A Practical Design Approach including Resistance Predictions for Medium-speed Catamarans

Abstract Medium-speed catamarans are under development as a new class of vessels to meet requirements for highly efficient sea transportation with low environmental impact. Reduced service speed and increased deadweight will increase transport efficiency. Compared to current high-speed catamarans, these new vessels will operate in a transitional speed range between high-speed craft and conventional displacement ships. In this paper, design guidelines to choose appropriate main dimensions for medium speed catamarans with minimum resistance were derived and a preliminary design was made. These vessels will operate at Froude numbers of about 0.35 and have a relatively low prismatic coefficient of about 0.5 in conjunction with a small transom immersion. Different methods are discussed to correctly predict the calm water resistance, with RANSE (Reynolds-averaged Navier-Stokes equations)-based flow simulations being the most promising. It is shown that they are capable of predicting the hydrodynamic characteristics of medium-speed catamarans, such as drag force, trim and sinkage with acceptable accuracy.

[1]  H. Schneekluth,et al.  Ship Design for Efficiency and Economy , 1987 .

[2]  Giles Thomas,et al.  Maximising efficiency and minimising cost in high speed craft , 2011 .

[3]  K. J. Rawson,et al.  Basic Ship Theory , 1968 .

[4]  D Bailey.  The NPL high speed round bilge : displacement hull series : resistance, propulsion, manoeuvring and seakeeping data , 1976 .

[5]  Walter H. Michel.  The sea-going catamaran ship its features and its feasibility1 , 1961 .

[6]  Prasanta K. Sahoo,et al.  Practical evaluation of resistance of high-speed catamaran hull forms—Part I , 2007 .

[7]  David W. Taylor,et al.  The speed and power of ships , 1910 .

[8]  Mustafa Insel,et al.  AN INVESTIGATION INTO THE RESISTANCE COMPONENTS OF HIGH SPEED DISPLACEMENT CATAMARANS , 1992 .

[9]  Anthony F. Molland,et al.  Resistance experiments on a series of high speed displacement catamaran forms: variation of prismatic coefficient , 1995 .

[10]  Riccardo Broglia,et al.  Analysis of the Hydrodynamic Performances of High-Speed Catamarans By Viscous Flow Solver , 2009 .

[11]  Davis,et al.  130m Wave piercer catamaran: A new energy efficient multihull operating at critical speeds , 2011 .

[12]  R L Trillo.  HIGH SPEED OVER WATER, IDEAS FROM THE PAST, THE PRESENT AND FOR THE FUTURE , 1991 .

[13]  Anthony F. Molland,et al.  Resistance experiments on a systematic series of high speed displacement catamaran forms: variation of length-displacement ratio and breadth-draught ratio , 1994 .

[14]  Volker Bertram,et al.  Practical Ship Hydrodynamics , 2000 .

[15]  P. Sahoo,et al.  Practical evaluation of resistance of high-speed catamaran hull forms—Part II , 2008 .

[16]  G Davidson,et al.  On the macro hydrodynamic design of highly efficient medium-speed catamarans with minimum resistance , 2012 .

[17]  R Sato,et al.  HYDRODYNAMIC DESIGN OF FAST FERRIES BY THE CONCEPT OF SUPER-SLENDER TWIN HULL , 1991 .

[18]  Nikolai Kornev,et al.  Experimental validation of viscous free surface flow computation around fast NPL catamarans at large drift angles , 2011 .

[19]  A Millward.  THE EFFECT OF HULL SEPARATION AND RESTRICTED WATER DEPTH ON CATAMARAN RESISTANCE , 1992 .

[20]  T Graul,et al.  DESIGN AND ANALYSIS OF MODERN HIGH SPEED CATAMARANS , 1972 .

[21]  V A Dubrovsky,et al.  Multi-hull ships , 2001 .