Numerical modelling for blast-induced fragmentation in sublevel caving mines

Abstract The flow behavior of the ore and waste significantly affect the dilution in sublevel caving (SLC) mines. Drill and blast issues are identified as having a substantial impact upon SLC material flow. In the paper, blast-induced fragmentation in SLC was numerically investigated using the LS-DYNA code. A method was presented to evaluate fragmentation based on the damage description and a fragment identification routine implemented in the LS-PREPOST (a pre- and post-processing tool of LS-DYNA). The effects of the delay time and the primer position on fragmentation were investigated. The results indicated that a long delay time gives a finer fragmentation for the cases discussed in the paper. The results also showed that the middle primer and the top primer in SLC can give a fine fragmentation. The limitations of numerical modelling were also discussed.

[1]  Werner Riedel,et al.  THE RHT CONCRETE MODEL IN LS-DYNA , 2011 .

[2]  Catherine E. Johnson.  Fragmentation Analysis in the Dynamic Stress Wave Collision Regions in Bench Blasting , 2014 .

[3]  I. D. Brunton.  The Impact of Blasting on Sublevel Caving Material Flow Behaviour and Recovery , 2009 .

[4]  Ming Chen,et al.  Analysis of damage mechanisms and optimization of cut blasting design under high in-situ stresses , 2017 .

[5]  Kristina Jonsson,et al.  Design considerations for an underground room in a hard rock subjected to a high horizontal stress field at Rana Gruber, Norway , 2013 .

[6]  FranciscoJavier AyalaCarcedo,et al.  Drilling and Blasting of Rocks , 2017 .

[7]  H. Hansson,et al.  Determination of properties for emulsion explosives using cylinder expansion tests and numerical simulation , 2009 .

[8]  Changping Yi.  Improved blasting results with precise initiation : Numerical simulation of sublevel caving blasting , 2013 .

[9]  Agne Rustan.  The dynamics and fragmentation of blasted ore slices in scaled sublevel caving and slab models followed by accuracy analysis of the "Volume weight method" used for determination of ore content at loading , 2013 .

[10]  Gavin R. Power,et al.  Modelling granular flow in caving mines: large scale physical modelling and full scale experiments , 2004 .

[11]  Z. X. Zhang.  Increasing ore extraction by changing detonator positions in LKAB Malmberget mine , 2005 .

[12]  Bezalel C. Haimson,et al.  A new true triaxial cell for testing mechanical properties of rock, and its use to determine rock strength and deformability of Westerly granite , 2000 .

[13]  Wei Dong Song,et al.  Stability investigations around a mine tunnel through three-dimensional discontinuum and continuum stress analyses , 2012 .

[14]  I. D. Brunton,et al.  Modelling the impact of sublevel caving blast design and performance on material recovery , 2009 .

[15]  Wang Yong-qing.  Status of experimental application and prospect of bottom-hole detonation technology in China , 2003 .