Effect of thermal conductivities of shape stabilized PCM on under-floor heating system

A kind of heat conduction-enhanced shape-stabilized PCM (HCE-SSPCM) was utilized in the under-floor heating system for house heating in winter. This system charges heat by using cheap nighttime electricity and provides heating needs throughout all day. The effect of thermal conductivity of the PCM on energy savings and economic benefits of the system were theoretically and experimentally studied. HCE-SSPCM plates, made of (solid paraffin+liquid paraffin)/high density polyethylene/expanded graphite, were introduced to a test room with under-floor heating system. And the operating characteristics of the system were compared with that of the non-phase change energy storage system and the conventional air conditioning system. The results showed that enhancing the thermal conductivity of PCM in a certain range could significantly improve the energy efficiency of the heating system and reduce the thickness of thermal insulating materials. But the improving effect was not obvious when the thermal conductivity was beyond 1.0W/mK. The phase change energy storage system had a comfortable temperature environment and the best economic benefits among the three different heating types especially when the ratio of peak-valley electric price was high. Therefore, increasing the thermal conductivity of SSPCM will be of great significance for house heating.

[1]  K. Cen,et al.  Effects of various carbon nanofillers on the thermal conductivity and energy storage properties of paraffin-based nanocomposite phase change materials , 2013 .

[2]  Dan Zhou,et al.  Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .

[3]  R. Siegel.  Solidification of low conductivity material containing dispersed high conductivity particles , 1977 .

[4]  Sungwook Hong,et al.  Effects of wallboard design parameters on the thermal storage in buildings , 2011 .

[5]  Mohamed Khayet,et al.  Experimental tile with phase change materials (PCM) for building use , 2011 .

[6]  M. Sanchez,et al.  Thermal testing and numerical simulation of gypsum wallboards incorporated with different PCMs content , 2011 .

[7]  Parfait Tatsidjodoung,et al.  A review of potential materials for thermal energy storage in building applications , 2013 .

[8]  Per Heiselberg,et al.  Review of thermal energy storage technologies based on PCM application in buildings , 2013 .

[9]  A. Sari,et al.  Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material , 2007 .

[10]  Xingrong Zeng,et al.  Preparation, characterization and thermal properties of nanocapsules containing phase change material n-dodecanol by miniemulsion polymerization with polymerizable emulsifier , 2012 .

[11]  V. Salvadori,et al.  Bread baking as a moving boundary problem. Part 1: Mathematical modelling , 2009 .

[12]  Kamil Kaygusuz,et al.  High Density Polyethylene/Paraffin Composites as Form-stable Phase Change Material for Thermal Energy Storage , 2007 .

[13]  Mohammed M. Farid,et al.  Underfloor heating with latent heat storage , 2001 .

[14]  Lv Shilei,et al.  Impact of phase change wall room on indoor thermal environment in winter , 2006 .

[15]  Walter Wilhelm Focke,et al.  Thermally conductive phase-change materials for energy storage based on low-density polyethylene, soft Fischer–Tropsch wax and graphite , 2012 .

[16]  Qin Penghua.  Thermal performance of shape-stabilized phase-change materials , 2003 .

[17]  Ni Zhang,et al.  Preparation and thermal energy storage properties of paraffin/expanded graphite composite phase change material , 2012 .

[18]  Cristina H. Amon,et al.  PCM thermal control unit for portable electronic devices: experimental and numerical studies , 2003 .

[19]  Xin Wang,et al.  Influence of additives on thermal conductivity of shape-stabilized phase change material , 2006 .

[20]  Luisa F. Cabeza,et al.  Life Cycle Assessment of alveolar brick construction system incorporating phase change materials (PCMs) , 2013 .

[21]  S. Kalaiselvam,et al.  Sustainable thermal energy storage technologies for buildings: A review , 2012 .

[22]  Hazim B. Awbi,et al.  Performance of phase change material boards under natural convection , 2009 .

[23]  Xu Xu,et al.  Experimental study of under-floor electric heating system with shape-stabilized PCM plates , 2005 .

[24]  Luisa F. Cabeza,et al.  Comparison of three different devices available in Spain to test thermal properties of building materials including phase change materials , 2013 .

[25]  Jun Wang,et al.  Heat conduction enhanced shape-stabilized paraffin/HDPE composite PCMs by graphite addition: Preparation and thermal properties , 2010 .

[26]  Ahmet Sarı,et al.  Preparation, Thermal Properties and Thermal Reliability of Form-Stable Paraffin/Polypropylene Composite for Thermal Energy Storage , 2009 .

[27]  Antonio Fasano,et al.  Numerical solution of phase-change problems , 1973 .

[28]  K. Ismail,et al.  Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder , 2001 .

[29]  Wen-Long Cheng,et al.  Studies on thermal properties and thermal control effectiveness of a new shape-stabilized phase change material with high thermal conductivity , 2012 .

[30]  Zhengguo Zhang,et al.  Thermal energy storage cement mortar containing n-octadecane/expanded graphite composite phase change material , 2013 .

[31]  Renjian Zhang,et al.  Chemical characterization and source apportionment of PM 2 . 5 in Beijing : seasonal perspective , 2013 .

[32]  Zhongliang Liu,et al.  Experimental investigations on the characteristics of melting processes of stearic acid in an annulus and its thermal conductivity enhancement by fins , 2005 .

[33]  Li-jiu Wang,et al.  Fatty acid eutectic/polymethyl methacrylate composite as form-stable phase change material for thermal energy storage , 2010 .