg1.5 alloy , 2020, Materials & Design.
[27] Yuanyuan Zhan,et al. Comparative study of microstructure evaluation and mechanical properties of 4043 aluminum alloy fabricated by wire-based additive manufacturing , 2020 .
[28] F. Czerwinski. Critical Assessment 36: Assessing differences between the use of cerium and scandium in aluminium alloying , 2020 .
[29] Z. Lei,et al. Microstructure and mechanical properties of a novel Sc and Zr modified 7075 aluminum alloy prepared by selective laser melting , 2019 .
[30] V. A. Korolev,et al. Microstructure and mechanical properties of a novel selective laser melted Al–Mg alloy with low Sc content , 2019, Materials Research Express.
[31] F. Martina,et al. Laser stabilization of GMAW additive manufacturing of Ti-6Al-4V components , 2019, Journal of Materials Processing Technology.
[32] Xizhang Chen,et al. Effect of heat input on microstructure and mechanical properties of Al-Mg alloys fabricated by WAAM , 2019, Applied Surface Science.
[33] T. DebRoy,et al. Scientific, technological and economic issues in metal printing and their solutions , 2019, Nature Materials.
[34] K. Dilger,et al. Wire and Arc Additive Manufacturing of Aluminum Components , 2019, Metals.
[35] A. Kaplan,et al. Laser enhancement of wire arc additive manufacturing , 2019, Journal of Laser Applications.
[36] Stewart Williams,et al. Tandem metal inert gas process for high productivity wire arc additive manufacturing in stainless steel , 2019, Additive Manufacturing.
[37] Zhaodong Zhang,et al. Surface quality and forming characteristics of thin-wall aluminium alloy parts manufactured by laser assisted MIG arc additive manufacturing , 2018, International Journal of Lightweight Materials and Manufacture.
[38] Karan Derekar,et al. A review of wire arc additive manufacturing and advances in wire arc additive manufacturing of aluminium , 2018 .
[39] Kun Liu,et al. Deformation microstructures and strengthening mechanisms for the wire+arc additively manufactured Al-Mg4.5Mn alloy with inter-layer rolling , 2018 .
[40] Ming Gao,et al. Wire arc additive manufacturing of Al-6Mg alloy using variable polarity cold metal transfer arc as power source , 2018 .
[41] E. Rajasekar,et al. Cold metal transfer (CMT) technology - An overview , 2017 .
[42] P. Rometsch,et al. Characterisation of a novel Sc and Zr modified Al–Mg alloy fabricated by selective laser melting , 2017 .
[43] Chuansong Wu,et al. Numerical simulation of temperature field, fluid flow and weld bead formation in oscillating single mode laser-GMA hybrid welding , 2017 .
[44] Andrey Koptyug,et al. Additive manufacturing of ITER first wall panel parts by two approaches: Selective laser melting and electron beam melting , 2017 .
[45] A. Spierings,et al. Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting , 2017 .
[46] Jinglong Li,et al. Geometric Limitation and Tensile Properties of Wire and Arc Additive Manufacturing 5A06 Aluminum Alloy Parts , 2017, Journal of Materials Engineering and Performance.
[47] Chunli Yang,et al. Mechanical properties of 2219-Al components produced by additive manufacturing with TIG , 2016 .
[48] J. Gu,et al. The effect of inter-layer cold working and post-deposition heat treatment on porosity in additively manufactured aluminum alloys , 2016 .
[49] R. Kaibyshev,et al. Effect of Grain Refinement on Jerky Flow in an Al-Mg-Sc Alloy , 2016, Metallurgical and Materials Transactions A.
[50] A. Addison,et al. Wire + Arc Additive Manufacturing , 2016 .
[51] Shikai Wu,et al. Effects of a paraxial TIG arc on high-power fiber laser welding , 2015 .
[52] Lin Wu,et al. Bead geometry prediction for robotic GMAW-based rapid manufacturing through a neural network and a second-order regression analysis , 2012, Journal of Intelligent Manufacturing.
[53] Ming Gao,et al. Process and joint characterizations of laser–MIG hybrid welding of AZ31 magnesium alloy , 2012 .
[54] Amauri Garcia,et al. Alloy composition and metal/mold heat transfer efficiency affecting inverse segregation and porosity of as-cast Al–Cu alloys , 2009 .
[55] Guilan Wang,et al. Metal direct prototyping by using hybrid plasma deposition and milling , 2009 .
[56] Y. Song,et al. Experimental investigations into rapid prototyping of composites by novel hybrid deposition process , 2006 .
[57] D. Seidman,et al. Composition evolution of nanoscale Al3Sc precipitates in an Al-Mg-Sc alloy: experiments and computations. , 2006 .
[58] P. Peyre,et al. Reduction of porosity content generated during Nd:YAG laser welding of A356 and AA5083 aluminium alloys , 2003 .
[59] V. V. Zakharov,et al. Effect of Scandium on the Structure and Properties of Aluminum Alloys , 2003 .
[60] A. Ardell,et al. Precipitation of Al3Sc in binary Al–Sc alloys , 2001 .
[61] V. V. Zakharov,et al. Scandium-alloyed aluminum alloys , 1992 .