Direct writing of chitosan scaffolds using a robotic system

Purpose – This paper aims to present a novel rapid prototyping (RP) fabrication methods and preliminary characterization for chitosan scaffolds. Design – A desktop rapid prototyping robot dispensing (RPBOD) system has been developed to fabricate scaffolds for tissue engineering (TE) applications. The system is a computer-controlled four-axis machine with a multiple-dispenser head. Neutralization of the acetic acid by the sodium hydroxide results in a precipitate to form a gel-like chitosan strand. The scaffold properties were characterized by scanning electron microscopy, porosity calculation and compression test. An example of fabrication of a freeform hydrogel scaffold is demonstrated. The required geometric data for the freeform scaffold were obtained from CT-scan images and the dispensing path control data were converted form its volume model. The applications of the scaffolds are discussed based on its potential for TE. Findings – It is shown that the RPBOD system can be interfaced with imaging techniques and computational modeling to produce scaffolds which can be customized in overall size and shape allowing tissue-engineered grafts to be tailored to specific applications or even for individual patients. Research limitations/implications – Important challenges for further research are the incorporation of growth factors, as well as cell seeding into the 3D dispensing plotting materials. Improvements regarding the mechanical properties of the scaffolds are also necessary. Originality/value – One of the important aspects of TE is the design scaffolds. For customized TE, it is essential to be able to fabricate 3D scaffolds of various geometric shapes, in order to repair tissue defects. RP or solid free-form fabrication techniques hold great promise for designing 3D customized scaffolds; yet traditional cell-seeding techniques may not provide enough cell mass for larger constructs. This paper presents a novel attempt to fabricate 3D scaffolds, using hydrogels which in the future can be combined with cells.

[1]  M. Cima,et al.  Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing. , 1996, Journal of biomaterials science. Polymer edition.

[2]  D Williams.  Engineering a concept: the creation of tissue engineering. , 1997, Medical device technology.

[3]  L G Griffith,et al.  Survival and function of hepatocytes on a novel three-dimensional synthetic biodegradable polymer scaffold with an intrinsic network of channels. , 1998, Annals of surgery.

[4]  Charles W. Patrick,et al.  Chapter II.9 – Tissue Engineered Construct Design Principles , 1998 .

[5]  Rolf Mülhaupt,et al.  Desktop manufacturing of complex objects, prototypes and biomedical scaffolds by means of computer‐assisted design combined with computer‐guided 3D plotting of polymers and reactive oligomers , 2000 .

[6]  D. Hutmacher,et al.  Scaffolds in tissue engineering bone and cartilage. , 2000, Biomaterials.

[7]  Stephen E. Feinberg,et al.  An image-based approach for designing and manufacturing craniofacial scaffolds. , 2000, International journal of oral and maxillofacial surgery.

[8]  I Zein,et al.  Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. , 2001, Journal of biomedical materials research.

[9]  R M Pilliar,et al.  Fabrication of porous calcium polyphosphate implants by solid freeform fabrication: a study of processing parameters and in vitro degradation characteristics. , 2001, Journal of biomedical materials research.

[10]  Miqin Zhang,et al.  Synthesis and characterization of macroporous chitosan/calcium phosphate composite scaffolds for tissue engineering. , 2001, Journal of biomedical materials research.

[11]  L G Griffith,et al.  Effect of pore size and void fraction on cellular adhesion, proliferation, and matrix deposition. , 2001, Tissue engineering.

[12]  Scott C. Brown,et al.  A three-dimensional osteochondral composite scaffold for articular cartilage repair. , 2002, Biomaterials.

[13]  Rainer Schmelzeisen,et al.  Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques , 2002 .

[14]  A Ahluwalia,et al.  Microsyringe-based deposition of two-dimensional and three-dimensional polymer scaffolds with a well-defined geometry for application to tissue engineering. , 2002, Tissue engineering.

[15]  Han Tong Loh,et al.  Fabrication of 3D chitosan–hydroxyapatite scaffolds using a robotic dispensing system , 2002 .

[16]  Wei Sun,et al.  Recent development on computer aided tissue engineering - a review , 2002, Comput. Methods Programs Biomed..

[17]  D. Hutmacher,et al.  Scaffold development using 3D printing with a starch-based polymer , 2002 .

[18]  S. Hollister,et al.  Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. , 2002, Biomaterials.

[19]  R. Landers,et al.  Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering. , 2002, Biomaterials.

[20]  A. Ahluwalia,et al.  Fabrication of PLGA scaffolds using soft lithography and microsyringe deposition. , 2003, Biomaterials.

[21]  D. Hutmacher,et al.  Osteogenic induction of human bone marrow-derived mesenchymal progenitor cells in novel synthetic polymer-hydrogel matrices. , 2003, Tissue engineering.

[22]  R. Landers,et al.  Biofunctional rapid prototyping for tissue‐engineering applications: 3D bioplotting versus 3D printing , 2004 .

[23]  Dietmar W Hutmacher,et al.  Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems. , 2004, Trends in biotechnology.

[24]  J. Lewis,et al.  Microperiodic structures: Direct writing of three-dimensional webs , 2004, Nature.

[25]  Michel Vert,et al.  Degradation and cell culture studies on block copolymers prepared by ring opening polymerization of epsilon-caprolactone in the presence of poly(ethylene glycol). , 2004, Journal of biomedical materials research. Part A.