Modeling and Simulation of a Selective Laser Foaming Process for Fabrication of Microliter Tissue Engineering Scaffolds

Selective laser foaming is a novel process that combines solid-state foaming and laser ablation to fabricate an array of microliter tissue engineering scaffolds on a polymeric chip for biomedical applications. In this study, a finite element analysis (FEA) model is developed to investigate the effect of laser processing parameters. Experimental results with biodegradable polylactic acid (PLA) were used for validation. It is found that foaming always occurs before ablation, and once it occurs, the temperature increases dramatically due to an enhanced laser absorption effect of the porous structure. The geometry of the fabricated scaffolds can be controlled by laser parameters. While the depth of scaffolds can be controlled by laser power and lasing time, the diameter is more effectively controlled by the laser power. The model developed in this study can be used to optimize and control the selective foaming process. [DOI: 10.1115/1.4037425]

[1]  E. Fuchs,et al.  Socializing with the Neighbors Stem Cells and Their Niche , 2004, Cell.

[2]  Melvin Lax,et al.  Temperature rise induced by a laser beam , 1977 .

[3]  P. Joyce,et al.  A COMSOL Model of Damage Evolution Due to High Energy Laser Irradiation of Partially Absorptive Materials , 2012 .

[4]  Wei Li,et al.  Fabrication of a three-dimensional tissue model microarray using laser foaming of a gas-impregnated biodegradable polymer , 2014, Biofabrication.

[5]  Mohammad Sheikh,et al.  The Effect of Laser Beam Geometry on Cut Path Deviation in Diode Laser Chip-Free Cutting of Glass , 2010 .

[6]  Chee Yoon Yue,et al.  CO2-laser micromachining of PMMA: the effect of polymer molecular weight , 2008 .

[7]  Vipin Kumar,et al.  Low Density Sub-Critical CO2-Blown Solid-State PLA Foams , 2007 .

[8]  Radovan Kovacevic,et al.  Numerical Modeling of Heat Distribution in the Electron Beam Melting® of Ti-6Al-4V , 2013 .

[9]  Vipin Kumar,et al.  Development of Crystallization in PLA during Solid-State Foaming Process using Sub-Critical CO2 , 2012 .

[10]  S. Churchill,et al.  Correlating equations for laminar and turbulent free convection from a vertical plate , 1975 .

[11]  J. Chalmers,et al.  Characterization of the Degradation of Polylactic Acid Polymer in a Solid Substrate Environment , 1998, Biotechnology progress.

[12]  B. Wunderlich,et al.  Heat capacity of poly(lactic acid) , 2002 .

[13]  D. Ambrose,et al.  Handbook of the thermodynamics of organic compounds , 1987 .

[14]  Vipin Kumar,et al.  A method for solvent-free fabrication of porous polymer using solid-state foaming and ultrasound for tissue engineering applications. , 2006, Biomaterials.

[15]  Jin Cheng,et al.  Process Design of Laser Forming for Three-Dimensional Thin Plates , 2004 .

[16]  M. Mitchell,et al.  Cytokine regulation during the formation of the fetal-maternal interface: focus on cell-cell adhesion and remodelling of the extra-cellular matrix. , 2009, Cytokine & growth factor reviews.

[17]  D. Groulx,et al.  Solid-Liquid Phase Change Simulation Applied to a Cylindrical Latent Heat Energy Storage System , 2009 .

[18]  K. Magnusson,et al.  Extra‐cellular matrix proteins induce re‐distribution of α‐actinin‐1 and α‐actinin‐4 in A431 cells , 2007 .

[19]  Vipin Kumar,et al.  Creating Open-celled Solid-state Foams Using Ultrasound , 2009 .

[20]  C. Qiu,et al.  Strength and Phase Identification of Autogenous Laser Brazed Dissimilar Metal Microjoints , 2015 .

[21]  A. Abbott.  Cell culture: Biology's new dimension , 2003, Nature.