Intelligent fuzzy weighted input estimation method for the input force on the plate structure

The innovative intelligent fuzzy weighted input estimation method which efficiently and robustly estimates the unknown time-varying input force in on-line is presented in this paper. The algorithm includes the Kalman Filter (KF) and the recursive least square estimator (RLSE), which is weighted by the fuzzy weighting factor proposed based on the fuzzy logic inference system. To directly synthesize the Kalman filter with the estimator, this work presents an efficient robust forgetting zone, which is capable of providing a reasonable compromise between the tracking capability and the flexibility against noises. The capability of this inverse method are demonstrated in the input force estimation cases of the plate structure system. The proposed algorithm is further compared by alternating between the constant and adaptive weighting factors. The results show that this method has the properties of faster convergence in the initial response, better target tracking capability, and more effective noise and measurement bias reduction.

[1]  Sou-Chen Lee,et al.  An efficient on-line thermal input estimation method using kalman filter and recursive least square algorithm , 1997 .

[2]  Cheng-Hung Huang.  AN INVERSE NON-LINEAR FORCE VIBRATION PROBLEM OF ESTIMATING THE EXTERNAL FORCES IN A DAMPED SYSTEM WITH TIME-DEPENDENT SYSTEM PARAMETERS , 2001 .

[3]  Chih-Kao Ma,et al.  An inverse method for the estimation of input forces acting on non-linear structural systems , 2004 .

[4]  James F. Doyle,et al.  Determining the contact force during the transverse impact of plates , 1987 .

[5]  Y. Chan,et al.  A Kalman Filter Based Tracking Scheme with Input Estimation , 1979, IEEE Transactions on Aerospace and Electronic Systems.

[6]  Tsung-Chien Chen,et al.  Blast Load Input Estimation of the Medium Girder Bridgeusing Inverse Method , 2008 .

[7]  Dong-Cherng Lin,et al.  Input force estimation of a cantilever plate by using a system identification technique , 2000 .

[8]  Pan-Chio Tuan,et al.  ADAPTIVE ROBUST WEIGHTING INPUT ESTIMATION METHOD FOR THE 1-D INVERSE HEAT CONDUCTION PROBLEM , 1998 .

[9]  Ming L. Wang,et al.  Identification of force from response data of a nonlinear system , 1994 .

[10]  Dong-Cherng Lin,et al.  INPUT FORCES ESTIMATION OF BEAM STRUCTURES BY AN INVERSE METHOD , 2003 .

[11]  J. F. Doyle,et al.  Impact force location in frame structures , 1996 .

[12]  Tsung-Chien Chen,et al.  Inverse active wind load inputs estimation of the multilayer shearing stress structure , 2008 .

[13]  James F. Doyle,et al.  A genetic algorithm for determining the location of structural impacts , 1994 .

[14]  J. F. Doyle,et al.  Impact force identification from wave propagation responses , 1996 .

[15]  D. Dawe,et al.  Matrix and finite element displacement analysis of structures , 1984 .

[16]  H. R. Busby,et al.  Impact force identification using the general inverse technique , 1989 .

[17]  Tzeng-Yuan Heh,et al.  The study of structural system dynamic problems by recursive estimation method , 2006 .

[18]  Anders Ahlén.  An input estimation approach to differentiation of noisy data , 1984 .

[19]  P. Bogler.  Tracking a Maneuvering Target Using Input Estimation , 1987, IEEE Transactions on Aerospace and Electronic Systems.

[20]  P. C. Tuan,et al.  Analysis of on-line inverse heat conduction problems , 1996 .

[21]  Li-Wei Fong,et al.  AN INPUT ESTIMATION APPROACH TO ON-LINE TWO-DIMENSIONAL INVERSE HEAT CONDUCTION PROBLEMS , 1996 .

[22]  Ching-China Ji,et al.  A study on an estimation method for applied force on the rod , 2000 .

[23]  Chao Liang,et al.  A study on an estimation technique for the transverse impact of plates , 2001 .