Research on SCARA robot sorting system based on CoDeSys

This article intends to build the SCARA robot sorting system. We analyzed the kinematics characteristics of the SCARA robot. The link coordinate system is established by D-H method, the forward and inverse kinematics equations are derived and solved. Then we developed the motion control program of SCARA robot through CoDeSys platform. The off-line simulation is realized by combining the forward and inverse kinematics with WPF 3D simulation technology. The data transmission and real-time simulation are realized by OPC DA communication technology. Finally, the camera calibration is completed by computer vision, the core, area, perimeter and contour of the workpiece are obtained by image processing.

[1]  ZhaoXin Guo,et al.  The application of OPC DA in factory data acquisition , 2012, 2012 IEEE International Conference on Computer Science and Automation Engineering (CSAE).

[2]  G. Oke,et al.  Gradient-descent based trajectory planning for regulation of a two-link flexible robotic arm , 2001, 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Proceedings (Cat. No.01TH8556).

[3]  J. Denavit,et al.  A kinematic notation for lower pair mechanisms based on matrices , 1955 .

[4]  G. Deng,et al.  An adaptive Gaussian filter for noise reduction and edge detection , 1993, 1993 IEEE Conference Record Nuclear Science Symposium and Medical Imaging Conference.

[5]  Dario Orive,et al.  Access to process data with OPC-DA using IEC61499 Service Interface Function Blocks , 2009, 2009 IEEE Conference on Emerging Technologies & Factory Automation.

[6]  Zhao Xue.  Image Segmentation Based on Global Binarization and Edge Detection , 2001 .