Microstructural investigation of white etching layer on pearlite steel rail

Abstract The microstructure of the white etching layer (WEL) on the contact surface of a head-hardened pearlitic rail was investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and a three-dimensional atom probe (3DAP). The WEL was confirmed to be composed of severely deformed pearlite lamellae as well as nanocrystalline martensite, austenite and cementite. The carbon atoms in the topmost surface of the WEL were distributed nearly uniformly. A few atomic percent of carbon was dissolved in the ferrite of the deformed pearlite lamellae. The maximum hardness was observed in the deformed pearlite region within the WEL rather than on the topmost surface layer. The microstructural feature of the WEL and the reason why the deformed layer shows a white contrast in optical microscopy are discussed.

[1]  F. Izumi,et al.  A Rietveld-Analysis Programm RIETAN-98 and its Applications to Zeolites , 2000 .

[2]  N. D. Tomashov.  Theory of corrosion and protection of metals : the science of corrosion , 1966 .

[3]  G. Langford.  Deformation of pearlite , 1977 .

[4]  Fan,et al.  Lattice-parameter variation with carbon content of martensite. I. X-ray-diffraction experimental study. , 1995, Physical review. B, Condensed matter.

[5]  D. Scharnweber,et al.  Corrosion behaviour of a nanocrystalline FeA18 alloy , 1995 .

[6]  Peter L. Balise,et al.  Elements of Materials Science , 1959 .

[7]  G. Kurdumoff,et al.  X-Ray Studies of the Structure of Quenched Carbon Steel , 1928, Nature.

[8]  Zushu Hu,et al.  Evolution of dislocation structure induced by cyclic deformation in a directionally solidified cobalt base superalloy , 1999 .

[9]  H. G. Feller,et al.  Surface analysis of corrugated rail treads , 1991 .

[10]  M. Blamire,et al.  Field-ion specimen preparation using focused ion-beam milling , 1999 .

[11]  Hans-Jörg Fecht,et al.  Formation of white-etching layers on rail treads , 1996 .

[12]  T. S. Eyre,et al.  The formation of white layers at rubbing surfaces , 1972 .

[13]  K. Hono,et al.  Atom probe and transmission electron microscopy investigations of heavily drawn pearlitic steel wire , 1999 .

[14]  Hans-Jörg Fecht,et al.  Nanostructure formation on the surface of railway tracks , 2001 .

[15]  E. Lavernia,et al.  Enhanced oxidation resistance of nanocrystalline FeBSi materials , 1995 .

[16]  S. Nishida,et al.  Cementite decomposition in heavily drawn pearlite steel wire , 2001 .

[17]  B. Karlsson,et al.  Microstructural evaluation and interpretation of the mechanically and thermally affected zone under railway wheel flats , 1999 .

[18]  W. Stobbs,et al.  A transmission electron microscopy study of the white-etching layer on a rail head , 1984 .

[19]  Minoru Umemoto,et al.  Nanocrystallization of Steels by Severe Plastic Deformation , 2003 .

[20]  D. Rigney,et al.  Deformation substructures associated with very large plastic strains , 1992 .

[21]  Hans-Jörg Fecht,et al.  Surface modification, corrugation and nanostructure formation of high speed railway tracks , 1997 .

[22]  Werner Österle,et al.  Investigation of white etching layers on rails by optical microscopy, electron microscopy, X-ray and synchrotron X-ray diffraction , 2001 .

[23]  L. D. Blackburn,et al.  Phase transformations in iron-ruthenium alloys under high pressure☆ , 1965 .

[24]  James R. Rice,et al.  Embrittlement of interfaces by solute segregation , 1989 .

[25]  G. L. Kehl.  The Principles of Metallographic Laboratory Practice , 1949 .

[26]  Gang Liu,et al.  Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment , 2003 .

[27]  E. Werner,et al.  Microstructure features on rolling surfaces of railway rails subjected to heavy loading , 2003 .