Tubular bamboo charcoal for anode in microbial fuel cells

Abstract The anode material plays a significant role in determining the performance of microbial fuel cells (MFCs). In this study, the bamboo charcoal tube is proposed as a novel anode substrate by carbonizing the natural bamboo. Its surface functional groups, biocompatibility and internal resistance are thoroughly investigated. Performance of the MFCs with a conventional graphite tube anode and a bamboo charcoal tube anode is also compared. The results indicate that the tubular bamboo charcoal anode exhibits advantages over the graphite tube anode in terms of rougher surface, superior biocompatibility and smaller total internal resistance. Moreover, the X-ray photoelectron spectroscopy (XPS) analysis for the bamboo charcoal reveals that the introduced C–N bonds facilitate the electron transfer between the biofilm and electrodes. As a result, the MFC with a bamboo charcoal tube anode achieves a 50% improvement in the maximum power density over the graphite tube case. Furthermore, scale-up of the bamboo charcoal tube anode is demonstrated by employing a bundle of tubular bamboo charcoal to reach higher power output.

[1]  W. Verstraete,et al.  Bioanode performance in bioelectrochemical systems: recent improvements and prospects. , 2009, Trends in biotechnology.

[2]  Boyang Jia,et al.  Effects of the Pt loading side and cathode-biofilm on the performance of a membrane-less and single-chamber microbial fuel cell. , 2009, Bioresource technology.

[3]  Bruce E. Logan,et al.  Treatment of carbon fiber brush anodes for improving power generation in air-cathode microbial fuel cells , 2010 .

[4]  Juan Bisquert,et al.  Identifying charge and mass transfer resistances of an oxygen reducing biocathode , 2011 .

[5]  F. Harnisch,et al.  Layered corrugated electrode macrostructures boost microbial bioelectrocatalysis , 2012 .

[6]  J. Wimpenny,et al.  Bacterial community structure, compartmentalization and activity in a microbial fuel cell , 2006, Journal of applied microbiology.

[7]  Derek R. Lovley,et al.  Bug juice: harvesting electricity with microorganisms , 2006, Nature Reviews Microbiology.

[8]  Willy Verstraete,et al.  The anode potential regulates bacterial activity in microbial fuel cells , 2008, Applied Microbiology and Biotechnology.

[9]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[10]  Bruce E. Logan,et al.  Power generation using an activated carbon fiber felt cathode in an upflow microbial fuel cell , 2010 .

[11]  David T. Clark,et al.  Applications of ESCA to polymer chemistry. XVII. Systematic investigation of the core levels of simple homopolymers , 1978 .

[12]  B. Logan,et al.  Graphite fiber brush anodes for increased power production in air-cathode microbial fuel cells. , 2007, Environmental science & technology.

[13]  P. Liang,et al.  Electricity generation by an enriched phototrophic consortium in a microbial fuel cell , 2008 .

[14]  Ming-hua Zhou,et al.  An overview of electrode materials in microbial fuel cells , 2011 .

[15]  F. Harnisch,et al.  Comparative study on the performance of pyrolyzed and plasma-treated iron(II) phthalocyanine-based catalysts for oxygen reduction in pH neutral electrolyte solutions , 2009 .

[16]  Q. Liao,et al.  Anodic current distribution in a liter-scale microbial fuel cell with electrode arrays , 2013 .

[17]  Venkataramana Gadhamshetty,et al.  Impedance spectroscopy as a tool for non‐intrusive detection of extracellular mediators in microbial fuel cells , 2009, Biotechnology and bioengineering.

[18]  U. Schröder,et al.  A three-dimensionally ordered macroporous carbon derived from a natural resource as anode for microbial bioelectrochemical systems. , 2012, ChemSusChem.

[19]  F. Du,et al.  Nitrogen-Doped Carbon Nanotube Arrays with High Electrocatalytic Activity for Oxygen Reduction , 2009, Science.

[20]  Yi Cui,et al.  Carbon nanotube-coated macroporous sponge for microbial fuel cell electrodes , 2012 .

[21]  Boris Tartakovsky,et al.  Electrochemical characterization of anodic biofilm development in a microbial fuel cell , 2013, Journal of Applied Electrochemistry.

[22]  B. Raj,et al.  Preparation and characterization of biocompatible carbon electrodes , 2012 .

[23]  D. Park,et al.  Improved fuel cell and electrode designs for producing electricity from microbial degradation. , 2003, Biotechnology and bioengineering.

[24]  Andrew G. Glen,et al.  APPL , 2001 .

[25]  Stefano Freguia,et al.  Microbial fuel cells: methodology and technology. , 2006, Environmental science & technology.

[26]  Qingliang Zhao,et al.  A graphite-granule membrane-less tubular air-cathode microbial fuel cell for power generation under continuously operational conditions , 2007 .

[27]  G. Wallace,et al.  The nanostructure of three-dimensional scaffolds enhances the current density of microbial bioelectrochemical systems , 2013 .

[28]  Xing Xie,et al.  High-performance nanostructured supercapacitors on a sponge. , 2011, Nano letters.

[29]  K. Omine,et al.  Microbial fuel cell (MFC) for bioelectricity generation from organic wastes. , 2013, Waste management.

[30]  Rolf U. Halden,et al.  Pre-genomic, genomic and post-genomic study of microbial communities involved in bioenergy , 2008, Nature Reviews Microbiology.

[31]  Deepak Pant,et al.  The accurate use of impedance analysis for the study of microbial electrochemical systems. , 2012, Chemical Society reviews.

[32]  W. Verstraete,et al.  Microbial fuel cells: novel biotechnology for energy generation. , 2005, Trends in biotechnology.

[33]  Hong Liu,et al.  Production of electricity during wastewater treatment using a single chamber microbial fuel cell. , 2004, Environmental science & technology.