Porous materials in building energy technologies—A review of the applications, modelling and experiments

Improving energy efficiency in buildings is central to achieving the goals set by Paris agreement in 2015, as it reduces the energy consumption and consequently the emission of greenhouse gases without jeopardising human comfort. The literature includes a large number of articles on energy performance of the residential and commercial buildings. Many researchers have examined porous materials as affordable and promising means of improving the energy efficiency of buildings. Further, some of the natural media involved in building energy technologies are porous. However, currently, there is no review article exclusively focused on the porous media pertinent to the building energy technologies. Accordingly, this article performs a review of literature on the applications, modelling and experimental studies about the materials containing macro, micro, and nano-porous media and their advantages and limitations in different building energy technologies. These include roof cooling, ground-source heat pumps and heat exchangers, insulations, and thermal energy storage systems. The progress made and the remaining challenges in each technology are discussed and some conclusions and suggestions are made for the future research.

[1]  Leon R. Glicksman,et al.  Thermal conductivity and characterization of compacted, granular silica aerogel , 2014 .

[2]  Yuehong Su,et al.  Heat transfer analysis of underground thermal energy storage in shallow trenches filled with encapsulated phase change materials , 2015 .

[3]  Qun Chen,et al.  Porosity distribution optimization of insulation materials by the variational method , 2016 .

[4]  Anjani Kumar Singh,et al.  Solar heat flux reduction through roof using porous insulation layer , 2012 .

[5]  Xiaozhou Wu,et al.  Research of heat and moisture transfer influence on the characteristics of the ground heat pump exchangers in unsaturated soil , 2016 .

[6]  Kaamran Raahemifar,et al.  Application of passive wall systems for improving the energy efficiency in buildings: A comprehensive review , 2016 .

[7]  Jianping Zhu,et al.  Preparation and properties of gypsum based energy storage materials with capric acid–palmitic acid/expanded perlite composite PCM , 2015 .

[8]  João A. Labrincha,et al.  Lightweight dense/porous PCM-ceramic tiles for indoor temperature control , 2015 .

[9]  K. Nagano,et al.  Experimental study of the performance of porous materials to moderate the roof surface temperature by its evaporative cooling effect , 2009 .

[10]  K. Gopalakrishnan,et al.  A Mathematical Model for Predicting Isothermal Soil Moisture Profiles Using Finite Difference Method , 2007 .

[11]  Sufen Li,et al.  Analysis of geo-temperature recovery under intermittent operation of ground-source heat pump , 2011 .

[12]  Xiaoguang Yang,et al.  Experimental investigation on high temperature anisotropic compression properties of ceramic-fiber-reinforced SiO2 aerogel , 2013 .

[13]  Saffa Riffat,et al.  Mathematical model of indirect evaporative cooler using porous ceramic and heat pipe , 2004 .

[14]  Dominique Baillis,et al.  Heat transfer modeling in vacuum insulation panels containing nanoporous silicas—A review , 2012 .

[15]  Weibo Yang,et al.  Numerical evaluation on the effects of soil freezing on underground temperature variations of soil around ground heat exchangers , 2015 .

[16]  Z. Fang,et al.  Heat transfer in ground heat exchangers with groundwater advection , 2004 .

[17]  D. A. Neeper.  Potential benefits of distributed PCM thermal , 1989 .

[18]  E. Cassedy,et al.  Prospects for Sustainable Energy , 2000 .

[19]  Amaryllis Audenaert,et al.  Improving the energy performance of residential buildings: A literature review , 2015 .

[20]  B. Su,et al.  Hierarchically Structured Porous Materials for Energy Conversion and Storage , 2012 .

[21]  N. Pan,et al.  Thermo-physical properties of polyester fiber reinforced fumed silica/hollow glass microsphere composite core and resulted vacuum insulation panel , 2016 .

[22]  Huijun Wu,et al.  Engineering Thermal and Mechanical Properties of Multilayer Aligned Fiber-Reinforced Aerogel Composites , 2014 .

[23]  Ya-Ling He,et al.  Evaluation and optimization of melting performance for a latent heat thermal energy storage unit partially filled with porous media , 2017 .

[24]  Saffa Riffat,et al.  Optimizing insulation thickness and analysing environmental impacts of aerogel-based thermal superinsulation in buildings , 2014 .

[25]  Shang-Lien Lo,et al.  Review on energy savings by solar control techniques and optimal building orientation for the strategic placement of façade shading systems , 2017 .

[26]  Arild Gustavsen,et al.  Vacuum insulation panels for building applications: A review and beyond , 2010 .

[27]  Hui Li,et al.  Preparation and characteristics of n-nonadecane/cement composites as thermal energy storage materials in buildings , 2010 .

[28]  Darryl Dickerhoff,et al.  Effects of airflow infiltration on the thermal performance of internally insulated ducts , 2000 .

[29]  Arild Gustavsen,et al.  Phase Change Materials for Building Applications: A State-of-the-Art Review , 2010 .

[30]  Bin Zhou,et al.  Simulation and experimental validation of soil cool storage with seasonal natural energy , 2013 .

[31]  M. Ha-Duong,et al.  Climate change 2014 - Mitigation of climate change , 2015 .

[32]  Uroš Stritih,et al.  Heat transfer enhancement in latent heat thermal storage system for buildings , 2003 .

[33]  Simon Roberts,et al.  Altering existing buildings in the UK , 2008 .

[34]  J. Fořt,et al.  Modified lime-cement plasters with enhanced thermal and hygric storage capacity for moderation of interior climate , 2016 .

[35]  A. Bejan,et al.  Convection in Porous Media , 1992 .

[36]  A. Sari,et al.  Capric–myristic acid/expanded perlite composite as form-stable phase change material for latent heat thermal energy storage , 2008 .

[37]  Xiong Zhang,et al.  Preparation technology of phase change perlite and performance research of phase change and temperature control mortar , 2014 .

[38]  A. Lai,et al.  Review of analytical models for heat transfer by vertical ground heat exchangers (GHEs): A perspective of time and space scales , 2015 .

[39]  N. V. Peskov,et al.  Estimation of the thermal effect of ground moisture condensation on heat transfer outside a geothermal borehole , 2014 .

[40]  Fred Edmond Boafo,et al.  Configured cavity-core matrix for vacuum insulation panel: Concept, preparation and thermophysical properties , 2015 .

[41]  Ahmet Sarı,et al.  Thermal energy storage properties and thermal reliability of some fatty acid esters/building material composites as novel form-stable PCMs , 2012 .

[42]  Ken-ichi Kurumada,et al.  Closed-porosity mesoporous silica produced by high temperature rapid drying , 2004 .

[43]  L. Gosselin,et al.  Numerical analysis of thermal response tests with a groundwater flow and heat transfer model , 2011 .

[44]  Bing Zhang,et al.  Preparation of capric acid/halloysite nanotube composite as form-stable phase change material for thermal energy storage , 2011 .

[45]  Y. Grohens,et al.  Mechanical and thermal insulation properties of elium acrylic resin/cellulose nanofiber based composite aerogels , 2017 .

[46]  Jinfeng Mao,et al.  Heat transfer analysis of a vertical ground heat exchanger using numerical simulation and multiple regression model , 2016 .

[48]  Antonio F. Miguel,et al.  Porous materials to control climate behaviour of enclosures: an application to the study of screened greenhouses , 2000 .

[49]  Tianxi Liu,et al.  Mechanically strong polyimide / carbon nanotube composite aerogels with controllable porous structure , 2018 .

[50]  Farah Souayfane,et al.  Phase change materials (PCM) for cooling applications in buildings: A review , 2016 .

[51]  R. J. Kedl,et al.  Activities in support of the wax-impregnated wallboard concept , 1989 .

[52]  Zhishen Wu,et al.  Study on preparation and thermal property of binary fatty acid and the binary fatty acids/diatomite composite phase change materials , 2011 .

[53]  Sughwan Kim,et al.  Thermal characteristics of mortar containing hexadecane/xGnP SSPCM and energy storage behaviors of envelopes integrated with enhanced heat storage composites for energy efficient buildings , 2014 .

[54]  S. Lykoudis,et al.  Experimental work on a linked, dynamic and ventilated, wall component , 2004 .

[55]  Mohammed S. Imbabi,et al.  A passive–active dynamic insulation system for all climates , 2012 .

[56]  Sumin Kim,et al.  Thermal performance of organic PCMs/micronized silica composite for latent heat thermal energy storage , 2014 .

[57]  Bjørn Petter Jelle,et al.  Traditional, state-of-the-art and future thermal building insulation materials and solutions Prope , 2011 .

[58]  M. Assimakopoulos,et al.  Solar cooling with aluminium pillared clays , 2011 .

[59]  Jesús Lizana,et al.  Advanced low-carbon energy measures based on thermal energy storage in buildings: A review , 2018 .

[60]  Martin Tenpierik,et al.  Vacuum Insulation Panels Applied in Building Constructions , 2010 .

[61]  P. Blum,et al.  Numerical sensitivity study of thermal response tests , 2012 .

[62]  E. Bernardo,et al.  White sintered glass-ceramic tiles with improved thermal insulation properties for building applications , 2017 .

[63]  Peng Liu,et al.  Preparation and characterization of aerogel/expanded perlite composite as building thermal insulation material , 2018 .

[64]  D. Karamanis.  Solar cooling with hydrophilic porous materials for reducing building cooling needs , 2015 .

[65]  Qinglin Meng,et al.  Roof cooling effect with humid porous medium , 2005 .

[66]  Paulo Santos,et al.  Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency , 2013 .

[67]  Xudong Cheng,et al.  Porous thermal insulation materials derived from fly ash using a foaming and slip casting method , 2014 .

[68]  Chao-Hsin Lin,et al.  Measuring moisture content in a porous insulation material using a hot wire , 2015 .

[69]  I. O. Salyer,et al.  Development of PCM wallboard for heating and cooling of residential buildings , 1989 .

[70]  Luca Evangelisti,et al.  A review of structural, thermo-physical, acoustical, and environmental properties of wooden materials for building applications , 2017 .

[71]  Nasrudin Abd Rahim,et al.  Novel approaches and recent developments on potential applications of phase change materials in solar energy , 2018 .

[72]  A. Dupuy,et al.  Thermal performance of a deep borehole heat exchanger: Insights from a synthetic coupled heat and flow model , 2015 .

[73]  M. A. Hashemi,et al.  Analytical solution of discontinuous heat extraction for sustainability and recovery aspects of borehole heat exchangers , 2015 .

[74]  Zhishen Wu,et al.  Preparation and properties of gypsum-based heat storage and preservation material , 2011 .

[75]  Dominique Baillis,et al.  Mass transfer modeling in gas barrier envelopes for vacuum insulation panels: A review , 2012 .

[76]  Rehan Sadiq,et al.  Improving the energy efficiency of the existing building stock: A critical review of commercial and institutional buildings , 2016 .

[77]  C. Evangelides,et al.  Estimation of Soil Moisture Profile and Diffusivity Using Simple Laboratory Procedures , 2010 .

[78]  Dorel Feldman,et al.  Latent heat storage in building materials , 1993 .

[79]  Ali J. Chamkha,et al.  Nanofluid flow and heat transfer in porous media: A review of the latest developments , 2017 .

[80]  A. Sari,et al.  Preparation, thermal properties and thermal reliability of palmitic acid/expanded graphite composite as form-stable PCM for thermal energy storage , 2009 .

[81]  Per Heiselberg,et al.  Review of thermal energy storage technologies based on PCM application in buildings , 2013 .

[82]  V. Nemanič,et al.  New organic fiber-based core material for vacuum thermal insulation , 2015 .

[83]  Yafei Zhang,et al.  Shape-stabilized phase change materials based on fatty acid eutectics/expanded graphite composites for thermal storage , 2015 .

[84]  C. Webb,et al.  Roof cooling by direct evaporation from a porous layer , 2016 .

[85]  H. Paksoy,et al.  Review on using microencapsulated phase change materials (PCM) in building applications , 2015 .

[86]  D. Bentz,et al.  Potential applications of phase change materials in concrete technology , 2007 .

[87]  K. Peippo,et al.  A multicomponent PCM wall optimized for passive solar heating , 1991 .

[88]  Su Huang.  Energy performance evaluation and optimisation of ground source heat pump systems , 2015 .

[89]  T. Ohmura,et al.  Rapid thermal conductivity measurement of porous thermal insulation material by laser flash method , 2016 .

[90]  Peter Kuster,et al.  Principles Of Heat Transfer In Porous Media , 2016 .

[91]  Geoffrey B. Smith,et al.  Polymeric mesh for durable infra-red transparent convection shields: Applications in cool roofs and sky cooling , 2013 .

[92]  Songyu Liu,et al.  Experimental study on heat and moisture transfer in soil during soil heat charging for solar-soil source heat pump compound system , 2014 .

[93]  M. Kaviany.  Principles of heat transfer in porous media , 1991 .

[94]  N. Gupta,et al.  Processing and compressive properties of aerogel/epoxy composites , 2008 .

[95]  A. Carotenuto,et al.  Models for thermo-fluid dynamic phenomena in low enthalpy geothermal energy systems: A review , 2016 .

[96]  E. Hahne,et al.  Measurements of Thermal Conductivity in Porous Media , 1991 .

[97]  C. Rode,et al.  Non-isothermal Moisture Transport Through Insulation Materials , 2008 .

[98]  C.Y. Jim,et al.  Modeling the heat diffusion process in the abiotic layers of green roofs , 2011 .

[99]  Khamid Mahkamov,et al.  Passive thermal control in residential buildings using phase change materials , 2016 .

[100]  Richard P. Chartoff,et al.  Advanced phase-change materials for passive solar storage applications: Final report. [C-16 to C-24 alkyl hydrocarbons] , 1986 .

[101]  M. Dong,et al.  Analysis of a ground source heat pump system using an unsaturated 3-dimensional model , 2017 .

[102]  M. Bahrami,et al.  Deformation and thermal resistance study of aerogel blanket insulation material under uniaxial compression , 2016 .

[103]  Zhishen Wu,et al.  Study on preparation and thermal properties of binary fatty acid/diatomite shape-stabilized phase change materials , 2011 .

[104]  Mukesh Limbachiya,et al.  Vacuum insulation panels (VIPs) for building construction industry: a review of the contemporary developments and future directions , 2011 .

[105]  Lei Zhang,et al.  The impact of evaporation from porous tile on roof thermal performance: A case study of Guangzhou's climatic conditions , 2017 .

[106]  G. Fang,et al.  Preparation and thermal properties of n-octadecane/molecular sieve composites as form-stable thermal energy storage materials for buildings , 2012 .

[107]  R. Ooka,et al.  Effect of natural convection on thermal response test conducted in saturated porous formation: Comparison of gravel-backfilled and cement-grouted borehole heat exchangers , 2016 .

[108]  Wei Chen,et al.  Thermal analysis on the cooling performance of a porous evaporative plate for building , 2010 .

[109]  Nathan Mendes,et al.  Numerical analysis of passive cooling using a porous sandy roof , 2013 .

[110]  Kiyoshi Okada,et al.  Water-retention properties of porous ceramics prepared from mixtures of allophane and vermiculite for materials to counteract heat island effects , 2008 .

[111]  Arif Hepbasli,et al.  Energy and exergy analyses of porous baffles inserted solar air heaters for building applications , 2013 .

[112]  Wei Chen,et al.  Thermal analysis on the cooling performance of a wet porous evaporative plate for building , 2011 .

[113]  Saffa Riffat,et al.  Performance of porous ceramic evaporators for building cooling application , 2003 .

[114]  Ahmet Sarı,et al.  Preparation, thermal properties and thermal reliability of capric acid/expanded perlite composite for thermal energy storage , 2008 .

[115]  A. Sari.  Composites of polyethylene glycol (PEG600) with gypsum and natural clay as new kinds of building PCMs for low temperature-thermal energy storage , 2014 .

[116]  Cinzia Buratti,et al.  Thermal and Acoustic Performance Evaluation of New Basalt Fiber Insulation Panels for Buildings , 2015 .

[117]  Ni Zhang,et al.  Preparation and thermal energy storage properties of paraffin/expanded graphite composite phase change material , 2012 .

[118]  A. K. D. Silva,et al.  Experimental testing of a passive, evaporation-based roof cooling system , 2014 .

[119]  N. Nahar,et al.  Studies on solar passive cooling techniques for arid areas , 1999 .

[120]  Hsin-Hsin Hsieh,et al.  Performance of low series-resistance interconnections on the polycrystalline solar cells , 2011 .

[121]  V. Vinayaka Ram,et al.  PCM-mortar based construction materials for energy efficient buildings: A review on research trends , 2018 .

[122]  David Banks,et al.  Practical Engineering Geology , 2008 .

[123]  Jun Zhao,et al.  Experimental investigation and theoretical model of heat transfer of saturated soil around coaxial ground coupled heat exchanger , 2008 .

[124]  Dawid Taler,et al.  Numerical and experimental study of a solid matrix Electric Thermal Storage unit dedicated to environmentally friendly residential heating system , 2016 .

[125]  Yajun Lv,et al.  Experimental and numerical study on thermal energy storage of polyethylene glycol/expanded graphite composite phase change material , 2016 .

[126]  Paul Bourdoukan,et al.  Competitive high performance Aerogel-Based Composite material for the European insulation market , 2017 .

[127]  Erik Bardy,et al.  Thermal Conductivity and Compressive Strain of Aerogel Insulation Blankets Under Applied Hydrostatic Pressure , 2007 .

[128]  J. A. Esfahani,et al.  A review on the applications of porous materials in solar energy systems , 2017 .

[129]  José Manuel Andújar Márquez,et al.  Ground Thermal Diffusivity Calculation by Direct Soil Temperature Measurement. Application to very Low Enthalpy Geothermal Energy Systems , 2016, Sensors.

[130]  T. Akiyama,et al.  Impregnation of porous material with phase change material for thermal energy storage , 2009 .

[131]  Xinxing Lin,et al.  Thermal performance improvement of a horizontal ground-coupled heat exchanger by rainwater harvest , 2016 .