Flammability behaviour of wood and a review of the methods for its reduction
暂无分享,去创建一个
[1] P. Jiang,et al. Synthesis, characteristic, and application of new flame retardant containing phosphorus, nitrogen, and silicon , 2006 .
[2] H. Horacek,et al. Advantages of flame retardants based on nitrogen compounds , 1996 .
[3] D. Meier,et al. Application of analytical pyrolysis for wood fire protection control , 2007 .
[4] Roger M. Rowell,et al. Handbook of wood chemistry and wood composites. , 2005 .
[5] Z. Karpovič,et al. Toxicity research of smouldering and flaming pine timber treated with fire retardant solutions , 2012 .
[6] B. Schartel,et al. Pyrolysis combustion flow calorimeter: A tool to assess flame retarded PC/ABS materials? , 2007 .
[7] G. Malucelli,et al. Hybrid phosphorus-doped silica architectures derived from a multistep sol-gel process for improving thermal stability and flame retardancy of cotton fabrics , 2012 .
[8] J. de Boer,et al. Phosphorus flame retardants: properties, production, environmental occurrence, toxicity and analysis. , 2012, Chemosphere.
[9] J. Quintiere. Principles of Fire Behavior , 1997 .
[10] R. Young. The chemistry of solid wood , 1985, Wood Science and Technology.
[11] Raymond Friedman,et al. Principles of Fire Protection Chemistry , 1989 .
[12] W. Fan,et al. The pyrolysis and ignition of charring materials under an external heat flux , 2003 .
[13] A. M. Pereyra,et al. Flame-retardant impregnants for woods based on alkaline silicates , 2009 .
[14] D. T. Liang,et al. In-Depth Investigation of Biomass Pyrolysis Based on Three Major Components: Hemicellulose, Cellulose and Lignin , 2006 .
[15] L. S. Gal′braikh,et al. Fire-resistant polymer nanocomposites based on metal oxides and hydroxides , 2010 .
[16] G. Malucelli,et al. Heat and moisture transfer in sol–gel treated cotton fabrics , 2012, Journal of Thermal Analysis and Calorimetry.
[17] Matti Kokkala,et al. Application of a one-dimensional thermal flame spread model on predicting the rate of heat release in the SBI test , 2001 .
[18] Sheau-Horng Lin,et al. Preparation and characterization of the intumescent fire retardant coating with a new flame retardant , 2009 .
[19] S. Kawamoto,et al. Thermogravimetry of wood treated with water-insoluble retardants and a proposal for development of fire-retardant wood materials , 1991 .
[20] Rongjie Yang,et al. Synergism of GUP and Boric Acid Characterized by Cone Calorimetry and Thermogravimetry , 2006 .
[21] V. Babrauskas. Heat Release In Fires , 1990 .
[22] Ove Pettersson,et al. Timber structures and fire : a review of the existing state of knowledge and research requirements , 1985 .
[23] Kathinka Leikanger Friquin,et al. Material properties and external factors influencing the charring rate of solid wood and glue‐laminated timber , 2011 .
[24] Marc Janssens,et al. Using Heat Release Rate to Assess Combustibility of Building Products in the Cone Calorimeter , 2005 .
[25] Jeffrey W. Gilman,et al. An overview of flame retardancy of polymeric materials: application, technology, and future directions , 2013 .
[26] N. Grassie,et al. The thermal degradation of polysiloxanes—Part 4: Poly(dimethyl/diphenyl siloxane) , 1980 .
[27] B. Howell. Development of additives possessing both solid-phase and gas-phase flame retardant activities , 2008 .
[28] Walter J. Murphy,et al. ADVANCES IN CHEMISTRY SERIES: Numbers 15 and 17 Demonstrate Rapidly Crowing Interest in Documentation; International Conference To Be Held in 1958 , 1956 .
[29] D. S. Es,et al. The structure–activity relationship of fire retardant phosphorus compounds in wood , 2006 .
[30] Robert H. White,et al. Fire Performance of Wood Treated With Combined Fire-Retardant and Preservative Systems , 1997 .
[31] D. Marney,et al. Fire performance of wood (Pinus radiata) treated with fire retardants and a wood preservative , 2008 .
[32] A. M. Pereyra,et al. Silica nanoparticles in high silica/alkali molar ratio solutions as fire‐retardant impregnants for woods , 2009 .
[33] Michael Spearpoint,et al. Ignition of New Zealand Wood Products in the LIFT, RIFT and ISO 5657 Apparatus using the ASTM E 1321-97 Protocol , 2008 .
[34] Kathryn M. Butler,et al. Flame retardant mechanism of silica gel/silica , 2000 .
[35] T. J. McCarthy,et al. Supercritical CO2-assisted, silicone-modified wood for enhanced fire resistance , 2009, Journal of Materials Science.
[36] S. L. Levan,et al. Chemistry of fire retardancy , 1984 .
[37] Xiaowei Zhao,et al. Optimization of sol–gel coatings on the surface of ammonium polyphosphate and its application in epoxy resin , 2012 .
[38] M. Dietenberger,et al. Wood Products: Thermal Degradation and Fire , 2001 .
[39] Baljinder K. Kandola,et al. Flame-Retardant Treatments of Cellulose and Their Influence on the Mechanism of Cellulose Pyrolysis , 1996 .
[40] J. Järnberg,et al. 143. Phosphate triesters with flame retardant properties , 2010 .
[41] H. Ramos,et al. Plasma impregnation of wood with fire retardants , 2012 .
[42] Charles A. Wilkie,et al. Fire retardancy of polymeric materials , 2000 .
[43] Johanna Tomann. Comparison of Nordtest FIRE 007, CEN draft proposal (Radiant Panel) and cone calorimeter methods in the fire testing of floor coverings , 1993 .
[44] F. L. Browne. Theories of the combustion of wood and its control , 1958 .
[45] Bernhard Schartel,et al. Development of fire‐retarded materials—Interpretation of cone calorimeter data , 2007 .
[47] Sina Pearson. Test Performed Standard Method of Test for Surface Burning Characteristics of Building Materials ASTM E84-13a Unadhered , 2011 .
[48] Malcolm Williams,et al. Toxicological profile for boron , 2010 .
[49] Claire Longuet,et al. Flame retardancy of silicone-based materials , 2009 .
[50] G. Camino,et al. Layer-by-layer assembly of silica-based flame retardant thin film on PET fabric , 2011 .
[51] Juan Li,et al. Synergistic effect between expandable graphite and ammonium polyphosphate on flame retarded polylactide , 2011 .
[52] IGNITION AND CHARRING TEMPERATURES OF WOOD , 2022 .
[53] Roger M. Rowell,et al. Thermal properties of wood reacted with a phosphorus pentoxide-amine system , 2004 .
[54] M. Collet,et al. Choosing and applying fire-retardant-treated plywood and lumber for roof designs , 1989 .
[55] S. Bourbigot,et al. Expandable graphite: A fire retardant additive for polyurethane coatings , 2003 .
[56] P. Rupper,et al. Characterization of chars obtained from cellulose treated with phosphoramidate flame retardants , 2010 .
[57] G. Malucelli,et al. Intrinsic intumescent-like flame retardant properties of DNA-treated cotton fabrics. , 2013, Carbohydrate polymers.
[58] Philippe Dubois,et al. New prospects in flame retardant polymer materials: From fundamentals to nanocomposites , 2009 .
[59] M. Noll,et al. Material resistance of flame retarded wood-plastic composites against fire and fungal decay , 2012 .
[60] Ralph M. Nussbaum,et al. The Effect of Low Concentration Fire Retardant Impregnations on Wood Charring Rate and Char Yield , 1988 .
[61] Patrick Van Hees,et al. Prediction of SBI (single burning item) test results by means of cone calorimeter test results , 1999 .
[62] L. Hollingbery. Decomposition and fire retardancy of naturally occurring mixtures of huntite and hydromagnesite , 2011 .
[63] Kojima. Structure and function , 2005 .
[64] R. F. Schwenker,et al. Chemically Modifying Cellulose for Flame Resistance , 1958 .
[65] Bernhard Schartel,et al. Phosphorus-based Flame Retardancy Mechanisms—Old Hat or a Starting Point for Future Development? , 2010, Materials.
[66] Marcelo M. Hirschler,et al. Smoke and heat release and ignitability as measures of fire hazard from burning of carpet tiles , 1992 .
[67] Jianzhang Li,et al. Effect of nitrogen phosphorus flame retardants on thermal degradation of wood , 2010 .
[68] Sumin Kim,et al. Thermal properties of bio-flour-filled polyolefin composites with different compatibilizing agent type and content , 2006 .
[69] Frits Bolonius Olesen. Fire Engineering Design of Timber Structures , 1993 .
[70] M. Gao,et al. Thermal Degradation of Wood Treated with Amino Resins and Amino Resins Modified with Phosphate in Nitrogen , 2004 .
[71] Tuula Hakkarainen,et al. Rate of Heat Release and Ignitability Indices in Predicting SBI Test Results , 2001 .
[72] Alex C. Wiedenhoeft,et al. Structure and function of wood , 2012 .
[73] A. Khelfa,et al. Investigations into the pyrolytic behaviour of birch wood and its main components: Primary degradation mechanisms, additivity and metallic salt effects , 2013 .
[74] Pedro Reszka,et al. In-depth temperature profiles in pyrolyzing wood , 2008 .
[75] J. Quintiere,et al. Predicting the burning of wood using an integral model , 2000 .
[76] J. Xin,et al. A novel halogen‐free and formaldehyde‐free flame retardant for cotton fabrics , 2012 .
[77] Shousheng Yang,et al. Flame retardance of wood treated with guanidine compounds characterized by thermal degradation behavior , 2005 .
[78] Vytenis Babrauskas,et al. Ignition of Wood: A Review of the State of the Art , 2002 .
[79] S. Liodakis,et al. Testing the retardancy effect of various inorganic chemicals on smoldering combustion of Pinus halepensis needles , 2006 .
[80] A. M. Pereyra,et al. ETHYL SILICATES WITH DIFFERENT HYDROLYSIS DEGREE LIKE NON-FLAMMABLE IMPREGNATING MATERIAL FOR WOOD , 2008 .
[81] Joseph. Green. Mechanisms for Flame Retardancy and Smoke suppression -A Review , 1996 .
[82] Robert J. Ross,et al. Wood handbook : wood as an engineering material , 2010 .
[83] R. N. Walters,et al. A microscale combustion calorimeter study of gas phase combustion of polymers , 2015 .
[84] G. Malucelli,et al. Thermal stability and flame resistance of cotton fabrics treated with whey proteins. , 2013, Carbohydrate polymers.
[85] A. M. Pereyra,et al. ResearchLetter Fire Resistance of Wood Impregnated with Soluble Alkaline Silicates , 2007 .
[86] Update for combustion properties of wood components , 2002 .
[87] X. Ji,et al. Effects of expandable graphite and ammonium polyphosphate on the flame‐retardant and mechanical properties of rigid polyurethane foams , 2009 .
[88] C. Ma,et al. Synthesis, characterization, thermal properties and flame retardance of novel phenolic resin/silica nanocomposites , 2004 .
[89] Qingwen Wang,et al. Chemical mechanism of fire retardance of boric acid on wood , 2004, Wood Science and Technology.
[90] Thin thermal barriers for wood based products to improve fire resistance , 2010 .
[91] Esko Mikkola,et al. European classes for the reaction to fire performance of wood products , 2006, Holz als Roh- und Werkstoff.
[92] Kadir Özkaya,et al. The effect of potassium carbonate, borax and wolmanit on the burning characteristics of oriented strandboard (OSB) , 2007 .
[93] Donavan Marney,et al. Combined Fire Retardant and Wood Preservative Treatments for Outdoor Wood Applications – A Review of the Literature , 2008 .
[94] N. Inagaki,et al. Flame‐retardant properties of cellulose phenylthiophosphonate , 1978 .
[95] Charles Q. Yang,et al. Textile heat release properties measured by microscale combustion calorimetry: experimental repeatability , 2012 .
[96] S. Janssen,et al. Brominated Flame Retardants : Rising Levels of Concern , 2005 .
[97] J. E. Connell,et al. Silicate–siloxane fire retardant composites , 2000 .
[98] Ondrej Grexa,et al. Flammability parameters of wood tested on a cone calorimeter , 2001 .
[99] G. Malucelli,et al. Layer by Layer coatings assembled through dipping, vertical or horizontal spray for cotton flame retardancy. , 2013, Carbohydrate polymers.
[100] T. Richard Hull,et al. Fire retardant action of mineral fillers , 2011 .