Flow dynamics in a swirl combustor

A hybrid simulation approach is used to investigate the flow patterns in an axisymmetric swirl combustor configuration. Effective inlet boundary conditions are based on velocity data from Reynolds-averaged Navier-Stokes or actual laboratory measurements at the outlet of a fuel-injector nozzle, and large eddy simulations are used to study the unsteady non-reactive swirl flow dynamics downstream. Case studies ranging from single-swirler to more complex triple-swirler nozzles are presented to emphasize the importance of initial inlet conditions on the behaviour of the swirling flow entering a sudden expansion area, including swirl and radial numbers, inlet length and characteristic velocity profiles. Swirl of sufficient strength produces an adverse pressure gradient which can promote flow reversal or vortex breakdown, and the coupling between swirl and sudden expansion instabilities depends on the relative length of the inlet. The flow is found to be very sensitive to the detailed nature of the velocity radi...

[1]  P. Spalart.  Comments on the feasibility of LES for wings, and on a hybrid RANS/LES approach , 1997 .

[2]  R. M. C. So,et al.  Jet characteristics in confined swirling flow , 1985 .

[3]  D. Metzger,et al.  Measurements in turbulent swirling flow through an abrupt axisymmetric expansion , 1988 .

[4]  Christian Oliver Paschereit,et al.  Excitation of Thermoacoustic Instabilities by Interaction of Acoustics and Unstable Swirling Flow , 2000 .

[5]  T. Lund,et al.  Generation of Turbulent Inflow Data for Spatially-Developing Boundary Layer Simulations , 1998 .

[6]  A. Landsberg,et al.  An efficient parallel method for solving flows in complex three-dimensional geometries , 1994 .

[7]  János M. Beér,et al.  Combustion in swirling flows: A review , 1974 .

[8]  F. Grinstein,et al.  Large eddy simulation of premixed turbulent flow in a rearward-facing-step combustor , 2000 .

[9]  F. Grinstein,et al.  Monotonically integrated large eddy simulation of free shear flows , 1999 .

[10]  H. Mongia,et al.  Large-Eddy Simulation of a Gas Turbine Combustor Flow , 1999 .

[11]  P. J. Mason,et al.  On the magnitude of the subgrid-scale eddy coefficient in large-eddy simulations of turbulent channel flow , 1986, Journal of Fluid Mechanics.

[12]  Hukam Chand Mongia,et al.  Anchored CCD for Gas Turbine Combustor Design and Data Correlation , 1997 .

[13]  Parviz Moin,et al.  Method for Generating Equilibrium Swirling Inflow Conditions , 1998 .

[14]  T. Lund,et al.  On the Generation of Turbulent Inflow Conditions for Boundary Layer Simulations , 1996 .

[15]  Fernando F. Grinstein,et al.  Open boundary conditions in the simulation of subsonic turbulent shear flows , 1994 .

[16]  S. Leibovich,et al.  Disrupted states of vortex flow and vortex breakdown , 1977 .

[17]  Turgut Sarpkaya,et al.  Vortex Breakdown in Swirling Conical Flows , 1971 .

[18]  J. P. Boris,et al.  New insights into large eddy simulation , 1992 .

[19]  S. L. Lee,et al.  Velocity Field Characteristics of a Swirling Flow Combustor , 1983 .

[20]  F. Grinstein,et al.  Large Eddy simulation of high-Reynolds-number free and wall-bounded flows , 2002 .

[21]  Hukam Chand Mongia,et al.  Dry Low Emissions Premixer CCD Modeling and Validation , 1998 .

[22]  Hukam Chand Mongia,et al.  Empirical and Semi-Empirical Correlation of Emissions Data From Modern Turbopropulsion Gas Turbine Engines , 1996 .