Vibration control of flexible joint manipulator using input shaping with PD-type Fuzzy Logic Control

This paper presents investigations into the development of input shaping with Proportional-Derivative (PD)-type Fuzzy Logic Control for trajectory tracking and vibration control of a flexible joint manipulator. To study the effectiveness of the controllers, a PD-type Fuzzy Logic Controller is developed for tip angular position control of a flexible joint manipulator. This is then extended to incorporate input shaper control schemes for vibration reduction of the flexible joint system. The positive zero-vibration-derivative-derivative (ZVDD) and new modified specified negative amplitude zero-vibration-derivative-derivative (SNA-ZVDD) input shapers are then designed based on the properties of the system for vibration control. The new SNA-ZVDD is proposed to improve the robustness capability while increasing the speed of the system response. Simulation results of the response of the flexible joint manipulator with the controllers are presented in time and frequency domains. The performances of the PD-type Fuzzy Logic with input shaping control schemes are examined in terms of input tracking capability, level of vibration reduction, robustness and time response specifications. A comparative assessment of the positive ZVDD and modified SNA-ZVDD shapers to the hybrid system performance is presented and discussed.

[1]  P. Tomei.  A simple PD controller for robots with elastic joints , 1991 .

[2]  Woosoon Yim,et al.  Adaptive control of a flexible joint manipulator , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[3]  Je Sung Yeon,et al.  Practical Robust Control for Flexible Joint Robot Manipulators , 2008 .

[4]  Warren P. Seering,et al.  DESIGN AND IMPLEMENTATION OF TIME-OPTIMAL NEGATIVE INPUT SHAPERS , 1994 .

[5]  Mohd Ashraf Ahmad.  Vibration and Input Tracking Control of Flexible Manipulator Using LQR with Non-Collocated PID Controller , 2008, 2008 Second UKSIM European Symposium on Computer Modeling and Simulation.

[6]  Lih-Chang Lin,et al.  Control of flexible joint robots via external linearization approach , 1990, J. Field Robotics.

[7]  Fathi H. Ghorbel,et al.  Adaptive control of flexible-joint manipulators , 1989, IEEE Control Systems Magazine.

[8]  Jin S. Lee,et al.  Control of Flexible Joint Robot System by Backstepping Design Approach , 1999, Intell. Autom. Soft Comput..

[9]  M. O. Tokhi,et al.  Techniques for vibration control of a flexible robot manipulator , 2006, Robotica.

[10]  William Singhose,et al.  Command generation using specified-negative-amplitude input shapers , 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).

[11]  Petar V. Kokotovic,et al.  An integral manifold approach to the feedback control of flexible joint robots , 1987, IEEE J. Robotics Autom..