An intergranular creep crack growth model based on grain boundary sliding

[1]  X. Wu,et al.  Grain Boundary Sliding at Serrated Grain Boundaries , 1997 .

[2]  A. K. Koul,et al.  Grain boundary sliding in the presence of grain boundary precipitates during transient creep , 1995 .

[3]  Y. Leng.  Study of creep crack growth in 2618 and 8009 aluminum alloys , 1995 .

[4]  Y. Choi,et al.  Creep crack initiation and propagation in type 304 stainless steel at 873 K , 1991 .

[5]  M. Chaturvedi,et al.  Creep Crack Growth Behaviour of Alloy 718 , 1991 .

[6]  J. Immarigeon,et al.  THE EFFECT OF SERVICE EXPOSURE ON THE CREEP PROPERTIES OF CAST IN-'738LC SUBJECTED TO LOW STRESS HIGH TEMPERATURE CREEP CONDITIONS , 1988 .

[7]  M. Gee,et al.  Creep crack propagation in a bainitic 1Cr0.5Mo steel between 540 and 590°C , 1986 .

[8]  F. Pettit,et al.  Introduction to the high-temperature oxidation of metals , 2006 .

[9]  A. Pineau,et al.  The effect of microstructure and environment on the crack growth behaviour of Inconel 718 alloy at 650 °C under fatigue, creep and combined loading , 1982 .

[10]  J. Swearengen,et al.  Mechanical Testing for Deformation Model Development , 1982 .

[11]  M. Ashby,et al.  The growth of a dominant crack in a creeping material , 1982 .

[12]  T. Langdon,et al.  An evaluation of deformation models for grain boundary sliding , 1982 .

[13]  Hermann Riedel,et al.  Creep deformation at crack tips in elastic-viscoplastic solids , 1981 .

[14]  Frank A. McClintock,et al.  Creep relaxation of stress around a crack tip , 1981 .

[15]  R. Pilkington,et al.  Diffusion and deformation controlled creep crack growth , 1980 .

[16]  K. Sadananda,et al.  The effect of environment on the creep crack growth behavior several structural alloys , 1980 .

[17]  James R. Rice,et al.  Tensile Cracks in Creeping Solids , 1980 .

[18]  R. H. Kane,et al.  AN INVESTIGATION OF THE CREEP‐FATIGUE‐ENVIRONMENT INTERACTION IN A Ni‐BASE SUPERALLOY , 1979 .

[19]  Takayuki Kitamura,et al.  Application of J-Integral to High-Temperature Crack Propagation: Part I—Creep Crack Propagation , 1979 .

[20]  W. Nix,et al.  The stress dependence of the crack growth rate during creep , 1977, International Journal of Fracture.

[21]  K. Sadananda,et al.  Creep crack growth in alloy 718 , 1977 .

[22]  J. M. Larson,et al.  Metallurgical factors affecting the crack growth resistance of a superalloy , 1977 .

[23]  J. T. Barnby,et al.  Crack propagation during steady state creep , 1975 .

[24]  M. Ashby.  A first report on deformation-mechanism maps , 1972 .

[25]  M. Ashby.  Boundary defects, and atomistic aspects of boundary sliding and diffusional creep , 1972 .

[26]  T. Langdon.  Grain boundary sliding as a deformation mechanism during creep , 1970 .