Shake-Table Studies of a Four-Span Bridge Model with Advanced Materials

As part of a major study on the seismic response of bridge systems with conventional and advanced details, a large-scale model of a 4-span bridge incorporating several innovative plastic hinges was recently tested on shake tables at the University of Nevada, Reno. The bridge model included six columns, each pair of which utilized a different unconventional detail at the bottom plastic hinges: shape memory alloys (SMAs), engineered cementitious composites (ECCs), elastomeric pads embedded into columns, and posttensioning tendons. The bridge model was subjected to two horizontal components of simulated earthquake records of the 1994 Northridge earthquake in California. More than 340 channels of data were collected. Test results showed the effectiveness of the innovative materials in reducing damage and permanent displacements. The damage was minimal in plastic hinges with SMA/ECC and those with built-in elastomeric pads. Conventional reinforced concrete plastic hinges were severely damaged because of spalling of concrete and rupture of longitudinal and transverse reinforcement.

[1]  Gregor Fischer,et al.  DEFORMATION BEHAVIOR OF FIBER-REINFORCED POLYMER REINFORCED ENGINEERED CEMENTITIOUS COMPOSITE (ECC) FLEXURAL MEMBERS UNDER REVERSED CYCLIC LOADING CONDITIONS , 2003 .

[2]  Sarah L. Billington,et al.  Cyclic Response of Unbonded Posttensioned Precast Columns with Ductile Fiber-Reinforced Concrete , 2004 .

[3]  J. Mander,et al.  Theoretical stress strain model for confined concrete , 1988 .

[4]  Sarah L. Billington,et al.  Unbonded Posttensioned Concrete Bridge Piers. II: Seismic Analyses , 2003 .

[5]  Marc O. Eberhard,et al.  Seismic Testing of a Two-Span Reinforced Concrete Bridge , 2008 .

[6]  Yun Mook Lim,et al.  Repair and retrofit with engineered cementitious composites , 2000 .

[8]  M. Saiid Saiidi,et al.  Pre-test Analytical Studies of NEESR-SG 4-Span Bridge Model Using OpenSees , 2007 .

[9]  Sarah L. Billington,et al.  Unbonded Posttensioned Concrete Bridge Piers. I: Monotonic and Cyclic Analyses , 2003 .

[10]  Stephen A. Mahin,et al.  Use of Partially Prestressed Reinforced Concrete Columns to Reduce Post-Earthquake Residual Displacements of Bridges , 2006 .

[11]  M. Saiid Saiidi,et al.  Pilot Study of Behavior of Concrete Beams Reinforced with Shape Memory Alloys , 2007 .

[12]  John C. Wilson,et al.  Shape Memory Alloys for Seismic Response Modification: A State-of-the-Art Review , 2005 .

[13]  Robert B. Nelson.  Experimental evaluation of performance of conventional bridge systems , 2007 .

[14]  Mehdi S. Saiidi,et al.  Experimental and Analytical Seismic Studies of a Four-Span Bridge System with Innovative Materials , 2010 .

[15]  P B Lindley,et al.  Compression moduli for blocks of soft elastic material bonded to rigid end plates , 1979 .

[16]  M. Saiid Saiidi,et al.  Cyclic Response of Concrete Bridge Columns Using Superelastic Nitinol and Bendable Concrete , 2009 .

[17]  M. Saiidi,et al.  Exploratory Study of Seismic Response of Concrete Columns with Shape Memory Alloys Reinforcement , 2006 .

[18]  Sarira Motaref,et al.  Experimental Study of Precast Bridge Columns with Built-In Elastomer , 2010 .