Ethernet transport system supporting delay-sensitive real-time traffics

SUMMARY We propose and demonstrate an Ethernet transport system that can support hard real-time traffics with guaranteed throughput and very low jitter performance even in the presence of asynchronous traffics. The superframe structure-based Ethernet system first synchronizes all the nodes in a network by using the IEEE 1588-compliant boundary clock scheme and then reserves the traffic channels for synchronous traffics before accommodating both synchronous and asynchronous traffics in the superframe. Our experimental demonstration performed on field-programmable gate array-enabled Gigabit Ethernet test benches shows that the proposed scheme not only guarantees the throughput of the synchronous frames but also substantially reduces the jitter of the synchronous frames less than 110 ns after seven-hop transmission. Copyright © 2013 John Wiley & Sons, Ltd.

[1]  Li Qiang Tao,et al.  Low-jitter slot assignment algorithm for deadline-aware packet transmission in wireless video surveillance sensor networks , 2011, Int. J. Commun. Syst..

[2]  Daniele Marioli,et al.  A Distributed Instrument for Performance Analysis of Real-Time Ethernet Networks , 2008, IEEE Transactions on Industrial Informatics.

[3]  Kang Lee,et al.  IEEE 1588 standard for a precision clock synchronization protocol for networked measurement and control systems , 2002, 2nd ISA/IEEE Sensors for Industry Conference,.

[4]  L. Winkel Real-Time Ethernet in IEC 61784-2 and IEC 61158 series , 2006, 2006 4th IEEE International Conference on Industrial Informatics.

[5]  Jürgen Jasperneite,et al.  A Proposal for a Generic Real-Time Ethernet System , 2009, IEEE Transactions on Industrial Informatics.

[6]  H. Buttner,et al.  Real-time ethernet the EtherCAT solution , 2004 .

[7]  K. K. Ramakrishnan,et al.  The Ethernet capture effect: analysis and solution , 1994, Proceedings of 19th Conference on Local Computer Networks.

[8]  Max Felser,et al.  Real-Time Ethernet - Industry Prospective , 2005, Proceedings of the IEEE.

[9]  Hanlim Lee,et al.  A Novel Method for Providing Precise Time Synchronization in a Distributed Control System Using Boundary Clock , 2009, IEEE Transactions on Instrumentation and Measurement.

[10]  Insup Lee,et al.  Hardware Acceleration for Conditional State-Based Communication Scheduling on Real-Time Ethernet , 2009, IEEE Transactions on Industrial Informatics.

[11]  R. Court Real-time Ethernet , 1992, Comput. Commun..

[12]  Shang-Juh Kao,et al.  A Slot-based BS scheduling with Maximum Latency Guarantee and Capacity First in 802.16e networks , 2010, The 40th International Conference on Computers & Indutrial Engineering.

[13]  Raimond Pigan,et al.  Automating with PROFINET: Industrial Communication Based on Industrial Ethernet , 2008 .