Grinding trajectory generation of hybrid robot based on Cartesian direct teaching technology

[1]  Fusaomi Nagata,et al.  Development of CAM system based on industrial robotic servo controller without using robot language , 2013 .

[2]  Jun Wu,et al.  Mechatronics modeling and vibration analysis of a 2-DOF parallel manipulator in a 5-DOF hybrid machine tool , 2018 .

[3]  Man Ho Kim,et al.  Kalman Predictive Redundancy System for Fault Tolerance of Safety-Critical Systems , 2010, IEEE Transactions on Industrial Informatics.

[4]  Yuwen Sun,et al.  An adaptive feedrate scheduling method of dual NURBS curve interpolator for precision five-axis CNC machining , 2013 .

[5]  Jianjun Yuan,et al.  Direct teaching of industrial manipulators using current sensors , 2017 .

[6]  Minzhou Luo,et al.  Measured accuracy improvement method of velocity and displacement based on adaptive Kalman filter , 2019, Sensor Review.

[7]  Cezary Zielinski,et al.  A prototype robot for polishing and milling large objects , 2003, Ind. Robot.

[8]  Maciej Petko,et al.  Trajectory tracking controller of the hybrid robot for milling , 2016 .

[9]  Rolf Biesenbach,et al.  Force-torque sensor integration in industrial robot control , 2014, 15th International Workshop on Research and Education in Mechatronics (REM).

[10]  Wu Jun,et al.  Workspace and dynamic performance evaluation of the parallel manipulators in a spray-painting equipment , 2017 .

[11]  Helmut Pottmann,et al.  Fitting B-spline curves to point clouds by curvature-based squared distance minimization , 2006, TOGS.

[12]  Sadettin Kapucu,et al.  Online teaching of robotic arm by human–robot interaction: end effector force/torque sensing , 2018, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[13]  Adriano Fagali de Souza,et al.  CAD/CAM interfaced algorithm reduces cutting force, roughness, and machining time in free-form milling , 2020, The International Journal of Advanced Manufacturing Technology.

[14]  Haitao Liu,et al.  Force/Torque Sensorless Compliant Control Strategy for Assembly Tasks Using a 6-DOF Collaborative Robot , 2019, IEEE Access.

[15]  Juliang Xiao,et al.  Research on the forcefree control of cooperative robots based on dynamic parameters identification , 2019, Ind. Robot.

[16]  Tian Huang,et al.  Inverse kinematics of a 5-axis hybrid robot with non-singular tool path generation , 2019, Robotics and Computer-Integrated Manufacturing.

[17]  Wenlei Xiao,et al.  Toolpath generation for partition machining of T-spline surface based on local refinement , 2019, The International Journal of Advanced Manufacturing Technology.

[18]  Yusuke Maeda,et al.  View-based teaching/playback for industrial manipulators , 2011, 2011 IEEE International Conference on Robotics and Automation.

[19]  Guoyang Shen,et al.  Design of admittance controller with sliding mode based on disturbance observer for elbow joint actuated by pneumatic muscles , 2020, Ind. Robot.

[20]  Hyungjun Park,et al.  A method for approximate NURBS curve compatibility based on multiple curve refitting , 2000, Comput. Aided Des..

[21]  Sören Larsson,et al.  Path planning for laser scanning with an industrial robot , 2008, Robotics Auton. Syst..

[22]  Heping Chen,et al.  Automatic Programming for Robotic Grinding Using Real Time 3D Measurement , 2017, 2017 IEEE 7th Annual International Conference on CYBER Technology in Automation, Control, and Intelligent Systems (CYBER).

[23]  Syh-Shiuh Yeh,et al.  Manipulator Point Teaching System Design Integrated with Image Processing and Iterative Learning Control , 2019, J. Intell. Robotic Syst..

[24]  Jae-Bok Song,et al.  Hybrid position and force control of a robot arm equipped with joint torque sensors , 2013, 2013 10th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI).

[25]  Adriano Fagali de Souza,et al.  Study of tool paths calculated by different commercial CAM systems and influences on the real machining time and surface roughness for milling free-form geometries , 2019 .

[26]  Ji Zhao,et al.  An offline predictive feedrate scheduling method for parametric interpolation considering the constraints in trajectory and drive systems , 2016 .

[27]  Jianjun Yuan,et al.  Torque control based direct teaching for industrial robot considering temperature-load effects on joint friction , 2019, Ind. Robot.

[28]  Haitao Liu,et al.  Deformation prediction based on an adaptive GA-BPNN and the online compensation of a 5-DOF hybrid robot , 2020, Ind. Robot.